Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-23T13:34:51.993Z Has data issue: false hasContentIssue false
  • English
  • Français

Materials Characterization of CIGS solar cells on Top of CMOS chips

Published online by Cambridge University Press:  25 July 2011

J. Lu ,
W. Liu ,
A. Y. Kovalgin ,
Y. Sun  and
J. Schmitz
J. Lu
Affiliation:
MESA+ Institute for Nanotechnology, University of Twente, Enschede, Netherlands
W. Liu
Affiliation:
Tianjin Key Laboratory, Nankai University, Tianjin, PR China
A. Y. Kovalgin
Affiliation:
MESA+ Institute for Nanotechnology, University of Twente, Enschede, Netherlands
Y. Sun
Affiliation:
Tianjin Key Laboratory, Nankai University, Tianjin, PR China
J. Schmitz*
Affiliation:
MESA+ Institute for Nanotechnology, University of Twente, Enschede, Netherlands
*
*email: [email protected]
Get access

Abstract

In the current work, we present a detailed study on the material properties of the CIGS layers, fabricated on top of the CMOS chips, and compare the results with the fabrication on standard glass substrates. Almost identical elemental composition on both glass and CMOS chips (within measurement error). From X-ray diffraction measurement, except two peaks from the Si <100> substrate, the diffraction peaks from CIGS solar cell CMOS chip and that on glass substrate coincide for all three temperatures. Helium ion microscope images of the cross-section and top view of the CIGS layers, shows that the grain size is suitable for high efficiency solar cells.

Keywords

photovoltaicchemical compositioncrystalline
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1325: Symposium E – Energy Harvesting—Recent Advances in Materials, Devices and Applications , 2011 , mrss11-1325-e06-23
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Weiser, M., “The Computer for the Twenty-First Century,” Scientific American, vol. 265, no. 3, pp. 94–104, 1991.Google Scholar
[2] Warneke, B., Last, M., Liebowitz, B., and Pister, K. S. J., “Smart dust: communicating with a cubic-millimeter computer,” Computer, vol. 34, no. 1, pp. 44–51, 2001.Google Scholar
[3] Armand, M., and Tarascon, J. M., “Building better batteries,” Nature, vol. 451, no. 7179, pp. 652–657, 2008.Google Scholar
[4] Pop, V., Bergveld, H. J., Notten, P. H. L., and Regtien, P. P. L., “State-of-the-art of battery state-of-charge determination,” Measurement Science and Technology, vol. 16, no. 12, 2005.Google Scholar
[5] Paradiso, J. A., and Starner, T., “Energy scavenging for mobile and wireless electronics,” IEEE Pervasive Computing, vol. 4, no. 1, pp. 18–27, 2005.Google Scholar
[6] Tarascon, J. M., “Key challenges in future Li-battery research,” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 368, no. 1923, pp. 3227–3241, 2010.Google Scholar
[7] Amirtharajah, R., and Chandrakasan, A. P., “Self-powered signal processing using vibration-based power generation,” IEEE Journal of Solid-State Circuits, vol. 33, no. 5, pp. 687–695, 1998.Google Scholar
[8] Hanson, S., Foo, Z., Blaauw, D., and Sylvester, D., “A 0.5 V sub-microwatt CMOS image sensor with pulse-width modulation read-out,” IEEE Journal of Solid-State Circuits, vol. 45, no. 4, pp. 759–767, 2009.Google Scholar
[9] Paglinawan, A. C., Wang, Y. H., Cheng, S. C., Chuang, C. C., and Chung, W. Y., “CMOS temperature sensor with constant power consumption multi-level comparator for implantable bio-medical devices,” Electronics Letters, vol. 45, no. 25, pp. 1291–1292, 2009.Google Scholar
[10] Lu, J., Liu, W., van der Werf, C. H. M., Kovalgin, A. Y., Sun, Y., Schropp, R. E. I., and Schmitz, J., “Above-CMOS a-Si and CIGS Solar Cells for Powering Autonomous Microsystems,” 2010 International Electron Devices Meeting, IEDM 2010.Google Scholar
[11] Green, M. A., Emery, K., Hishikawa, Y., and Warta, W., “Solar cell efficiency tables (version 37),” Progress in Photovoltaics: Research and Applications, vol. 19, no. 1, pp. 84–92, 2011.Google Scholar
[12] Guillemoles, J. F., Kronik, L., Cahen, D., Rau, U., Jasenek, A., and Schock, H. W., “Stability Issues of Cu(In, Ga)Se2-Based Solar Cells,” Journal of Physical Chemistry B, vol. 104, no. 20, pp. 4849–4862, 2000.Google Scholar
[13] Matsushima, O., Miyazaki, K., Takaoka, M., Maekawa, T., Sekiguchi, H., Fuchikami, T., Moriwake, M., Takasu, H. et al. , “A high-sensitivity broadband image sensor using CuInGaSe2 thin films.” pp. 1–4.Google Scholar
[14] Ward, B. W., Notte, J. A., and Economou, N. P., “Helium ion microscope: A new tool for nanoscale microscopy and metrology,” Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, vol. 24, no. 6, pp. 2871–2874, 2006.Google Scholar
[15] Thornton, J. A., “Influence of appratus geometry and deposition conditions on the structure and topography of thick sputtered coatings,” J Vac Sci Technol, vol. 11, no. 4, pp. 666–670, 1974.Google Scholar
[16] Bunshah, R. F., “Structure/Property relationships in evaporated thick films and bulk coatings,” J Vac Sci Technol, vol. 11, no. 4, pp. 633–638, 1974.Google Scholar
[17] Archer, M. D., and Hill, R., Clean electricity from photovoltaics, London: Imperial College Press, 2001.Google Scholar
[18] Contreras, M. A., Romero, M. J., and Noufi, R., “Characterization of Cu(In, Ga)Se2 materials used in record performance solar cells,” Thin Solid Films, vol. 511-512, pp. 51–54, 2006.Google Scholar
[19] Shafarman, W. N., and Zhu, J., “Effect of substrate temperature and deposition profile on evaporated Cu(InGa)Se2 films and devices,” Thin Solid Films, vol. 361, pp. 473–477, 2000.Google Scholar