Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-27T02:25:07.605Z Has data issue: false hasContentIssue false

Sol-Gel Derived NiFe2O4 Modified with ZrO2 for Hydrogen Generation from Solar Thermochemical Water-Splitting Reaction

Published online by Cambridge University Press:  18 April 2012

Rahul R. Bhosale
Affiliation:
Department of Chemical and Biological Engineering, South Dakota School of Mines & Technology, Rapid City, SD 57701-3901, USA.
Rajesh V. Shende
Affiliation:
Department of Chemical and Biological Engineering, South Dakota School of Mines & Technology, Rapid City, SD 57701-3901, USA.
Jan A. Puszynski
Affiliation:
Department of Chemical and Biological Engineering, South Dakota School of Mines & Technology, Rapid City, SD 57701-3901, USA.
Get access

Abstract

This investigation reports the synthesis of Ni-ferrite and ZrO2 added Ni-ferrite powdered materials for H2 generation from thermochemical water-splitting reaction. NiFe2O4 was synthesized using sol-gel technique in which salts of Ni and Fe were sonicated in ethanol until a visually clear solution was obtained. To this solution, propylene oxide was added to achieve the gel formation. As-prepared gel was dried at 100oC for 1 h and calcined upto 600oC at a ramp rate of 40oC/min. The calcined sample from the furnace was removed at 600oC and cooled down at room temperature in air. To synthesize NiFe2O4/ZrO2 powdered mixture, ZrO2 nanoparticles were mixed with the calcined ferrite powder using vortex mixer. These powdered materials were analyzed using powder x-ray diffractometer (XRD), BET surface area analyzer and scanning (SEM) and transmission electron microscopy (TEM). As-prepared NiFe2O4 and ZrO2 added NiFe2O4 powdered materials were loaded in an Inconel tubular reactor to investigate H2 generation from four consecutive thermochemical cycles where water-splitting and regeneration was performed at 900o and 1100oC, respectively.

Type
Research Article
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Agrafiotis, C., Pagkoura, C., Lorentzou, S., Kostoglou, M., and Konstandopoulos, A., Catalysis Today 127, 265 (2007).Google Scholar
2. Bhosale, R., Shende, R. and Puszynski, J., International Journal of Hydrogen Energy 37, 2924 (2011).Google Scholar
3. Roeb, M., Kluser, Sattler C., Monnerie, N., Oliveira, L., Konstandopoulos, A., Agrafiotis, C., Zaspalis, V., Nalbandian, L., Steele, A. and Stobbe, P., Journal of Solar Energy Engineering 128, 125 (2006).Google Scholar
4. Steinfeld, A., Solar Energy 78, 603 (2005).Google Scholar
5. Abanades, S. and Flamant, G., Solar Energy 80, 1611 (2006).Google Scholar
6. Fresno, F., Yoshida, T., Gokon, N., Fernandez-Saavedra, R. and Kodama, T., International Journal of Hydrogen Energy 35, 8503 (2010).Google Scholar
7. Bhosale, R., Shende, R. and Puszynski, J., Journal of Energy and Power Engineering 4, 27 (2010).Google Scholar
8. Bhosale, R., Shende, R. and Puszynski, J., International Review of Chemical Engineering 2, 852 (2010).Google Scholar
9. Yang, H., Zhang, X., Ao, W., Qiu, G., Materials Research Bulletin, 39, 833 (2004).Google Scholar
10. Shi, J.L., Deguchi, Y., Sakabe, Y., Journal of Materials Science, 40, 5711 (2005).Google Scholar
11. Kodama, T., Gokon, N., Yamamoto, R., Solar Energy 82, 73 (2008).Google Scholar
12. Gokon, N., Murayam, H., Nagasaki, A., Kodama, T., Solar Energy 83, 527 (2009).Google Scholar