The new mineral fluorapophyllite-(NH4), ideally NH4Ca4(Si8O20)F⋅8H2O, was found at the Vechec andesite quarry located near Vechec village, Vranov nad Topľou Co., Prešov Region, Slovak Republic. It occurs in cavities of quartz–illite–saponite–tobelite xenolith embedded in pyroxene andesite. Fluorapophyllite-(NH4) is associated with calcite, tridymite, pyrite, chabazite-Ca and heulandite-Ca. It forms clusters, aggregates or crystalline crusts consisting of individual, well-developed crystals up to 4 mm in size, exhibiting the forms {110}, {101} and {001}. The mineral is colourless to light pink and translucent with white streak and vitreous to pearly lustre; it is non-fluorescent under ultraviolet radiation. The Mohs hardness is ~4½ to 5, tenacity is brittle, fracture is irregular, and there is perfect cleavage on {001}. The calculated density is 2.325 g cm–3. Fluorapophyllite-(NH4) is optically uniaxial (+) with ω = 1.5414(5) and ɛ = 1.5393(8) (λ = 589 nm). It is non-pleochroic. The empirical formula (based on 29 O + F apfu) is [(NH4)0.55K0.32Na0.07Ca0.06]Σ1.00(Ca4.01Mg0.02)Σ4.03Si7.97O20[F0.84(OH)0.16]Σ1.00⋅8H2O. Fluorapophyllite-(NH4) is tetragonal, space group P4/mnc, a = 8.99336(9) Å, c = 15.7910(3) Å, V = 1277.18(3) Å3 and Z = 2. The seven strongest X-ray powder diffraction lines are [dobs in Å,(I,%)(hkl)]: 7.897(32)(002), 7.812(13)(101), 4.547(14)(103), 3.946(100)(004), 2.985(39)(105), 2.4841(11)(215) and 1.5788(12)(00.10). The crystal structure of fluorapophyllite-(NH4), refined to R1 = 0.0299 for 743 unique (I > 3σI) observed reflections, confirmed that the atomic arrangement is very similar to that of the other members of the apophyllite group. The new mineral is named according to the current nomenclature scheme for apophyllite-group minerals and is an NH4 dominant analogue of fluorapophyllite-(K), fluorapophyllite-(Na) and fluorapophyllite-(Cs).

The new alluaudite-group mineral badalovite was found in the Arsenatnaya fumarole at the Second scoria cone of the Northern Breakthrough of the Great Tolbachik Fissure Eruption, Tolbachik volcano, Kamchatka, Russia. It is associated with hematite, tenorite, cassiterite, johillerite, nickenichite, calciojohillerite, bradaczekite, metathénardite, aphthitalite, langbeinite, calciolangbeinite, sanidine, fluorophlogopite, fluoborite, tilasite, anhydrite, pseudobrookite, sylvite, halite, lammerite, urusovite, ericlaxmanite, arsmirandite, svabite, krasheninnikovite, euchlorine, wulffite and alumoklyuchevskite. Badalovite forms oblique-angled prismatic crystals up to 1 mm × 1 mm × 5 mm, typically combined in groups or crusts up to several hundred cm2 in area. The mineral is transparent, green, grey, yellow or colourless, with vitreous lustre. It is brittle, the Mohs hardness is 3½. Cleavage was not observed, the fracture is uneven. Dcalc is 4.02 g cm–3. Badalovite is optically biaxial (–), α = 1.753(3), β = 1.757(3), γ = 1.758(3) and 2Vmeas. = 50(10)°. Chemical composition (wt.%, electron-microprobe; holotype) is: Na2O 9.23, K2O 0.19, CaO 2.04, MgO 13.78, MnO 0.31, CuO 0.12, ZnO 0.24, Al2O3 0.06, Fe2O3 12.77, TiO2 0.01, SiO2 0.06, P2O5 0.33, V2O5 0.05, As2O5 61.51, SO3 0.02, total 100.72. The empirical formula based on 12 O apfu is Na1.67Ca0.20K0.02Mg1.92Zn0.02Mn0.02Cu0.01Fe3+0.90Al0.01(As3.01P0.03Si0.01)Σ3.05O12. The simplified formula is Na2Mg2Fe3+(AsO4)3. Badalovite is monoclinic, C2/c, a = 11.9034(3), b = 12.7832(2), c = 6.66340(16) Å, β = 112.523(3)°, V = 936.59(4) Å3 and Z = 4. The strongest reflections of the powder XRD pattern [d,Å(I)(hkl)] are: 6.41(38)(020), 5.505(20)(200), 3.577(23)($\bar{1}$31), 3.523(25)(310), 3.211(46)($\bar{1}$12), 2.911(28)($\bar{2}$22, $\bar{3}$12), 2.765(100)(240, 400) and 2.618(26)($\bar{1}$32). The crystal structure was solved from single-crystal XRD data with an R1 of = 2.49%. Badalovite is isostructural with other alluaudite-group minerals. Its simplified crystal chemical formula is A(1)NaA(1)’□A(2) □A(2)’NaM(1)MgM(2)(Mg0.5Fe3+0.5)2(AsO4)3 (□ – vacancy) and the end-member formula is NaNaMg(MgFe3+)(AsO4)3. The mineral is named in honour of the outstanding mineralogist and geochemist Stepan Tigranovich Badalov (1919–2014).

