Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-29T07:00:37.005Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of CMP Pad Exposure to Aqueous Media on the Pad Properties. Part 1. Dynamic Mechanical and Modulated DSC Analysis

Published online by Cambridge University Press:  01 February 2011

A. Tregub ,
M. Moinpour  and
J. Sorooshian
A. Tregub
Affiliation:
Intel Corporation, Fab Material Operations, Santa Clara, CA.
M. Moinpour
Affiliation:
Intel Corporation, Fab Material Operations, Santa Clara, CA.
Get access

Abstract

Soaking of polyurethane-based CMP pad in oxide slurry, de-ionized water, and pH buffer solution, and its effect on thermal and mechanical properties of the pads was studied using Dynamic Mechanical Analysis and Modulated Differential Scanning Calorimetry. Pad softening due to soaking was established, and softening mechanisms are discussed. Diffusion of the aqueous medias to polyurethane pad was described using Fickian diffusion model.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 732: Symposium I – Chemical-Mechanical Planarization , 2002 , I5.4
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Ouma, D. et al. “Wafer-Scale Modeling of Pattern Effect in Oxide Chemical Mechanical Polishing”, SPIE Microelectronics Conference, Microelectronic Device Technology Session, Austin, TX, October 1997, Conf. Proceedings, pp. 1- 12 (1997).Google Scholar
2. Steigerwald, J. M., Murarka, S.P., Gutmann, R.J.. “Chemical Mechanical Planarization of Microelectronics Materials”, John Wiley & Sons, Inc., New York-Chichester-Weinheim -Brisbane-Singapore-Toronto, (1997).Google Scholar
3.3-Tseng, Wei-Tsu, Liu, Chi-Wen, Dai, Bau-Tong, Yeh, Ching-Fa, Thin Solid Films, 290-291, 58–463 (1996)Google Scholar
4. Zhou, Yi-yang, Davis, E.C., Material Science and Engineering, B68, 91–98 (1999),Google Scholar
5. Liang, H., Kaufman, F., Sevilla, R., Anjur, S., Wear 211, 271–279 (1997).Google Scholar
6. Thakurta, D.G., Borst, C.L., Schwendeman, D.W., Gutmann, R.J., Gill, W.N., Thin Solid Films 366, 181–190 (2000).Google Scholar
7. Shi, F.G. and Zhao, B.. Appl. Phys., 249-252 A67, (1998); F.G. Shi, Bin Zhao, Shi-Qing Wang, IEEE/IITC Conference-98,. 73-75 (1998)Google Scholar
8. Huey, S., Mear, S.T., Wang, Y., Jin, R.R., IEEE/SEMI Advanced Semiconductor Manufacturing Conference, 54-58 (1999).Google Scholar
9. Tregub, A., Moinpour, M., and Sorooshian, J.. Proceedings of CMPUG Annual Symposium, October 11, 2001, Santa Clara, CA (2001).Google Scholar
10. Tregub, A., Moinpour, M., and Sorooshian, J.. Proceedings of 18-thVMIC November 2001, Santa Clara, CA, 275–280 (2001)Google Scholar
11. Moinpour, M., Tregub, A.. AVS 3-rd International Conference on Microelectronics and Interfaces, February 11-14, Santa Clara, CA. 72–74 (2002).Google Scholar
12. Li, Weidan, Shin, Dong Wook, Tomozawa, M., S,. Murarka, P., Thin Solid Films 270, 601–606 (1995)Google Scholar
13. Wang, Y.-L., Liu, C., Feng, M.-S., Tseng, W.-T, Materials Chemistry and Physics, 52 17–22. (1998).Google Scholar
14. Tregub, A. and Renolayan, A., CDCC'98, Sherbrooke, Quebec, Canada, August 1998, 129-137 (1998)Google Scholar
15. Morii, T., Hamada, H., Maekawa, Z., Tanimoto, T., Hirano, T., and Kiyusumi, K., Composite Structures, 25, 95–100, 1993 Google Scholar
16. Lagrange, A., Melennec, Ch., and Jacquemet, R., “Durability of Polymer Based Composite Systems for Structural Applications”, August 1991, Brussels, 385–392 (1991).Google Scholar
17. Shen, C. and Springer, G.S., J. Composite Materials, 10, 2–20 (1976)Google Scholar
18. Nielsen, L.E. and Landel, R.F., “Mechanical Properties of Polymers and Composites”, 2-nd edition, Marcel Dekker, Inc., New York (1991), p.141.Google Scholar