Belomarinaite, ideally KNaSO4, is a new sulfate mineral discovered in the Toludskoe lava field, formed during the 2012–2013 Tolbachik Fissure eruption. The mineral occurs as arborescent aggregates of tabular crystals (1 mm × 0.3 mm × 0.1 mm) comprising hematite impurities. The average size of the aggregates is 0.5–0.7 mm. The empirical formula is (K0.95Na0.92Cu0.04)Σ1.91S1.01O4. The crystal structure of belomarinaite was determined using single-crystal X-ray diffraction data; the space group is P3m1, a = 5.6072(3), c = 7.1781(4) Å, V = 195.45(2) Å3, Z = 2 and R1 = 2.6%. In the crystal structure of belomarinaite, there are six cation sites: the [4]S1 and [4]S2 sites are occupied by S, the [6]Na and [12]K sites are occupied by Na and K, respectively, giving Na0.5K0.5 apfu and the [10]M1 and [10]M2 sites are occupied by Na0.78K0.22 and K0.78Na0.22 apfu, respectively. The crystal structure is a framework of SO4 tetrahedra, Na octahedra and K, M1 and M2 polyhedra. Belomarinaite is isostructural with the synthetic compound KNaSO4. In belomarinaite, Na and K are disordered over M1 and M2 sites; in its synthetic analogue, Na and K are ordered over M1 and M2 sites, respectively. The Mohs’ hardness is 2–3. The mineral is uniaxial (+), with ω = 1.485(3) and ε = 1.488(3) (λ = 589 nm). The strongest lines of the powder X-ray diffraction pattern [d, Å (I, %) (hkl)] are: 4.022(31)(101); 3.591(26)(002); 2.884(74)(102); 2.800(100)(110); 2.391(16)(003); 2.296(8)201; 2.008(38)(022); and 1.634(10)(212). The mineral was named in honour of Russian volcanologist Marina Gennadievna Belousova (b. 1960) for her significant contributions to the monitoring of the Tolbachik Fissure eruption.

The new mineral stefanweissite, IMA2018-020, was discovered in sanidinite volcanic ejecta from the Laach Lake (Laacher See) paleovolcano, Eifel region, Rhineland-Palatinate, Germany. Associated minerals are sanidine, nosean, biotite, augite, titanite, ferriallanite-(La), magnetite, baddeleyite and a pyrochlore-group mineral. Stefanweissite is brown and reddish-brown, with adamantine lustre; the streak is light brown to yellow. It forms long-prismatic crystals up to 0.03 mm × 0.07 mm × 1.0 mm and acicular crystals up to 2 mm long and 0.02 mm thick typically combined in radiated aggregates in cavities in sanidinite. Dcalc. = 5.254 g/cm3. The mean refractive index calculated from the Gladstone–Dale equation is 2.260. The Raman spectrum shows the absence of hydrogen-bearing groups. The chemical composition is (electron microprobe, wt.%): CaO 7.63, MnO 2.51, FeO 7.86, Al2O3 0.25, La2O3 2.28, Ce2O3 6.54, Pr2O3 1.01, Nd2O3 1.59, ThO2 3.71, UO2 1.09, TiO2 17.32, ZrO2 28.03, HfO2 0.91, Nb2O5 19.96, total 99.69. The empirical formula based on 14 O atoms per formula unit is Ca1.13(Ce0.33La0.12Nd0.08Pr0.05)Σ0.58Th0.12U0.03Mn0.29Fe0.91Al0.04Zr1.89Hf0.04Ti1.80Nb1.19O14. The simplified formula is (Ca,REE)2Zr2(Nb,Ti)(Ti,Nb)2Fe2+O14. Stefanweissite is orthorhombic, with space group Cmca. The unit-cell parameters are: a = 7.2896(4) Å, b = 14.1435(5) Å, c = 10.1713(4) Å and V = 1048.68(7) Å3. The crystal structure was solved using single-crystal X-ray diffraction data. Stefanweissite is an analogue of zirconolite-3O with Nb dominant over Ti in one of two octahedral sites. The strongest lines of the powder X-ray diffraction pattern [d, Å (I, %) (hkl)] are: 2.983(100)(202), 2.897(71)(042), 1.828(38)(154, 400, 333), 1.793(25)(244), 1.767(16)(080), 1.517(10)(282), 1.187(19)(483, 1.11.3, 602). Type material is deposited in the collections of the Fersman Mineralogical Museum of the Russian Academy of Sciences, Moscow, Russia, with the registration number 5191/1.