The paper opens a series devoted to the mineral diversity of the Mochalin Log rare earth element (REE) deposit, South Urals, Russia. There is a brief outline of the history of studies and geology of the deposit as well as the description of two new isostructural gatelite-group minerals, ferriperbøeite-(La) (CaLa3)(Fe3+Al2Fe2+)[Si2O7][SiO4]3O(OH)2 and perbøeite-(La) (CaLa3)(Al3Fe2+)[Si2O7][SiO4]3O(OH)2. Both minerals occur in polymineralic nodules and are associated with one another and allanite-(Ce), allanite-(La), bastnäsite-(Ce), bastnäsite-(La), ferriallanite-(Ce), ferriallanite-(La), ferriperbøeite-(Ce), perbøeite-(Ce), törnebohmite-(Ce) and törnebohmite-(La). The new minerals form isolated anhedral grains up to 0.3 mm [ferriperbøeite-(La)] and 0.5 mm [perbøeite-(La)] across and granular aggregates up to 1.5 mm × 0.5 mm [ferriperbøeite-(La)] and 3 mm × 1 mm [perbøeite-(La)]. Both minerals are brownish-black with vitreous lustre. Dcalc = 4.510 [ferriperbøeite-(La)] and 4.483 [perbøeite-(La)] g cm–3. They are optically biaxial (+); ferriperbøeite-(La): α = 1.788(5), β = 1.790(5), γ = 1.810(5) and 2Vmeas = 40(10)°; perbøeite-(La): α = 1.778(8), β = 1.783(8), γ = 1.805(8) and 2Vmeas = 40(10)°. Chemical data [wt.%, electron-microprobe; Fe3+:Fe2+ ratio from charge-balance requirements, H2O by stoichiometry; ferriperbøeite-(La)/perbøeite-(La)] are: CaO 4.91/4.81, ThO2 0.00/0.32, La2O3 23.75/22.16, Ce2O3 19.69/20.05, Pr2O3 0.85/1.09, Nd2O3 1.48/2.18, MgO 1.47/1.38, Al2O3 10.68/11.25, MnO 1.07/0.92, FeO 3.04/3.35, Fe2O3 5.31/3.78, TiO2 0.19/0.19, SiO2 27.47/27.35, F 0.11/0.23, H2O 1.61/1.54, –O = F –0.05/–0.10, total 101.58/100.50. The empirical formulae based on O20(OH,F)2 are for ferriperbøeite-(La): (Ca0.95La1.58Ce1.30Nd0.10Pr0.06)Σ3.99(Al2.27Fe3+0.72Fe2+0.46Mg0.40Mn0.16Ti0.03)Σ4.04Si4.96O20[(OH)1.94F0.06]; and for perbøeite-(La): (Ca0.94Th0.01La1.49Ce1.34Nd0.14Pr0.07)Σ3.99(Al2.42Fe3+0.52Fe2+0.51Mg0.38Mn0.14 Ti0.03)Σ4.00Si4.99O20[(OH)1.87F0.13]. Both minerals are monoclinic, P21/m; the unit-cell parameters [ferriperbøeite-(La)/perbøeite-(La)] are: a = 8.9458(2)/8.9652(4), b = 5.72971(13)/5.7306(2), c = 17.6192(3)/17.6770(9) Å, β = 115.9497(19)/116.053(6)°, V = 812.06(3)/815.88(6) Å3 and Z = 2/2. The crystal structures are solved on a single crystal and converged to R = 0.0355 [ferriperbøeite-(La)] and 0.0750 [perbøeite-(La)]. Ferriperbøeite-(La) and perbøeite-(La) are named as the La-analogues of ferriperbøeite-(Ce) and perbøeite-(Ce), respectively.

