Hostname: page-component-848d4c4894-cjp7w Total loading time: 0 Render date: 2024-06-30T19:26:47.468Z Has data issue: false hasContentIssue false

Bottom-Gate TFTs with Channel Layer Grown by Pulsed PECVD Technique

Published online by Cambridge University Press:  21 March 2011

David J. Grant
Affiliation:
Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada
Czang-Ho Lee
Affiliation:
Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada
Arokia Nathan
Affiliation:
Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada
Ujjwal K. Das
Affiliation:
MVSystems Inc., 17301 W. Colfax Avenue Suite 305, Golden, CO 80401, U.S.A.
Arun Madan
Affiliation:
MVSystems Inc., 17301 W. Colfax Avenue Suite 305, Golden, CO 80401, U.S.A.
Get access

Abstract

In this paper, we report on nc-Si:H thin films deposited by the pulsed PECVD technique at a temperature of 150C and TFTs made using this material. RF power and silane flow rate were varied in order to study the effect of different levels of crystallinity on the film. Electrical conductivity, Hall mobility, optical transmittance, and Raman backscattering were measured on films of two different thicknesses. From the Raman data we see that the 50 nm films with hydrogen dilution are mostly amorphous, indicating the presence of a thick incubation layer. The values obtained for the conductivity, mobility, and optical gap varied depending on the processing conditions and these results are discussed. Bottom-gate TFTs were fabricated using a pulsed PECVD channel layer and a SiN gate dielectric. The TFTs' extracted parameters are msat μsat ≤ 0.38 cm2=(V s), Vt,sat ≥7:3 V, Ion/off >106, and S < 1 V/decade. The TFT performance and material properties are presented and discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. French, I. D., Deane, S. C., and Cabarrocas, P. R. i, Asia Display IDW '01, 367 (2001).Google Scholar
2. Das, U. K., Morison, S., and Madan, A., Mat. Res. Soc. Symp. Proc. 715, A26.6 (2002).Google Scholar
3. Das, U., Morrison, S., Centurioni, E., and Madan, A., IEE Proc.-Circ. Dev. Syst. 150, 282 (2003).Google Scholar
4. Comber, P. G. L., Jones, D. I., and Spear, W. E., Phil. Mag. 35, 1173 (1977).Google Scholar
5. Houben, L.et al., Phil. Mag. A 77, 1447 (1998).Google Scholar
6. Lee, C. H., Stryahilev, D., and Nathan, A., Mat. Res. Soc. Symp. Proc. A4.14 (2004), to appear.Google Scholar
7. Chen, Y. and Wagner, S., Mat. Res. Soc. Symp. Proc. 557, 665 (1999).Google Scholar
8. Wang, Y.et al., Mat. Res. Soc. Symp. Proc. 358, 769 (1995).Google Scholar
9. Torres, P.et al., Appl. Phys. Lett. 69, 1373 (1996).Google Scholar
10. Nakahigashi, T.et al., Jap. Jou. Appl. Phys. 36 (1997).Google Scholar
11. Stryahilev, D., Sazonov, A., and Nathan, A., J. Vac. Sci. Tech. A20, 1087 (2002).Google Scholar