Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-29T07:39:09.811Z Has data issue: false hasContentIssue false
  • English
  • Français

Integration of Al-Fill Processes for Contacts and VIAS

Published online by Cambridge University Press:  15 February 2011

H. J. Barth
H. J. Barth*
Affiliation:
Siemens AG, Components Group, Munich, Germany
Get access

Abstract

Today different Al-fill techniques are used for the fill of submicron contacts and vias. The integration aspects of the most promising approaches, Al-reflow, cold/hot Al-planarization and high pressure Al-fill (Forcefill) are compared to the widely used W-plug technique. The filling properties are discussed with respect to future applications in ULSI devices. Special attention is given to the barrier stability in contacts and the influence on patterning. Various electrical data and reliability results are compared to metallizations with W-plugs. The implications of the Al-fill processes on chip design, especially on the size and shape of holes, the pattern density, the possibility of producing stacked contacts/vias and the metal to contact/via overlap are considered also. In an outlook for future developments, e.g. the introduction of low k dielectrics, the inverse metallization architecture with (dual) damascene interconnects and the emerging Cu metallizations, Alfill processes are facing new challenges which will be discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 427: Symposium K – Advanced Metallization for Future ULSI , 1996 , 253
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Park, C. S., Lee, S. I., Park, J. H., Sohn, J. H., Chin, D. and Lee, J. G., Proc. 8th Int.VMIC Conf. (Santa Clara,CA, 1991) p. 326 Google Scholar
[2] Park, I. S., Lee, S. I., Wee, Y. J., Jung, W. S., Choi, G. H., Park, C. S., Park, S. H., Ahn, S. T., Lee, M. Y., Kim, Y. K. and Reynolds, R., IEDM Tech. Digest (1994) p. 109 Google Scholar
[3] Park, I. S., Park, C. S., Choi, G. H., Wee, Y. J., Kim, I. C., Koh, K. M., Lee, H.-D., Chung, U. I., Lee, S. I. and Lee, M. Y., Proc. 12th Int. VMIC Conf. (Santa Clara,CA, 1995) p. 45 Google Scholar
[4] Nishimura, H., Yamada, T. and Ogawa, S., Proc. 8th Int. VMIC Conf. (Santa Clara,CA, 1991) p. 171 Google Scholar
[5] Xu, Z., Kieu, H., Raaijmakers, I. and Tepman, A., Thin Solid Films 253 (1994) 367 Google Scholar
[6] Yao, G., Chen, S., Khurana, N., Xu, Z., Taoka, M. and Aruga, M., European Semiconductor (February 1996) 15 Google Scholar
[7] Biberger, M. A., Hoffman, V., Ting, C. H., Zhao, B. and Taa, L., Semiconductor Fabtech 2 (1995) 241 Google Scholar
[8] Zhao, B., Ta, L., Ting, C. H., Biberger, M. A. and Hoffman, V., Advanced Metallization for UJLSI Applications in 1994, ed. Blumenthal, R., Janssen, G. (MRS,Pittsburgh, 1995) p. 511 Google Scholar
[9] Dixit, G. A., Chisholm, M. F., Jain, M. K., Weaver, T., Ting, L. M., Poarch, S., Mizobuchi, K., Havemann, R. H., Dobson, C. D., Jeffryes, A. I., Holverson, P. J., Rich, P., Butler, D. C. and Hems, J., IEDM Tech. Digest (1994) p. 105 Google Scholar
[10] Holverson, P. J., Dobson, C. D., Rich, P., Butler, D. C., Green, G. R., Harris, M. G. M., McGeown, A., Dixit, G. A., Poarch, S., Hamamoto, K., Bohannon, B., Hsu, W. Y. and Havemann, R. H., Proc. 12th Int. VMIC Conf. (Santa Clara,CA, 1995) p. 537 Google Scholar
[11] Shterenfeld-Lavie, Z., Rabinovich, I., Levy, J., Haim, A., Dobson, C., Buchanan, K., Rich, P. and Thomas, D. J., Proc. 12th Int. VMIC Conf. (Santa Clara,CA, 1995) p. 31 Google Scholar
[12] Barth, H. J., Frank, M., Röhl, S., Schneegans, M., Wendt, H., Dobson, C. D., Rich, P., Buchanan, K. E., Harris, M. G. M., Proc. 12th Int. VMIC Conf. (Santa Clara,CA, 1995) p. 52 Google Scholar
[13] Ohba, T., MRS Bulletin (November 1995) 46 Google Scholar
[14] Koerner, H., Koller, K., Seidel, U., Willems, B. and Kampermann, S., Proc. 'Workshop on Tungsten and other Advanced Metals for ULSI VII', (MRS, Pittsburgh, PA 1991) p. 369 Google Scholar
[15] Mitwalsky, A., Koerner, H. and Huber, V. Applied Surface Science 53 (1991) 62 Google Scholar
[16] Kaufman, F. B., Thompson, D. B., Broadie, R. E., Jaso, M. A., Guthrie, W. L., Pearson, D. J. and Small, M. B., J. Electrochem. Soc. 138 (1991) 3460 Google Scholar
[17] Rutten, M., Feeney, P., Cheek, R. and Landers, W., Semiconductor International (Sept. 1995) 123 Google Scholar
[18] Kikuta, K., Kikkawa, T. and Aoki, M., Proc. 8th Int. VMIC Conf. (Santa Clara,CA, 1991) p. 163 Google Scholar
[19] Kikuta, K., MRS Bulletin (November 1995) 53 Google Scholar
[20] Sobue, S., Mukainakano, S., Ueno, Y. and Hattori, T., Jpn. J. Appl. Phys. 34 (1995) 987 Google Scholar
[21] Nag, S., Dixit, G. A., Jain, M. K., Taylor, K. J., Krishnan, S., Ting, L. M., Luttmer, J. D., Havemann, R. H., Witty, D. R., James, L., Sahin, T. and Nowak, R., Proc. 12th Int. VMIC Conf. (Santa Clara,CA, 1995) p. 24 Google Scholar
[22] Wendt, H., Wilier, J., Emmer, D. and Kammer, H., Proc. 10th Int. VMIC Conf. (Santa Clara,CA, 1993) p. 281 Google Scholar
[23] Onoda, H., Hashimoto, K. and Touchi, K., J. Vac. Sci. Technol. B 13 (1995) 1546 Google Scholar
[24] Gn, F. H., Liu, L. J. and Guo, M., Proc. SPIE 1994; vol.2335, p. 98 Google Scholar
[25] Singer, P., Semiconductor International (November 1994) 52 Google Scholar
[26] Licata, T., Okazaki, M., Ronay, M., Landers, W., Ohiwa, T., Poetzlberger, H., Aochi, H., Dobuzinsky, D., Filippi, R., Restaino, D., Knorr, D. and Ryan, J., Proc 12th Int. VMIC Conf. (Santa Clara,CA, 1995) p. 596 Google Scholar
[27] Kücher, P., Aochi, H., Gambio, J., Licata, T., Matsuda, T., Nguyen, S., Okazaki, M., Palm, H. and Ronay, M., Applied Surface Science 91 (1995) 359 Google Scholar