Jahnsite-(CaMnZn), CaMn2+Zn2Fe3+2(PO4)4(OH)2⋅8H2O, is a new jahnsite-group mineral associated with alteration of phosphophyllite at the Hagendorf-Süd pegmatite, Bavaria. It forms as thin yellow crusts and brown epitactic growths on altered phosphophyllite, both of which comprise lath-like crystals in orthogonal orientation, up to 100 μm long. The crystals contain intergrowths of jahnsite-(CaMnZn) and jahnsite-(CaMnMn) on a scale of ~50 μm. The calculated density is 2.87 g cm−3 based on the empirical formula. Optically it is biaxial (–), with α = 1.675(2), β = 1.686(2) and γ = 1.691(2) (white light). The calculated 2V is 68°. Dispersion could not be observed, and the optical orientation is Z = b. Pleochroism was imperceptible. Electron microprobe analyses together with results from Mössbauer spectroscopy gives the formula (Ca0.59Mn0.24)Σ0.83Mn(Zn0.74Mn2+0.48Mg0.18Fe2+0.13Fe3+0.47)Σ2Fe3+2(P0.995O4)4(OH)2.03(H2O)7.97.

Jahnsite-(CaMnZn) is monoclinic, P2/a, with a = 15.059(1), b = 7.1885(6), c = 10.031(2) Å, β = 111.239(8)° and V = 1012.1(2) Å3. The recent International Mineralogical Association approved nomenclature system for jahnsite-group minerals was applied to establish jahnsite-(CaMnZn) from the empirical formula. The structural flexibility of jahnsite-group minerals to accommodate cations of quite different sizes in the X and M1 sites is discussed in terms of rotations about the 7 Å axis of two independent octahedra centred at the M3 sites.

The crystal structure of pyrostilpnite from the Plaka mine, Lavrion Mining District, Greece, was refined in the space group P21/c to a final R1 index of 0.0283 on the basis of 2047 reflections with Fo > 4σ(Fo) and 65 refined parameters. Unit-cell parameters of the crystal examined are a = 6.8629(6), b = 15.8800(14), c = 6.2711(5) Å, β = 117.087(2)°, V = 608.48(9) Å3 and Z = 4. Chemical data agree with the stoichiometric formula Ag3SbS3. The crystal structure reported previously was confirmed, although a higher precision of refinement was achieved. It can be described as formed by {010} slabs running along c and connected along a through relatively longer Ag–S bonds. The analysis of the atomic displacement parameters together with a refinement with higher order tensors in the expression of the structure factors revealed no hint for pyrostilpnite as an ionic conductor. A historical background of the ‘ruby silvers’ is also reported.

