Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-25T16:28:40.360Z Has data issue: false hasContentIssue false
  • English
  • Français

Contact Model for a Pad Asperity and a Wafer Surface in the Presence of Abrasive Particles for Chemical Mechanical Polishing

Published online by Cambridge University Press:  01 February 2011

Dincer Bozkaya  and
Sinan Muftu
Dincer Bozkaya
Affiliation:
[email protected], Northeastern University, Boston MA 02115, United States
Sinan Muftu
Affiliation:
[email protected], Northeastern University, Boston, MA, 02115, United States
Get access

Abstract

A contact model for a single spherical (pad) asperity and a flat (wafer) surface, with an interface filled with spherical (abrasive) particles is introduced. Finite element method is used to determine the deformation characteristics of a single spherical abrasive indenting a hyper-elastic pad material. The asperities in Greenwood and Tripp (GT) model, which is widely used for the contact of rough spheres, are replaced with the spherical particles. Relations are developed to predict pad-to-particle-to-wafer contact in two distinct regimes, where a) pad and the wafer are separated by the particle; and b) all three bodies come in contact simultaneously. The results of the model show that the abrasive particles in the (pad) asperity-wafer interface causes the contact to be distributed over an area larger than that predicted by the Hertz model, while the maximum contact pressure becomes relatively lower. The fraction of the load carried by pad-to-wafer and pad-to-abrasive-to-wafer varies along the contact interface of the pad asperity and wafer.

Keywords

CMPdielectricmachining
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 991: Symposium C – Advances and Challenges in Chemical Mechanical Planarization , 2007 , 0991-C13-02
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Zhang, F., Busnaina, A.A., and Ahmadi, G., J. Electrochem. Soc. 147, 2665–2669 (1999).Google Scholar
2. Luo, J., Dornfeld, D.A., IEEE Trans. Semiconduct. Manuf. 14, 112–133 (2001).Google Scholar
3. Qin, K., Moudgil, B., Park, C.W., Thin Solid Films, 446, 277–286 (2004).Google Scholar
4. Ahmadi, G., Xia, X., J. Electrochemical Soc. 148, 99–109 (2001).Google Scholar
5. Fu, G., Chandra, A. et al. ,, IEEE Trans. Semicon. Manuf. 14, 406–417 (2001).Google Scholar
6. Bastawros, A., Chandra, A., Guo, Y., Yan, B., J. Electron. Mater. 31, 1022–1031 (2002).Google Scholar
7. Greenwood, J.A., Tripp, J.H., ASME Journal of Applied Mechanics, 34, 153–159 (1967).Google Scholar
8. Greenwood, J.A., Williamson, J.B.P., Proc of the Royal Soc. A295, 300–319 (1966).Google Scholar
9. Kim, A.T., Seok, J., Tichy, J.A., Cale, T.S., J. Electrochem. Soc. 150, 570–576 (2003).Google Scholar