Article contents
Poly-Si - A Most Important Material
Published online by Cambridge University Press: 21 February 2011
Abstract
The many advantages of polycrystalline Si (poly-Si) to semiconductor device manufacturing are reviewed, together with methods of deposition and new uses.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1990
References
1.
Kamins, T., Polycrystalline Silicon for Integrated Circuit Applications, (Kluwer Academic Publishers, Boston, 1988).Google Scholar
4.
Hammond, M.L. and Gieske, R.J., Tech. Proc. SEMICON West, (Semiconductor Equipment and Materials Institute, May 1976), also published as Tech. Note 501, Low Pressure Chemical Vapor Deposition. Impact on the Industry, (Tempress Microelectronics, June 1976).Google Scholar
5.
Hammond, M.L. in Proc. 6th Int'l. Conf. on Chemical Vapor Deposition, edited by Donaghey, L.F., (The Electrochem. Soc. 77–5
Pennington, NJ
1977) pp144–50.Google Scholar
6.
Hammond, M. L., Polycrvstalline Silicon and Refractory Silicide Films for Integrated Circuits, (University Extension and College of Engieering, University of California, Berkeley, CA
1980).Google Scholar
7.
Hammond, M. L. in Silicon Processing, edited by Gupta, D.C. (Amer. Soc. Testing Materials, 1983) p206–17.10.1520/STP36168SGoogle Scholar
8.See mutiple papers in Ragid Thermal Annealing/Chemical Vapor Deposition. and Integrated Processing, edited by Hodul, D., Gelpey, J. C., Green, M. L., Seidel, T. E. (Mater. Res. Soc. 146
Pittsburgh, PA
1989).Google Scholar
9.Gemini Products, Lam Research Corp., 49026 Milmont Dr, Fremont, CA 94538.Google Scholar
10.
Epitaxy Reactor Products, Applied Materials, Inc., 3050 Bowers Ave., Santa Clara, CA
95051.Google Scholar
11.
Galewski, C. and Oldman, W. G. in Tech. Digest 1988 IEEE Svmp.on VLSI Technology (IEEE
1988) 79.Google Scholar
12.
Gibbons, J. F., Gronet, C. M., and Williams, K. E., Appl. Phys. Lett.
41, p721, 1985, and J. F. Gibbons, U.S. Patent No. 4544 418 (1 October 1985).10.1063/1.96015Google Scholar
13.
Raicu, B.
et al. in Polysilicon Films and Interfaces edited by Wong, C.Y. (Mat. Res. Soc. Proc. 106, Pitsburgh, PA
1986) pp267–272, and R. Raicu, U.S. Patent No. 4 561 907 (31 December 1985).Google Scholar
14.
Drowley, C. I. and Hammond, M., to be published in Solid State Technology, May 1990
Google Scholar
16.
Fisher, S. M., Hammond, M. L., and Sandler, N. P., Solid State Technology, 29
107 (1986).Google Scholar
17.
Inokawa, H., Kobayashi, T., Kiuchi, K in Extended Abs., 18th Int'l. Conf. Solid State Devices and Materials, (Tokyo, Japan
1986) p73, also see p229 of ref. 1.Google Scholar
18.
Jastrzebski, L., Corboy, J. F., and Soydan, R., J Electrochem. Soc
136
3506 (1989).10.1149/1.2096495Google Scholar
19.
Drowley, C. I. and Turner, J. E. in Proc. CVD-X. 10th Int'l. Conf. On Chem, Vapor Dep. edited by Cullen, G.W. (The Electrochem. Soc. 87–8
1987) p243.Google Scholar
20.
Lu, N. C. C., IEEE Circuits and Devices Magazine, January 1989
27.10.1109/101.17236Google Scholar
24.
Shibita, H.
et al. in Tech. Digest 1987 Symp. on VLSI Technology (Japan Society of Applied Physics
1987) 75.Google Scholar
25.
Siekkinen, J. W.
Klaasen, W. A., and Neudeck, G. W., IEEE Trans. Electron Devices
35
1640 (1988).10.1109/16.7366Google Scholar
30.
Kazmerski, L. in International Materials Reviews
34
185 (1909).10.1179/imr.1989.34.1.185Google Scholar
31.
Ikeda, K.
et al. in Technical Digest of the 7th Sensor Symposium (Japan Information Center of Science and Technology, Tokyo
1988) 193.Google Scholar
- 4
- Cited by