Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-27T02:38:36.008Z Has data issue: false hasContentIssue false
  • English
  • Français

In Situ Low Temperature Cleaning and Passivation of Silicon by Remote Hydrogen Plasma for Silicon-Based Epitaxy

Published online by Cambridge University Press:  25 February 2011

S. Banerjee ,
A. Tasch ,
T. Hsu ,
R. Qian ,
D. Kinosky ,
J. Irby ,
A. Mahajan  and
S. Thomas
S. Banerjee
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
A. Tasch
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
T. Hsu
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
R. Qian
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
D. Kinosky
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
J. Irby
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
A. Mahajan
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
S. Thomas
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
Get access

Abstract

Remote Plasma-enhanced Chemical Vapor Deposition (RPCVD), which involves nonthermal, remote plasma excitation of precursors, has been demonstrated to be a novel and attractive technique for low temperature (150-450C) Si and Sil-xGex epitaxy for applications in Si ULSI and novel Si heterostructure devices which require compact doping profiles and/or heterointerfaces. An in situ low temperature remote hydrogen plasma clean in the Ultra-High Vacuum (UHV) deposition chamber in order to achieve a chemically passive, hydrogenated Si surface with minimal O, C and N contamination, is a critical component of the process. The ex situ wet chemical cleaning consists of ultrasonic degreasing and a modified RCA clean, followed by a final dilute HF dip. The in situ clean is achieved by remote plasma excited H, where H introduced through the plasma column is r-f excited such that the plasma glow does not engulf the wafer. In situ AES analysis shows that the remote H plasma clean results in very substantial reduction of the C, O and N contamination on the Si surface. We believe that the H plasma produces atomic H which, in turn, produces a reducing environment and has a slight etching effect on Si and SiO2 by converting them to volatile byproducts. TEM analysis of the wafers subjected to this clean indicate that defect-free surfaces with dislocation loop densities below TEM detection limits of 105 /cm2 are achievable. Corroborating evidence of achieving an atomically clean, smooth Si surface by remote H plasma clean as obtained from in situ RHEED analysis will also be presented. After in situ H cleaning at low pressures (45 mTorr), typically for 30 min. at a substrate temperature of 310 C, we observe both stronger integral order streaks compared to the as-loaded sample and the appearance of less intense half-order lines indicative of a (2 × 1) reconstruction pattern, indicating a monohydride termination. A (3 × 1) reconstruction pattern is observed upon H plasma clean at lower temperatures (250 C), which can be attributed to an alternating monohydride and dihydride termination. Results of air exposure of hydrogenated Si surfaces by AES analysis indicate that the (3 × l) termination is chemically more inert towards readsorption of C and 0. Successful Si homoepitaxy and Si/Sil-xGex heteroepitaxy under a variety of surface cleaning conditions prove that by a combination of these cleaning techniques, and by exploiting the inertness of the H-passivated Si surface, very low defect density films with 0 and C levels as low as 1X1018 cm−3 and 5×1017 cm−3, respectively, can be achieved.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 259: Symposium B – Chemical Surface Preparation, Passivation and Cleaning for Semiconductor Growth and Processing , 1992 , 43
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Fountain, G., Rudder, R., Hattangady, S., Vitkavage, D. and Markunas, R., AIP Conf. Proc. No. 167, AVS Series 4, p.338, 1988.Google Scholar
[2] Breaux, L., Anthony, B., Hsu, T., Banerjee, S., and Tasch, A., Appl. Phys. Lett., 55(18), 1885, 1989.CrossRefGoogle Scholar
[3] Anthony, B., Hsu, T., Qian, R., Irby, J., Banerjee, S., and Tasch, A., J. of Electronic Materials, 20(40, 309, 1991.CrossRefGoogle Scholar
[4] Takahagi, T., Nagai, I., Ishitani, A., Kuroda, H., and Nagasawa, Y., J. Appl. Phys., 64, 3516, 1988.CrossRefGoogle Scholar
[5] Anthony, B., Breaux, L., Hsu, T., Banerjee, S., and Tasch, A., J. of Vac. Sci. Technol., B7(4), 621, 1989.Google Scholar
[6] Gupta, P., Mak, C., Coon, P. and George, S., Phys. RevB, 40(11), 7739, 1989.CrossRefGoogle Scholar
[7] Gates, S., Kunz, R., and Greenlief, C., Surface Science, 207, 364, 1989.CrossRefGoogle Scholar
[8] Meyerson, B. S., Appl. Phys. Lett., 48, 797, 1986.Google Scholar
[9] Chabal, Y., Higashi, G., Raghavachari, K., and Burrow, V., J. Vac. Sci. Technol. A7, 2104, 1989.Google Scholar
[10] Ruzyllo, J., Sol. Stat. Tech., p.S1, Mar. 1990.Google Scholar
[11] Fenner, D., Biegelsen, D., and Bringans, R., J. Appl. Phys. 66, 419, 1989.CrossRefGoogle Scholar
[12] Kunitsugu, Y., Suemune, I., Tanaka, Y., Kan, Y., and Yamanishi, M., 5th International Conference on Molecular Beam Epitaxy, Sapporo, Japan, 1988, Vol. 134.Google Scholar
[13] Tu, C., Chang, R., and Schlier, A., Appl. Phys. Lett. 41, 80, 1982.CrossRefGoogle Scholar
[14] Fountain, G., Rudder, R., Hattangady, S., Vitkavage, D., and Markunas, R., AIP, Conference Proceedings, 167, 338, 1988.CrossRefGoogle Scholar
[15] Nanochem is a trademark of SemiGas Corp..Google Scholar
[16] Massey, H., Burhop, E., and Gilbody, H., Electronic and Ionic Impact Phenomena, 2nd Edition, Clarendon Press, Oxford, 1969-1974.Google Scholar
[17] Chabal, Y. and Raghavachari, K., Phys. Rev. Lett., 54, 1055, 1985.Google Scholar
[18] Boland, J., Phys. Rev. Lett., 65(19), 3325, 1990.CrossRefGoogle Scholar
[19] Ravi, K. V., “Imperfections and Impurities in Semiconductor Silicon,” Wiley, New York, 1981.Google Scholar
[20] Hirayama, H. and Tatsumi, T., Appl. Phys. Lett., 54(16), 1561, 1989.Google Scholar
[21] Schulze, G. and Henzler, M., Surface Science, 124, 337, 1983.Google Scholar
[22] Wise, M., Koehler, B., Gupta, P., Coon, P. and George, S., Surf. Sci., 258, 166 1991.Google Scholar
[23] Schaefer, J., Stucki, F., Frankel, D., Gopel, W., and Lapeyre, G., J. Vac. Sci. Technol., B2, 359, 1984.Google Scholar
[24] Yamazaki, T., Watanabe, S. and Ito, T., J. Electrochem. Soc., 137, 1990.Google Scholar