Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-23T15:40:58.936Z Has data issue: false hasContentIssue false
  • English
  • Français

Integration of Land Use Aspects into Life Cycle Assessment at the Example of Biofuels

Published online by Cambridge University Press:  01 February 2011

Michael Held  and
Ulrike Bos
Michael Held
Affiliation:
[email protected], Universität Stuttgart, Life Cycle Engineering, Hauptstrasse 113, Echterdingen, 70771, Germany, +4971148999929, +4971148999911
Ulrike Bos
Affiliation:
[email protected], Universitaet Stuttgart, Chair of Buliding Physics (LBP), Life Cycle Engineering, Hauptstrasse 113, Leinfelden-Echterdingen, 70771, Germany
Get access

Abstract

It is well known that the transport sector causes significant environmental impacts worldwide and as a consequence influences the results of Life Cycle Assessment (LCA) studies. Today's fuels are dominated by crude oil derived fuels. In Europe currently 98 % of the road transportation is based on such crude oil derived fuels. Similar ratios can be observed e.g. in the US and other countries. In addition to the environmental impacts, the high dependency on the imports of fossil fuels motivates most European countries to investigate in other than fossil fuel based transport systems. Therefore the European Commission presented an action plan including a strategy with the objective to substitute 20% of crude oil derived fuels by alternative fuel until 2020. To achieve these goals, actions to reduce the import dependency of fuels, the usage of non renewable (fossil) resources and the environmental burdens connected to the use of fuel / propulsion systems have to be addressed. Besides, the energy carrier mix has to be broadened. Especially alternative fuels from renewable resources, BtL (Biomass to Liquid) are supposed to have a high potential.

Recent developments show, that there is a variety of options for fuels available as well as for propulsion technologies that utilize fuels based on renewable resources. It is therefore of key importance to select and promote the fuel/ propulsion system technology which is most beneficiary for a country or region from an environmental but also from an economic and social perspective. For such a sustainability evaluation it is essential to consider the local/regional boundary conditions such as availability of fuel resources, major pollution issues which need to be addressed, supply of secondary energy (e.g. power) etc. LCA is therefore a suitable approach to evaluate and compare different options, due to its transparent consideration of all life cycle stages.

Besides the environmental impacts and resource consumption which are addressed in LCA considerations the needed land is another important aspect when talking about biomass as a resource. As land is a scarce resource that is used for all industry sectors there is a need to address this issue also in LCA. Up to now, no commonly agreed upon methods exist which allow the integration of land use aspects in a consistent way into LCA Software and Database. Currently at LBP-GaBi, University of Stuttgart together with PE International, a method is developed to integrate land use aspects into LCA. Backward processes are now implemented in an applicable way into a LCA database system.

This Paper describes the main approach of the developed methodology for land use consideration within LCA.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1041: Symposium R – Life-Cycle Analysis for New Energy Conversion and Storage Systems , 2007 , 1041-R05-02
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Baitz, M.: Die Bedeutung der funktionsbasierten Charakterisierung von Flächen-Inanspruchnahme in industriellen Prozesskettenanalysen, Dissertation, Universität Stuttgart, 2002.Google Scholar
2. Baitz, M.; Kreissig, J.; Wolf, M.: Method for integrating Land Use into Life Cycle Assessment (LCA), Forstwissenschaftliches Centralblatt 119, 2000, Blackwell Wissenschafts-Verlag, 128–149.Google Scholar
3.ISO/FDIS 14040 Environmental Management – Life Cycle Assessment – Principles and Framework, 2006.Google Scholar
4.IKP, PE: GaBi 4 Software-System and Databases for Life Cycle Engineering. Copyright, TM Stuttgart, Echterdingen.Google Scholar
5. Seidel, U.; Braune, A.; Fischer, M.; Baitz, M.; Kreissig, J.: Integrating Land Use into LCA Methodology, SETAC North America Annual Meeting; 5 - 9 November 2006, Montŕal, Canada.Google Scholar
6. Schuller, O.; Seidel, U.; Makishi, C.: Addressing Land Use in Life Cycle Assessment - Cilca, Conference 2007 in Sao Paulo, 2007.Google Scholar
7. Seidel, U.; Braune, A.; Fischer, M.; Kreissig, J.; Baitz, M.: Land Use indicators in LCA – demonstrating an applicable approach (poster), SETAC Europe 17th Annual Meeting, Porto, May 20-24, 2007.Google Scholar
8. Bos (Seidel), U.: Implementierung von Flächeninanspruchnahme in die Ökobilanz, Vortrag Ökobilanzwerkstatt Netzwerk Lebenszyklusdaten Bad Urach, 26.-27. September 2007.Google Scholar