Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-25T17:32:27.314Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Failure Mechanisms and Failure Rate of Oxide Wearout by Hot Electron Using D.C. and A.C. Substrate Electron Injection

Published online by Cambridge University Press:  15 February 2011

Toshikazu Nishida ,
Scott E. Thompson  and
Jack T. Kavalieros
Toshikazu Nishida
Affiliation:
Department of Electrical Engineering and Florida Solid State Electronics Laboratory, University of Florida, Gainesville, FL 32611
Scott E. Thompson
Affiliation:
Department of Electrical Engineering and Florida Solid State Electronics Laboratory, University of Florida, Gainesville, FL 32611
Jack T. Kavalieros
Affiliation:
Department of Electrical Engineering and Florida Solid State Electronics Laboratory, University of Florida, Gainesville, FL 32611
Get access

Abstract

Determination of the failure mechanisms and failure rate of oxide wearout by hot carrier injection in submicron metal-oxide-semiconductor field-effect-transistor (MOSFET) requires special test structures to isolate the oxide field dependence of oxide trap generation and charging. A bipolar-MOS transistor (BiMOS) structure is used which d.c. injects substrate electrons into the gate oxide of a MOS transistor by forward biasing the emitter-base n+/p junction of a vertical n+/p/n-inversion-layer bipolar junction transistor. The field and temperature dependences enable a separation of thermal and tunnel electron detrapping rates at low and high oxide field from the generation rate of new oxide traps at high fields. Pulsed a.c. substrate electron injection in a n+ sourced metal-oxide-semiconductor capacitor (SMOSC) structure is used to characterize the field dependence of oxide degradation in chlorinated oxides.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 225: Symposium G – Materials Reliability Issues in Microelectronics , 1991 , 271
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Crook, D. L., 1990 International Reliability Physics Symposium, 28th Annual Proceedings (IEEE, New York, 1990), pp. 2 (1990).Google Scholar
[2] Ning, T. H., J. Appl. Phys. 49, p. 5997 (1978).Google Scholar
[3] Verwey, J. F., J. Appl. Phys. 44, p. 2681 (1973).Google Scholar
[4] Hsu, C. C. H., Nishida, T., and Sah, C. T., J. Appl. Phys. 63, p. 5882 (1988).Google Scholar
[5] Nishida, T. and Thompson, S. E., J. Appl. Phys. 69, p. 3986 (1 April 1991).Google Scholar
[6] Fischetti, M. V., Phys. Rev. B 31, p. 2099 (1985).Google Scholar
[7] Chen, A. J., Dadgar, S., Hsu, C. C.-H., Pan, S.-C., and Sah, C. T., J. Appl. Phys. 60, p. 1391 (1986).Google Scholar
[8] Thompson, S. E. and Nishida, T., Appl. Phys. Lett. 58, p. 1262 (26 March 1991).Google Scholar