Tetrahedrite-(Hg), Cu6(Cu4Hg2)Sb4S13, has been approved as a new mineral species using samples from Buca della Vena mine (hereafter BdV), Italy, Jedová hora (Jh), Czech Republic and Rožňava (R), Slovakia. It occurs as anhedral grains or as tetrahedral crystals, black in colour, with metallic lustre. At BdV it is associated with cinnabar and chalcostibite in dolomite veins. At Jh, tetrahedrite-(Hg) is associated with baryte and chalcopyrite in quartz–siderite–dolomite veins; at R it is associated with quartz in siderite–quartz veins. Tetrahedrite-(Hg) is isotropic, greyish-white in colour, with creamy tints. Minimum and maximum reflectance data for Commission on Ore Mineralogy wavelengths in air (BdV sample), R in %) are 32.5 at 420 nm; 32.9 at 546 nm; 33.2 at 589 nm; and 30.9 at 650 nm. Chemical formulae of the samples studied, recalculated on the basis of 4 (As + Sb + Bi) atoms per formula unit, are: (Cu9.44Ag0.07)Σ9.51(Hg1.64Zn0.36Fe0.06)Σ2.06Sb4(S12.69Se0.01)Σ12.70 (BdV), Cu9.69(Hg1.75Fe0.25Zn0.06)Σ2.06(Sb3.94As0.06)S12.87 (Jh) and (Cu9.76Ag0.04) Σ9.80(Hg1.83Fe0.15Zn0.10)Σ2.08(Sb3.17As0.58Bi0.25)S13.01 (R). Tetrahedrite-(Hg) is cubic, I$\overline 4 $3m, with a = 10.5057(8) Å, V = 1159.5(3) Å3 and Z = 2 (BdV). Unit-cell parameters for the other two samples are a = 10.4939(1) Å and V = 1155.61(5) Å3 (Jh) and a = 10.4725(1) Å and V = 1148.55(6) Å3 (R). The crystal structure of tetrahedrite-(Hg) has been refined by single-crystal X-ray diffraction data to a final R1 = 0.019 on the basis of 335 reflections with Fo > 4σ(Fo) and 20 refined parameters. Tetrahedrite-(Hg) is isotypic with other members of the tetrahedrite group. Mercury is hosted at the tetrahedrally coordinated M(1) site, along with minor Zn and Fe. The occurrence of Hg at this position agrees both with the relatively large M(1)–S(1) bond distance (2.393 Å) and the refined site scattering. Previous occurrences of Hg-rich tetrahedrite and tetrahedrite-(Hg) are reviewed, and its relations with other Hg sulfosalts are discussed.

A new mineral glikinite, ideally Zn3O(SO4)2, was found in high-temperature exhalative mineral assemblages in the Arsenatnaya fumarole, Second scoria cone of the Great Tolbachik Fissure Eruption (1975–1976), Tolbachik volcano, Kamchatka Peninsula, Russia. Glikinite is associated closely with langbeinite, lammerite-β, bradaczekite, euchlorine, anhydrite, chalcocyanite and tenorite. It is monoclinic, P21/m, a = 7.298(18), b = 6.588(11), c = 7.840(12) Å, β = 117.15(3)°, V = 335.4(11) Å3 and R1 = 0.046. The eight strongest lines of the powder X-ray diffraction pattern [d in Å (I) (hkl)] are: 6.969(56)(00$\bar{1}$), 3.942(52)(101), 3.483(100)(00$\bar{2}$), 3.294(49)(020), 2.936(43)(120), 2.534(63)(201), 2.501(63)(20$\bar{3}$) and 2.395(86)(02$\bar{2}$). The chemical composition determined by electron-microprobe analysis is (wt.%): ZnO 42.47, CuO 19.50, SO3 39.96, total 101.93. The empirical formula calculated on the basis of O = 9 apfu is Zn2.07Cu0.97S1.98O9 and the simplified formula is Zn3O(SO4)2. Glikinite is a Zn,Cu analogue of synthetic Zn3O(SO4)2. The crystal structure of glikinite is based on OZn4 tetrahedra sharing common corners, thus forming [Zn3O]4+ chains. Sulfate groups interconnect [Zn3O]4+ chains into a 3D framework.