The Zhenzhu Spring, located in the Tengchong volcanic field, Yunnan, China, is an acid hot spring with high SO42− concentrations and intense acid aerosol generation. In order to understand the formation mechanism of sulfate minerals at the Zhenzhu Spring and provide a better insight into the sulfur isotope geochemistry of the associated Rehai hydrothermal system, we investigated the spring water hydrochemistry, mineralogy and major-element geochemistry of sulfate minerals at the Zhenzhu Spring together with the sulfur-oxygen isotope geochemistry of sulfur-containing materials at the Rehai geothermal field and compared the isotope results with those in other steam-heated environments. Subaerial minerals include a wide variety of sulfate minerals (gypsum, alunogen, pickeringite, tamarugite, magnesiovoltaite and a minor Mg–S–O phase) and amorphous SiO2. The δ34S values of the subaerial sulfate minerals at the Zhenzhu Spring varied subtly from –0.33 to 1.88‰ and were almost consistent with the δ34S values of local H2S (–2.6 to 0.6‰) and dissolved SO42− (–0.2 to 5.8‰), while the δ18O values (–8.94 to 20.1‰) were between that of the spring waters (–10.19 to –6.7‰) and atmospheric O2 (~23.88‰). The results suggest that most of the sulfate minerals are derived from the oxidation of H2S, similar to many sulfate minerals from modern steam-heated environments. However, the rapid environmental change (different ratio of atmospheric and water oxygen) at the Zhenzhu Spring accounts for the large variation of δ18O. The formation of subaerial sulfate minerals around the Zhenzhu Spring is related to acid aerosols (vapour and acid water droplets). The intense activity of spring water around vents supply the aerosol with H2SO4 (H2S oxidation and acid water droplets formed by bubble bursting) and few cations. Deposition of the acid sulfate aerosol forms the acid condensate, which attacks the underlying rocks and releases many cations and anions to form subaerial sulfate minerals at the Zhenzhu Spring.

Frenchvale quarry, once mined for dolomitic marble, contains pink corundum-bearing, quartz-free/-poor, feldspathic gneiss that is unusually sodic (~7% wt.% Na2O) and iron-poor (~0.6 wt.% Fe2O3), but has silica, alumina and immobile trace-element contents resembling those of suspended fluvial particulate matter (e.g. in the Congo River). The protolith of the gneiss, interpreted as a fine-grained clastic sediment deposited offshore, evidently was albitised prior to deformation and regional metamorphism. Variably-altered gneiss samples show a narrow range of δ18OVSMOW values (8.1 to 10.7‰) and no systematic differences in bulk O isotope composition as a function of alteration intensity. With the exception of an extensively fuchsitised zone adjacent to a thick (1.2 m), cross-cutting quartz vein that contains H2O–NaCl+CO2+CH4-bearing fluid inclusions, the O isotope data do not support interaction of the gneiss with an externally-derived fluid phase except at low fluid:rock ratio, even where granodiorite occurs in direct contact with the gneiss. Fluid inclusions in the quartz vein have bulk $X_{{\rm H}_2{\rm O}}$, $X_{{\rm C}{\rm O}_{\rm 2}}$ and $X_{{\rm C}{\rm H}_{\rm 4}}$ values (in mol.%) of 99.60, 0.14 and 0.26, respectively, as determined by gas chromatography. Although the protolith of the gneiss was associated with carbonate platformal rocks (now marble), corundum is confined to the feldspathic rocks. These feldspathic rocks lack calc-silicate minerals; they are not skarns. As such, they are distinct from well-known Himalayan sapphire and ruby deposits cited previously as analogues of the Frenchvale corundum occurrence.

Voudourisite, Cd(SO4)·H2O, and lazaridisite, Cd3(SO4)3·8H2O, are two new minerals from the Esperanza Mine, Kaminiza Area, Lavrion Mining District, Greece. This small ancient mine is also the type locality of niedermayrite and katerinopoulosite. Further associated minerals are sphalerite, galena, edwardsite, chalcanthite, gypsum and greenockite. Both secondary minerals form tiny clusters or crusts and are among the latest to form in this paragenetic sequence. They are colourless or white, transparent to translucent, with a white streak and vitreous lustre. No fluorescence is observed. The minerals exhibit conchoidal fracture, no cleavage or preferred parting. The Mohs hardness is ~3 and both have brittle tenacity. Voudourisite is biaxial (–) with refractive indices at 589(1) nm of α = 1.580(2), β = 1.624(2), γ = 1.640(2), 2Vmeas. = 70(5)°, 2Vcalc. = 61° and β ~ || [010]. Lazaridisite is biaxial neutral with refractive indices at 589(1) nm of α = 1.552(2), β = 1.561(2), γ = 1.570(2), 2Vmeas. = 90(5)° and 2Vcalc. = 90°. The chemical compositions of voudourisite and lazaridisite are close to ideal with only minor amounts of copper detectable. The atomic arrangement in voudourisite (space group P21/c with a = 7.633(2), b = 7.458(2), c = 8.151(2) Å, β = 122.35(1)° and V = 392.0(2) Å3) is related to that of kieserite while lazaridisite (space group C2/c with a = 14.813(3), b = 11.902(2), c = 9.466(2) Å, β = 97.38(1)° and V = 1655.2(6) Å3) is a distinct structure-type. Calculated densities are 3.838 and 3.088 g/cm3, respectively.

