Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-26T20:54:28.463Z Has data issue: false hasContentIssue false
  • English
  • Français

Advanced metrology of Laser Groove Buried Contact processing for silicon CPV

Published online by Cambridge University Press:  15 June 2012

B Maniscalco ,
P M Kaminski ,
K Bass ,
A Abbas ,
G West ,
P.N. Rowley ,
G Claudio  and
J M Walls
B Maniscalco
Affiliation:
CREST, School of Electronic, Electrical and Systems Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
P M Kaminski
Affiliation:
CREST, School of Electronic, Electrical and Systems Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
K Bass
Affiliation:
CREST, School of Electronic, Electrical and Systems Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
A Abbas
Affiliation:
Department of Materials, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
G West
Affiliation:
Department of Materials, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
P.N. Rowley
Affiliation:
CREST, School of Electronic, Electrical and Systems Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
G Claudio
Affiliation:
CREST, School of Electronic, Electrical and Systems Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
J M Walls
Affiliation:
CREST, School of Electronic, Electrical and Systems Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
Get access

Abstract

The solar cells employed in low to medium (50 to 200 suns) concentration photovoltaic (CPV) are usually mono-crystalline silicon. Laser Groove Buried Contacts (LGBC) are preferred to screen printing in these cells due to the high currents generated in the system. In this paper, we report on the use of Coherence Correlation Interferometry (CCI) to accurately measure the width and depth of the laser-ablated grooves. In addition, the technique is also used to measure the surface roughness at the bottom of the trenches, since this can determine the success of the subsequent plating process, and at the top surface to optimize the debris control and obtain clean surfaces and well-shaped groove edges. The laser ablation process was also optimized to obtain the groove aspect ratio and surface quality required. Process parameters to be controlled include laser power, pulse energy, stage speed and focal length. The CCI technique is capable of providing all the groove and surface metrology required for this process optimization.

Keywords

photovoltaiclaser ablationdevices
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1447: Symposium V – Nanostructured and Advanced Materials for Solar-Cell Manufacturing , 2012 , mrss12-1447-v10-02
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wenham, S.R. and Green, M.A., Patent 570309, March 26, 1984, Australia.Google Scholar
2. Bruton, T.M., Heasman, K.C., Nagle, J.P. and Russell, R.R., “The achievement of 20% efficiency in a CZ silicon solar cell under concentration”, Proc. 23rd IEEE Photovoltaic Specialists Conf, 1993, Louiseville.Google Scholar
3. Bankhead, A and McDonnell, I, ‘Interferometric Surface Profiling’, GB2390676, 2004.Google Scholar
4. http://www.taylor-hobson.com/ultra-precision-3d-optical-profiler.html Google Scholar
5. Eager, S., Mason, N. B., Bruton, T., Sherborne, J. and Russell, R., “Buried Contact Cell Technology – New Manufacturing Processes with Safety and Environmental Benefits”, International Solar Energy Society Conference, 2003, UK.Google Scholar
6. Dubey, A.K. and Yadava, V., “Laser beam machining: a review”, International Journal of Machine Tool and Manufacture, vol. 48 , 2008, pp. 609–628.Google Scholar
7. Abbott, M. D., Cousins, P. J., Chen, F. W. and Cotter, J. E., “Laser-induced defects in crystalline silicon solar cells”, Proc. 31st IEEE Photovolt. Spec. Conf., 2005, pp. 1241–1244, Orlando.Google Scholar
8. Maniscalco, B, Kaminski, P, Abbas, A, Mansfield, D, Yu, Y, Bass, K, Claudio, G and M Walls, J, “Metrology of Silicon photovoltaic cells using Coherence Correlation Interferometry”, Proc 37th IEEE Photovoltaic Specialists Conference, 2011, in press.Google Scholar