Bowlesite is a new mineral discovered in the Merensky Reef of the Rustenburg Platinum Mine, Bushveld complex, South Africa. Bowlesite forms tiny grains (maximum dimension 20 μm). It is associated with sulfides including chalcopyrite, pyrrhotite and pentlandite, in contact with silicates including plagioclase, pyroxene- and minor serpentine-subgroup and amphibole-supergroup minerals. Bowlesite is brittle and has a metallic lustre. In plane-polarised light, bowlesite has a light bluish grey colour. It shows weak bireflectance, no pleochroism and has weak anisotropism. Internal reflections were not observed. Reflectance values of bowlesite in air (R1, R2 in %) are: 50.3–51.4 at 470 nm, 48.5–48.9 at 546 nm, 47.9–48.6 at 589 nm and 47.8–48.7 at 650 nm. Ten spot analyses of bowlesite give the average composition: Pt 56.85, Pd 0.02, Sn 34.03 and S 9.15, total 100.05 wt.%, corresponding to the empirical formula (Pt1.001Pd0.001)Σ1.002Sn0.997S1.001, based on 3 atoms per formula unit. The simplified formula is PtSnS. Due to the small size of bowlesite, the crystal structure was solved and refined from the powder X-ray-diffraction data of synthetic PtSnS. The calculated density is 10.06 g⋅cm–3. The mineral is orthorhombic, space group: Pca21 (#29) with a = 6.11511(10), b = 6.12383(10), c = 6.09667(11) Å, V = 228.31(1) Å3 and Z = 4. Bowlesite is isotypic with cobaltite, CoAsS. The origin of bowlesite is probably related to low-T exsolution of Pt–Sn phases from high-T sulfides crystallised from the sulfide melt. The mineral honours Dr. John Bowles (Manchester University, UK) for his contributions to ore mineralogy and mineral deposits related to mafic–ultramafic rocks.

Hagstromite, Pb8Cu2+(Te6+O6)2(CO3)Cl4, (IMA2019-093) is a new tellurate mineral from Otto Mountain near Baker, California, USA. It occurs on quartz in association with cerussite, fuettererite and thorneite. It is a secondary oxidation zone mineral and is presumed to have formed by oxidation of earlier formed tellurides, chalcopyrite and galena. Hagstromite occurs as light yellow–green blades, up to ~100 μm long. Crystals are transparent with adamantine to silky lustre. The mineral is brittle with two cleavages providing splintery fracture; the Mohs hardness is probably between 2 and 3. The calculated density is 7.062 g cm–3. Hagstromite is optically biaxial (+), with calculated indices of refraction for α = 2.045, β = 2.066 and γ = 2.102; 2Vmeas = 76(1)°; and optical orientation X = b, Y = a and Z = c. The Raman spectrum of hagstromite exhibits similarities with those of agaite and thorneite and confirms the presence of CO32–. The electron microprobe analyses provided the empirical formula Pb8.07Cu2+0.98Te6+1.96C1.17Cl3.83O15.34. Hagstromite is orthorhombic, space group Ibam, with a = 23.688(17), b = 9.026(8), c = 10.461(8) Å, V = 2237(3) Å3 and Z = 4. The crystal structure of hagstromite (R1 = 0.0659 for 284 I > 2σI reflections) contains a novel Cu2+Te6+2O12 chain assembled of corner-sharing Cu2+O4 squares and Te6+O6 octahedra. The O atoms in the chains form bonds with Pb2+ cations, which in turn bond to Cl– and CO32– anions, thereby creating a framework structure.

The Duotoushan deposit is an important Fe–Cu deposit in the Aqishan–Yamansu metallogenic belt of eastern Tianshan, NW China. Magnetite occurs in two main habits which are common in many Fe–Cu deposits, i.e. platy (TD1 Mag) and granular magnetite (TD2 Mag) have been identified at Duotoushan. Platy magnetite shows two different zones (bright and dark) based on the observations by scanning electron microscopy. The bright part (TD1-L) is the main part of TD1 magnetite and lacks inclusions. The dark part (TD1-D) is very porous and has abundant tiny silicate inclusions. Granular magnetite is usually anhedral with obvious oscillatory zoning in back-scattered electron images. In general, the dark zones of magnetite are characterised by greater Si, Ca, Al and lesser Fe contents than the bright zones. In situ X-ray diffraction (XRD) analysis shows that the lattice parameter of TD1 magnetite is approximately equal to that of standard magnetite and slightly higher than that of TD2 magnetite, indicating that some cations with ionic radii smaller than those of Fe2+ or Fe3+ entered the magnetite lattice by simple or coupled substitution mechanisms in TD2 magnetite.

