Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-30T10:45:53.481Z Has data issue: false hasContentIssue false
  • English
  • Français

Study and modeling of melt pool evolution in selective laser melting process of SS316L

Published online by Cambridge University Press:  06 September 2018

J. L. Tan ,
C. Tang  and
C. H. Wong Open the ORCID record for C. H. Wong [Opens in a new window]
J. L. Tan
Affiliation:
Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore SLM Solutions Singapore Pte. Ltd., 25 International Business Park, #02-15/17 German Centre, Singapore 609916, Singapore
C. Tang
Affiliation:
Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore
C. H. Wong*
Affiliation:
Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore
*
Address all correspondence to C. H. Wong at [email protected]
Get access

Abstract

In this paper, the melting of stainless steel 316L using Computational Fluid Dynamics to observe the melt pool characteristics is studied. The simulation model allows the observation of the molten pool flow during the selective laser melting process due to Marangoni's effect and recoil pressure. Furthermore, different parameters are tested to show their effects on the melt pool and track formation. Different laser powers, as well as scanning speeds, were used to study the effects they have on the melt pool characteristics. The results were used to determine the relationships between these factors and the melt pool characteristics.

Type
Research Letters
Information
MRS Communications , Volume 8 , Issue 3 , September 2018 , pp. 1178 - 1183
Check for updates
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Gan, M. X. and Wong, C. H.: Practical support structures for selective laser melting. J. Mater. Process. Technol. 238, 474–484 (2016).Google Scholar
2.Chua, C. K., Wong, C. H., and Yeong, W. Y.: Standards, Quality Control, and Measurement Sciences in 3D Printing and Additive Manufacturing (2017).Google Scholar
3.Lim, C. W. J., Le, K. Q., Lu, Q. Y., and Wong, C. H.: An overview of 3-D printing in manufacturing, aerospace, and automotive industries. IEEE Potentials 35, 18–22 (2016).Google Scholar
4.Yan, C., Hao, L., Hussein, A., Young, P., and Raymont, D.: Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting. Mater. Des. 55, 533–541 (2014).Google Scholar
5.Zhou, J., Shrotriya, P., and Soboyejo, W.: On the deformation of aluminum lattice block structures: from struts to structures. Mech. Mater. 36, 723–737 (2004).Google Scholar
6.Fatemi, S., Ashany, J., Aghchai, A., and Abolghasemi, A.: Experimental investigation of process parameters on layer thickness and density in direct metal laser sintering: a response surface methodology approach. Virtual. Phys. Prototyp. 12, 133–140 (2017).Google Scholar
7.Do, D. and Li, P.: The effect of laser energy input on the microstructure, physical and mechanical properties of Ti-6Al-4 V alloys by selective laser melting. Virtual. Phys. Prototyp. 11, 41–47 (2016).Google Scholar
8.AlMangour, B., Grzesiak, D., Borkar, T., and Yang, J.: Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting. Mater. Des. 138, 119–128 (2018).Google Scholar
9.Gan, M. X. and Wong, C. H.: Properties of selective laser melted spodumene glass-ceramic. J. Eur. Ceram. Soc. 37, 4147–4154 (2017).Google Scholar
10.Yadroitsev, I., Bertrand, P., and Smurov, I.: Parametric analysis of the selective laser melting process. Appl. Surf. Sci. 253, 8064–8069 (2007).Google Scholar
11.Khairallah, S. and Anderson, A.: Mesoscopic simulation model of selective laser melting of stainless steel powder. J. Mater. Process. Technol. 214, 2627–2636 (2014).Google Scholar
12.Kruth, J., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., and Lauwers, B.: Selective laser melting of iron-based powder. J. Mater. Process. Technol. 149, 616–622 (2004).Google Scholar
13.Matsunawa, A., Kim, J., Seto, N., Mizutani, M., and Katayama, S.: Dynamics of keyhole and molten pool in laser welding. J. Laser. Appl. 10, 247–254 (1998).Google Scholar
14.Kempen, K., Thijs, L., Van Humbeeck, J., and Kruth, J.: Mechanical properties of AlSi10Mg produced by selective laser melting. Phys. Procedia. 39, 439–446 (2012).Google Scholar
15.AlMangour, B., Grzesiak, D., Cheng, J., and Ertas, Y.: Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: Experimental and simulation methods. J. Mater. Process. Technol. 257, 288–301 (2018).Google Scholar
16.Niendorf, T., Leuders, S., Riemer, A., Richard, H., Tröster, T., and Schwarze, D.: Highly anisotropic steel processed by selective laser melting. Metall. Mater. Trans. B 44, 794–796 (2013).Google Scholar
17.CFDEM®: LIGGGHTS Open Source Discrete Element Method Particle Simulation Code | CFDEM®project. [Online]. Available: https://www.cfdem.com/liggghts-open-source-discrete-element-method-particle-simulation-code.Google Scholar
18.OpenFOAM®: The open source CFD toolbox. OpenCFD Ltd, [Online]. Available: https://www.openfoam.com/.Google Scholar
19.Qiu, C., Panwisawas, C., Ward, M., Basoalto, H., Brooks, J., and Attallah, M.: On the role of melt flow into the surface structure and porosity development during selective laser melting. Acta Mater. 96, 72–79 (2015).Google Scholar
20.Rösler, F. and Brüggemann, D.: Shell-and-tube type latent heat thermal energy storage: numerical analysis and comparison with experiments. Heat Mass Transf. 47, 1027–1033 (2011).Google Scholar
21.Panwisawas, C., Qiu, C., Anderson, M., Sovani, Y., Turner, R., Attallah, M., Brooks, J., and Basoalto, H.: Mesoscale modelling of selective laser melting: thermal fluid dynamics and microstructural evolution. Comput. Mater. Sci. 126, 479–490 (2017).Google Scholar
22.Saldi, Z.: Marangoni Driven free Surface Flows in Liquid Weld Pools. (Delft University of Technology, The Netherlands, 2012).Google Scholar
23.Brackbill, J., Kothe, D., and Zemach, C.: A continuum method for modeling surface tension. J. Comput. Phys. 100, 335–354 (1992).Google Scholar
24.DebRoy, T. and David, S. A.: Physical processes in fusion welding. Rev. Mod. Phys. 67, 85–112 (1995).Google Scholar
25.Cho, J., Farson, D., Milewski, J., and Hollis, K.: Weld pool flows during initial stages of keyhole formation in laser welding. J. Phys. D: Appl. Phys. 42, 175502 (2009).Google Scholar
26.Yap, C. Y., Chua, C. K., and Dong, Z. L.: An effective analytical model of selective laser melting. Virtual. Phys. Prototyp. 11, 21–26 (2016).Google Scholar
27.Scipioni Bertoli, U., Wolfer, A., Matthews, M., Delplanque, J., and Schoenung, J.: On the limitations of volumetric energy density as a design parameter for selective laser melting. Mater. Des. 113, 331–340 (2017).Google Scholar
28.Rombouts, M., Kruth, J., Froyen, L., and Mercelis, P.: Fundamentals of Selective Laser Melting of alloyed steel powders. CIRP Ann. 55, 187–192 (2006).Google Scholar
29.Yadroitsev, I., Yadroitsava, I., Bertrand, P., and Smurov, I.: Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks. Rapid. Prototyp. J. 18, 201–208 (2012).Google Scholar
Supplementary material: File

Tan et al. supplementary material

Tan et al. supplementary material 1

Download Tan et al. supplementary material(File)
File 42.6 KB