Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-17T17:08:43.544Z Has data issue: false hasContentIssue false
  • English
  • Français

Material Properties of Sipos Films Prepared by XeCl Excimer Laser Annealing of a-Si:Nx Films

Published online by Cambridge University Press:  10 February 2011

Hong-Seok Choi ,
Jae-Hong Jun ,
Keun-Ho Jang  and
Min-Koo Han
Hong-Seok Choi
Affiliation:
Department of Electrical Engineering, Seoul National University, San 56-1, Shinrim-dong, Kwanak-ku, Seoul 151-742, Korea
Jae-Hong Jun
Affiliation:
Department of Electrical Engineering, Seoul National University, San 56-1, Shinrim-dong, Kwanak-ku, Seoul 151-742, Korea
Keun-Ho Jang
Affiliation:
Department of Electrical Engineering, Seoul National University, San 56-1, Shinrim-dong, Kwanak-ku, Seoul 151-742, Korea
Min-Koo Han
Affiliation:
Department of Electrical Engineering, Seoul National University, San 56-1, Shinrim-dong, Kwanak-ku, Seoul 151-742, Korea
Get access

Abstract

The material properties of laser-annealed a-Si:Nx films were investigated. The a-Si:Nx films for laser-annealing were deposited by rf plasma enhanced chemical vapor deposition (PECVD) with NH3 and SiH4 gas mixtures. At the 0.35 of NH3/SiH4 ratio, the optical band-gap was abruptly increased to 2.82 eV from 2.05 eV by laser-annealing which indicates that Si-N bonding comes to be notable at that ratio. The electrical conductivity showed the maximum value of 4× 10-6 S/cm at the 0.11 of NH3/SiH4 ratio where the grain growth and the increase of Si-N bonding are optimized for the enhancement of electrical conductivity. The σP/σD ratio which is related to the defects states for photo generation centers was decreased with increasing NH 3/SiH 4 ratio. Our experimental data showed that the optical band gap and electrical conductivity of laserannealed a-Si:Nx films were dominantly affected by the NH3/SiH4 ratio at the 250 mJ/cm2 of laser-annealing energy density.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 424: Symposium H – Flat Panel Display Materials II , 1996 , 119
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Miyata, Y., Furuta, M., Yoshioka, T. and Kawamura, T., Jpn. J. Appl. Phys. 31, 4559 (1992).Google Scholar
2. Kim, C. D. and Mastumura, M., IEEE Trans. Electron Devices 43, 576 (1996).Google Scholar
3. Khan, B. A. and Pandya, R., Mater. Res. Soc. Symp.Proc. 106, 353 (1988).Google Scholar
4. Fossum, J. G., Conde, A. O., Shichijo, H. and Banerjee, S. K., IEEE Trans. Electron Devices 32, 1878 (1985).Google Scholar
5. Park, C. M., Min, B. H., Jang, K. H., Jun, J. H. and Han, M. K., Extented Abstracts of Solid-State Electron Devices and Materials, 656 (1995).Google Scholar
6. Yazaki, M., Takenaka, S. and Ohshima, H., Jpn. J. Appl. Phys. 31, 206 (1992).Google Scholar
7. Thompson, M. O., Galvin, G. J. and Mayer, J. W., Phys. Rev. Lett. 52, 2360 (1984).Google Scholar