The results in the present study show that the effects of temperature and $f_{{\rm O}_ 2}$ on platy magnetite are very limited and the changing fluid composition might be the major controlling factor for the formation of Duotoushan platy magnetite. Although the possibility that mushketovite transformed from hematite cannot be excluded entirely, evidence from in situ XRD data, pore-volume ratio calculation and the growth habit of intergrown minerals indicates that platy magnetite (TD1) coexisting with amphibole was more likely to have been precipitated originally from hydrothermal fluid. This was then affected by changes in the fluid composition which consequently led to dissolution of primary magnetite (TD1-L) and re-precipitation of TD1-D magnetite (with abundant porosity and mineral inclusions). Meanwhile, granular magnetite (TD2) with oscillatory zoning, and coexisting with epidote and quartz, was precipitated from fluid with periodic variation in temperature. These oscillatory zones are characterised by bands enriched in Si, Al and Ca alternating with bands depleted in these elements. The present investigation revealed a complex evolutionary process for magnetite formation in the Duotoushan deposit. The importance of combined investigation of texture and compositional characterisation of magnetite for study of the ore genesis and evolution of Fe–Cu deposits is highlighted.

Arsenopyrite (FeAsS) and realgar (As4S4) are two common arsenic minerals that often cause serious environmental issues. Centralised treatment of arsenic-containing tailings can reduce land occupation and save management costs. The current work examined the remediation schemes of tailings from Hunan Province, China, where by different tailings containing arsenopyrite and realgar were blended with exogenous slag zero valence iron (ZVI). Introducing Fe-oxidising bacteria (Acidithiobacillus ferrooxidans) recreates a biologically oxidative environment. All bioleaching experiments were done over three stages, each for 7 days and the solid phase of all tests was characterised by scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy and selective extraction analyses. The results showed that the mixture group reduced arsenic release by 72.9–74.7% compared with the control group. The addition of 0.2 g ZVI clearly decreased arsenic release, and the addition of 4.0 g ZVI led to the lowest arsenic release among all tests. The decrease of arsenic released from the tailings was due to the adsorption and uptake of arsenic by secondary iron-containing minerals and Fe–As(V) secondary mineralisation. The addition of large amounts of ZVI reduced the arsenic detected in the amorphous Fe precipitates. Therefore, a low cost and integrated strategy to reduce arsenic release from tailings is to mix two typical tailings and apply exogenous slag ZVI, which can apply to the in situ remediation of two kinds or more arsenic-containing tailings.

