Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-25T17:59:46.308Z Has data issue: false hasContentIssue false

Arsenic Trapping and its Effect on Enhanced Diffusion

Published online by Cambridge University Press:  10 February 2011

Richard Brindos
Affiliation:
Department of Materials Science and Engineering, Swamp Center, 525 Engineering Bldg. #33University of Florida, Gainesville, FL 32611-6130
Mark E. Law
Affiliation:
Department of Electrical and Computer Engineering, Swamp Center, 525 Engineering Bldg. #33University of Florida, Gainesville, FL 32611-6130
Kevin S. Jones
Affiliation:
Department of Materials Science and Engineering, Swamp Center, 525 Engineering Bldg. #33University of Florida, Gainesville, FL 32611-6130
Ebrahim Andideh
Affiliation:
Intel Corporation, Portland Technology Development, 5200 NE Elam Young Parkway Hillsboro, OR 97124
Get access

Abstract

CVD grown boron marker layers were used to monitor the release of silicon interstitials from an arsenic doped surface region that was subsequently implanted with silicon. These structures were annealed for various times at 750°C in a nitrogen ambient. A comparison of boron spike enhancement and defect dissolution is made. It is shown that enhancement values from the Si+ implant were reduced at short times for samples containing arsenic compared to samples implanted with Si+ alone or As alone. The TEM results showed that defect densities were dramatically reduced for the samples containing As. These results imply that the previously reported reduction in {311} formation observed in As doped wells is most likely not a Fermi level effect and is consistent with the formation of As interstitial clusters (AsIC's). The data shows that AsIC's form and control extended defect formation and slow the enhanced diffusion.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kim, Y., Massoud, H. Z., and Fair, R. B., Journal of Electronic Materials 18, 143 (1989).Google Scholar
2. Krishnamoorthy, V., Moller, K., Jones, K. S., Venables, D., Jackson, J., and Rubin, L., Journal of Applied Physics 84(11), 5997 (1998).Google Scholar
3. Rousseau, P. M., Griffin, P. B., Fang, W. T., and Plummer, J. D., Journal of Applied Physics 84(7), 3593 (1998).Google Scholar
4. Rousseau, P. M., Griffin, P. B., Kuehne, S. C., and Plummer, J. D., IEEE Transactions on Electron Devices 43, 547 (1996).Google Scholar
5. Krishnamoorthy, V., Venables, D., Moeller, K., Jones, K. S., and Jackson, J., MRS Proceedings 469, 401 (1991).Google Scholar
6. Brindos, R., Keys, P., Law, M. E., and Jones, K. S., Applied Physics Letters, to be published (1999).Google Scholar