The strongest lines in the powder X-ray pattern [d in Å (I) (hkl)] are: 4.890 (66) (110); 3.741 (25) (020); 3.578 (100) (11$\bar 2$); 3.230 (43) (200); 2.525 (33) (022); 2.395 (29) (112) for voudourisite and 6.860 (100) (200); 6.317 (72) (111); 5.965 (84) (020); 4.512 (58) (310); 3.727 (78) (202); 3.608(82)(13$\bar 1$); 3.109 (83) (40$\bar 2$); 3.020 (50) (33$\bar 1$) for lazaridisite, respectively.

The structure hierarchy hypothesis states that structures may be ordered hierarchically according to the polymerisation of coordination polyhedra of higher bond-valence. A hierarchical structural classification is developed for sheet-silicate minerals based on the connectedness of the two-dimensional polymerisations of (TO4) tetrahedra, where T = Si4+ plus As5+, Al3+, Fe3+, B3+, Be2+, Zn2+ and Mg2+. Two-dimensional nets and oikodoméic operations are used to generate the silicate (sensu lato) structural units of single-layer, double-layer and higher-layer sheet-silicate minerals, and the interstitial complexes (cation identity, coordination number and ligancy, and the types and amounts of interstitial (H2O) groups) are recorded. Key aspects of the silicate structural unit include: (1) the type of plane net on which the sheet (or parent sheet) is based; (2) the u (up) and d (down) directions of the constituent tetrahedra relative to the plane of the sheet; (3) the planar or folded nature of the sheet; (4) the layer multiplicity of the sheet (single, double or higher); and (5) the details of the oikodoméic operations for multiple-layer sheets. Simple 3-connected plane nets (such as 63, 4.82 and 4.6.12) have the stoichiometry (T2O5)n (Si:O = 1:2.5) and are the basis of most of the common rock-forming sheet-silicate minerals as well as many less-common species. Oikodoméic operations, e.g. insertion of 2- or 4-connected vertices into 3-connected plane nets, formation of double-layer sheet-structures by (topological) reflection or rotation operations, affect the connectedness of the resulting sheets and lead to both positive and negative deviations from Si:O = 1:2.5 stoichiometry. Following description of the structural units in all sheet-silicate minerals, the minerals are arranged into decreasing Si:O ratio from 3.0 to 2.0, an arrangement that reflects their increasing structural connectivity. Considering the silicate component of minerals, the range of composition of the sheet silicates completely overlaps the compositional ranges of framework silicates and most of the chain-ribbon-tube silicates.

An unusual occurrence of asbestiform sepiolite, filling veins in the antigorite serpentinites of the Voltri Unit exposed in a borrow pit (now reclaimed) in the Deiva forest, near Sassello, NW Italy, was investigated with an in-depth analytical approach aimed at studying its crystal-chemistry and structure and evaluating its possible hazards for human health. Optical microscopy and scanning electron microscopy (energy-dispersive spectroscopy mode) proved that these sepiolite fibres, apparently up to several cm long, are made up of bundles of thinner fibrils (or laths: average length > 100 µm; thickness ≈ 80 nm), with a composition consistent to that reported in the literature. The dehydration process was monitored through thermo-gravimetric analyses and Fourier-transform infrared spectroscopy, performed at increasing T; the latter, in particular, showed the presence of moderate amounts of aliphatic hydrocarbons – not yet identified thoroughly – associated with the sample. The crystal structure refinement with the Rietveld method showed no relevant difference from the literature models, although a peculiar distribution of zeolitic H2O molecules was observed. The geological context suggests that the Sassello sepiolite precipitated from hydrothermal fluids, which were saturated in Mg and silica by the interaction of the host serpentinites. The same setting favoured formation of abiotic hydrocarbons, by means of the Fischer–Tropsch reaction. The extremely long and flexible fibrils (length/width aspect ratio >> 3) of this sepiolite specimen could represent a serious hazard for human health if air dispersed and inhaled; also, its atypical association with hydrocarbons (only reported once previously) might even favour further fragmentation in thinner units.