Cuyaite (IMA2019-126), Ca2Mn3+As3+14O24Cl, is a new arsenite mineral from near Cuya in the Camarones Valley, Arica Province, Chile. It is associated with anhydrite, native arsenic, arsenolite, calcite, claudetite, ferrinatrite, gajardoite-3R, leiteite, magnesiocopiapite, phosphosiderite, pyrite, realgar and talmessite and formed from the oxidation of As-bearing primary phases and alteration by saline fluids derived from evaporating meteoric water under hyperarid conditions. Cuyaite occurs as pale brown thin needles (elongated on [010]), typically in divergent sprays and subparallel intergrowths. The streak is white. Crystals are transparent with adamantine lustre; subparallel intergrowths exhibit silky lustre. The mineral has Mohs hardness of 2½, is brittle, exhibits no cleavage and has irregular fracture. The calculated density is 4.140 g cm–3. Cuyaite is optically biaxial (–), with α = 1.87(1), β = 1.956(calc) and γ = 1.98(1), determined in white light; 2Vmeas = 60(1)°; and orientation: X = b and Y ^ a = 53° in obtuse β. Electron microprobe analyses provided the empirical formula Ca2.03Mn3+0.95(As3+13.66Sb3+0.65)Σ14.31O24Cl0.88. The six strongest powder X-ray diffraction lines are [dobs Å(I)(hkl)]: 4.73(45)(111, $\bar{1}$12), 3.162(100)($\bar{3}$14), 3.035(28)(213), 3.004(37)(204), 2.931(90)($\bar{2}$15, 312) and 2.779(28)(020). Cuyaite is monoclinic, Pn, a = 14.7231(6), b = 5.58709(19), c = 17.4185(12) Å, β = 112.451(8)°, V = 1324.23(14) Å3 and Z = 2. In the crystal structure of cuyaite (R1 = 0.0369 for 2095 I > 2σI reflections), AsO3 pyramids share O corners to form a ‘loose’ 3D framework; Jahn–Teller distorted Mn3+O6 octahedra and CaO8 polyhedra link by edges and corners to form columns; the columns also link by edge- and corner-sharing to the AsO3 pyramids in the framework; Cl occupies channels along [010] in the framework. The Raman spectrum is consistent with the presence of multiple As3+O3 groups.

Langhofite, ideally Pb2(OH)[WO4(OH)], is a new mineral from the Långban mine, Värmland, Sweden. The mineral and its name were approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA2019-005). It occurs in a small vug in hematite–pyroxene skarn associated with calcite, baryte, fluorapatite, mimetite and minor sulfide minerals. Langhofite is triclinic, space group P$\bar{1}$, and unit-cell parameters a = 6.6154(1) Å, b = 7.0766(1) Å, c = 7.3296(1) Å, α = 118.175(2)°, β = 94.451(1)°, γ = 101.146(1)° and V = 291.06(1) Å3 for Z = 2. The seven strongest Bragg peaks from powder X-ray diffractometry are [dobs, Å (I)(hkl)]: 6.04(24)(010), 3.26(22)(11$\bar{2}$), 3.181(19)(200), 3.079(24)(1$\bar{1}$2), 3.016(100)(020), 2.054(20)(3$\bar{1}$1) and 2.050(18)(13$\bar{2}$). Langhofite occurs as euhedral crystals up to 4 mm, elongated along the a axis, with lengthwise striation. Mohs hardness is ca. 2½, based on VHN25 data obtained in the range 130–192. The mineral is brittle, with perfect {010} and {100} cleavages. The calculated density based on the ideal formula is 7.95(1) g⋅cm–3. Langhofite is colourless to white (non-pleochroic) and transparent, with a white streak and adamantine lustre. Reflectance curves show normal dispersion, with maximum values 15.7–13.4% within 400–700 nm. Electron microprobe analyses yield only the metals Pb and W above the detection level. The presence of OH-groups is demonstrated with vibration spectroscopy, from band maxima present at ~3470 and 3330 cm–1. A distinct Raman peak at ca. 862 cm–1 is related to symmetric W–oxygen stretching vibrations. The crystal structure is novel and was refined to R = 1.6%. It contains [W2O8(OH)2]6– edge-sharing dimers (with highly distorted WO6-octahedra) forming chains along [101] with [(OH)2Pb4]6+ dimers formed by (OH)Pb3 triangles. Chains configure (010) layers linked along [010] by long and weak Pb–O bonds, thus explaining the observed perfect cleavage on {010}. The mineral is named for curator Jörgen Langhof (b. 1965), who collected the discovery sample.

Biagioniite, ideally Tl2SbS2, is a new mineral from the Hemlo gold deposit, Marathon, Ontario, Canada. It occurs as very rare anhedral crystals up to 65 μm across associated with aurostibite, stibarsen and native gold in a calcite matrix. Biagioniite is opaque with a metallic lustre and shows a black streak. In reflected light biagioniite is moderately bireflectant and not pleochroic. Under crossed polars it is weakly anisotropic with blueish to light-blue rotation tints. Internal reflections are absent.

