Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-05T12:03:28.319Z Has data issue: false hasContentIssue false
  • English
  • Français

Diamond Growth Rates and Quality: Dependence on Gas Phase Composition

Published online by Cambridge University Press:  21 February 2011

William D. Cassidy ,
Edward A. Evans ,
Yaxin Wang ,
John C. Angus ,
Peter K. Bachmann ,
Hans-Jurgen Hagemann ,
Dieter Leers  and
Detlef U. Wiechert
William D. Cassidy
Affiliation:
Case Western Reserve University, Cleveland, OH 44106–7217, USA
Edward A. Evans
Affiliation:
Case Western Reserve University, Cleveland, OH 44106–7217, USA
Yaxin Wang
Affiliation:
Case Western Reserve University, Cleveland, OH 44106–7217, USA
John C. Angus
Affiliation:
Case Western Reserve University, Cleveland, OH 44106–7217, USA
Peter K. Bachmann
Affiliation:
Philips Research Laboratories, Aachen, D52021, Aachen, Germany
Hans-Jurgen Hagemann
Affiliation:
Philips Research Laboratories, Aachen, D52021, Aachen, Germany
Dieter Leers
Affiliation:
Philips Research Laboratories, Aachen, D52021, Aachen, Germany
Detlef U. Wiechert
Affiliation:
Philips Research Laboratories, Aachen, D52021, Aachen, Germany
Get access

Abstract

Diamond growth rates and quality were studied as a function of source gas composition and correlated with position on the ternary C-H-O diagram. The chemical potentials of carbon and oxygen change dramatically on either side of the H2-CO tie line, leading to large differences in the equilibrium distribution of species. These differences are reflected in the species flux reaching the diamond surface, and hence in the quality and growth rate of the diamond. In situ microbalance measurements in a hot-filament reactor show that the reaction rate is independent of the CO concentration, but decreases with increasing O2. Quality, as measured by Raman spectroscopy, increases as the C/C+O ratio in the source gases is reduced to approach the critical value of 0.5. The stability of the filaments to decarburizing and oxidation are correlated with the carbon and oxygen chemical potentials and hence to the position on the C-H-O diagram. A preliminary ternary diagram for the C-H-F system is presented.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 339: Symposium D – Diamond, Silicon Carbide and Nitride Wide Bandgap Semiconductors , 1994 , 285
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bachmann, P.K., Leers, D. and Lydtin, H., Diamond and Related Materials 1, 1 (1991).Google Scholar
2. Prijaya, N., Angus, J.C. and Bachmann, P.K., Diamond and Related Materials 3, 129 (1993).Google Scholar
3. Sommer, M., Mui, K. and Smith, F.W., Sol. State Comm. 69, 775 (1989).Google Scholar
4. Sommer, M. and Smith, F. W., J. Mater. Res. 5, 2433 (1990).Google Scholar
5. Lersmacher, B., Lydtin, H., Knippenberg, W.F. and Moore, A.W., Carbon 5, 207 (1967).Google Scholar
6. Anthony, T., in The Physics and Chemistry of Carbides, Nitrides and Borides, edited by Freer, R. (Kluwer Academic Publishers, Norwell, MA, USA, 1990) p. 133.Google Scholar
7. Wang, Y. and Angus, J.C., Proc. 3rd Int. Symp. on Diamond Materials, Honolulu, May, 1993; Proc. Vol. 93–17, Dismukes, J.P. and Ravi, K.V., Eds., p. 249, Electrochemical Society, Pennington, NJ, 1993.Google Scholar
8. Rye, R.R., submitted, J. Appl. Phys.Google Scholar