During a study of the ore minerals belonging to the recently discovered Shuangjianzishan Ag–Pb–Zn deposit in NE China, we have discovered exceptional selenium enrichment in canfieldite (up to 11.6 wt.% of Se). Incorporation of Se into canfieldite has been investigated by an integrated approach using field emission scanning electron microscopy, electron microprobe and single-crystal X-ray diffraction. Canfieldite has been identified as one of the dominant Ag-bearing ore minerals in the studied deposit, which occurs mostly in slate-hosted vein type Ag–Pb–Zn ore bodies. Selenium is either homogeneously or, remarkably, heterogeneously distributed in the different canfieldite fragments studied. Chemical variations of Se are mostly attributable to a series of retrograde reactions resulting in diverse decomposition and exsolution of primary phases during cooling, or alternatively, related to influxes of Se-rich fluids during the formation of canfieldite. To evaluate the effects of the Se-for-S substitution in the structure, a crystal of Se-rich canfieldite [Ag7.98Sn1.02(S4.19Se1.81)Σ6.00] was investigated. The unit-cell parameters are: a = 10.8145(8) Å and V = 1264.8(3) Å3. The structure was refined in the space group F$\bar{4}$3m to R1 = 0.0315 for 194 independent reflections, with 20 parameters. The crystal structure of Se-rich canfieldite was found to be topologically identical to that of pure canfieldite. If the short Ag–Ag contacts are ignored (due to the disorder), the two Ag atoms in the structure can be considered as three-fold (Ag1) and four-fold (Ag2) coordinated. Tin adopts a regular tetrahedral coordination. As in the case of Te-rich canfieldite, the refinement of the site-occupancy factor indicates that Se is disordered over the three anion positions.

Mitrofanovite, Pt3Te4, is a new telluride discovered in low-sulfide disseminated ore in the East Chuarvy deposit, Fedorovo–Pana intrusion, Kola Peninsula, Russia. It forms anhedral grains (up to ~20 μm × 50 μm) commonly in intergrowths with moncheite in aggregates with lukkulaisvaaraite, kotulskite, vysotskite, braggite, keithconnite, rustenburgite and Pt–Fe alloys hosted by a chalcopyrite–pentlandite–pyrrhotite matrix. Associated silicates are: orthopyroxene, augite, olivine, amphiboles and plagioclase. Mitrofanovite is brittle; it has a metallic lustre and a grey streak. Mitrofanovite has a good cleavage, along {001}. In plane-polarised light, mitrofanovite is bright white with medium to strong bireflectance, slight pleochroism, and strong anisotropy on non-basal sections with greyish brown rotation tints; it exhibits no internal reflections. Reflectance values for the synthetic analogue of mitrofanovite in air (Ro, Re’ in %) are: 58.4, 54.6 at 470 nm; 62.7, 58.0 at 546 nm; 63.4, 59.1 at 589 nm; and 63.6, 59.5 at 650 nm. Fifteen electron-microprobe analyses of mitrofanovite gave an average composition: Pt 52.08, Pd 0.19, Te 47.08 and Bi 0.91, total 100.27 wt.%, corresponding to the formula (Pt2.91Pd0.02)Σ2.93(Te4.02Bi0.05)Σ4.07 based on 7 atoms; the average of eleven analyses on synthetic analogue is: Pt 52.57 and Te 47.45, total 100.02 wt.%, corresponding to Pt2.94Te4.06. The density, calculated on the basis of the formula, is 11.18 g/cm3. The mineral is trigonal, space group R$\overline 3 $m, with a = 3.9874(1), c = 35.361(1) Å, V = 486.91(2) Å3 and Z = 3. The crystal structure was solved and refined from the powder X-ray-diffraction data of synthetic Pt3Te4. Mitrofanovite is structurally and chemically related to moncheite (PtTe2). The strongest lines in the powder X-ray diffraction pattern of synthetic mitrofanovite [d in Å (I) (hkl)] are: 11.790(23)(003), 5.891(100)(006), 2.851(26)(107), 2.137(16)(1013), 2.039(18)(0114), 1.574(24)(0120), 1.3098(21)(0027). The structural identity of natural mitrofanovite with synthetic Pt3Te4 was confirmed by electron backscatter diffraction measurements on the natural sample. The mineral name is chosen to honour Felix P. Mitrofanov, a Russian geologist who was among the first to discover platinum-group element mineralisation in the Fedorova–Pana complex.