Reflectance percentages for the four standard wavelengths (Rmin and Rmax) are 35.9 and 37.5 (471.1 nm); 34.7 and 36.2 (548.3 nm); 33.8 and 35.3 (586.6 nm); and 31.5 and 33.7 (652.3 nm), respectively. A mean of four electron microprobe analyses gave: Tl 65.12(31), Ag 3.52(9), Sb 20.22(12), S 10.80(8), total 99.66 wt.%, corresponding, on the basis of a total of 5 atoms, to (Tl1.87Ag0.19)Σ2.06Sb0.97S1.97. Biagioniite is monoclinic, space group Pc, with a = 11.0895(9), b = 14.3124(11), c = 7.9352(6) Å, β = 96.230(8)°, V = 1252.02(17) Å3 and Z = 8. The four strongest powder-diffraction lines [d in Å (I/I0) (hkl)] are: 3.56 (100) (310); 3.37 (75) ($\bar{2}$31); 3.79 (60) (012); 3.03 (60) (032). In the crystal structure [R1 = 0.024 for 2655 reflections with I > 2σ(I)], thallium adopts various coordinations extending from quasi-linear to quasi-tetrahedral. Antimony forms Sb–Sb pairs, which lead to the formula [Tl+1]4[Sb2]4+[S2–]4. Biagioniite is isostructural with dervillite, Ag2AsS2. The new mineral has been approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA2019–120) and named for Cristian Biagioni, Associate Professor of Mineralogy at the Department of Earth Sciences of the University of Pisa, Italy.

Oxybismutomicrolite, ideally [(Bi3+,#)2]Σ4+Ta2O6O, where # = subordinate substituents, such as Na+, Ca2+ and vacancy (□), is a microlite-group, pyrochlore-supergroup mineral discovered at the Solnechnaya (‘Sunny’) pegmatite vein, Malkhan pegmatite field, Zabaykalskiy Kray, Central Transbaikalia, Russia. It forms rough octahedral crystals up to 1 mm across and equant grains up to 2 mm across embedded in an albite–lepidolite–elbaite complex. Other associated minerals are Bi-rich fluornatromicrolite, bismutotantalite and stibiotantalite. The new mineral is black, with resinous lustre; the streak is greyish white. It is non-fluorescent under ultraviolet light. Oxybismutomicrolite is brittle, with Mohs’ hardness of ~5. Cleavage is not observed, fracture is uneven. Dmeas. = 6.98(2) g/cm3 and Dcalc. = 7.056 g/cm3. The mineral is optically isotropic. The mean refractive index calculated from the Gladstone–Dale equation is 2.184. The infrared spectrum shows the absence of H2O molecules and OH groups. The chemical composition is (electron microprobe, wt.%): Na2O 3.45, CaO 2.88, MnO 0.31, PbO 0.76, Bi2O3 29.81, ThO2 0.18, TiO2 3.89, SnO2 1.77, Nb2O5 4.50, Ta2O5 51.08, F 1.17, O = F –0.49, total 99.31. The empirical formula, on the basis of 2 cations at the B site, is (Bi0.79Na0.68Ca0.32Mn0.03Pb0.02□0.16)Σ2.00(Ta1.42Ti0.30Nb0.21Sn0.07)Σ2.00O6.00(O0.52F0.38□0.10)Σ1.00. The crystal structure refinement (R = 0.019) gave the following data: cubic, Fd–3m, a = 10.4746(11) Å, V = 1149.2(4) Å3 and Z = 8. The eight strongest lines of the powder X-ray diffraction pattern [d, Å(I, %)(hkl)] are: 6.051(12)(111), 3.160(10)(311), 3.026(100)(222), 2.621(32)(400), 1.854(33)(440), 1.581(27)(622), 1.514(7)(444) and 1.203(7)(662). Type material is deposited in the collections of the Fersman Mineralogical Museum of the Russian Academy of Sciences, Moscow, Russia, registration number 5409/1.