Arched magnetized structures are a common occurrence in space and laboratory plasmas. Results from a laboratory experiment on spatio-temporal evolution of an arched magnetized plasma ($\beta \approx 10^{-3}$, Lundquist number $\approx 10^{4}$, plasma radius/ion gyroradius $\approx 20$) in a sheared magnetic configuration are presented. The experiment is designed to model conditions relevant to the formation and destabilization of similar structures in the solar atmosphere. The magnitude of a nearly horizontal overlying magnetic field was varied to study its effects on the writhe and twist of the arched plasma. In addition, the direction of the guiding magnetic field along the arch was varied to investigate its role in the formation of either forward- or reverse-S shaped plasma structures. The electrical current in the arched plasma was well below the current required to make it kink unstable. A significant increase in the writhe of the arched plasma was observed with larger magnitudes of overlying magnetic field. A forward-S shaped arched plasma was observed for a guiding magnetic field oriented nearly antiparallel to the initial arched plasma current, while the parallel orientation yielded the reverse-S shaped arched plasma.

A three-dimensional fully kinetic particle-in-cell (PIC) simulation strategy has been implemented to simulate the acceleration stage of a magnetically enhanced plasma thruster (MEPT). The study has been performed with the open-source code Spacecraft Plasma Interaction Software (SPIS). The tool has been copiously modified to simulate properly the dynamics of a magnetized plasma plume. A cross-validation of the methodology has been done with Starfish, a two-dimensional open-source PIC software. Two configurations have been compared: (i) in the absence of a magnetic field and (ii) in the presence of a magnetic field generated by a coil with maximum intensity of 300 G at the thruster outlet. The results show a reduction of the plume divergence angle, an increase of ion speed and an increase of the specific impulse in the presence of the magnetic nozzle. The simulations presented in this study are representative of the operative conditions of a 50 W MEPT. Nonetheless, the methodology adopted can be extended to handle the magnetized plasma plume of several other types of thrusters such as electron cyclotron resonance and applied field magnetoplasmadynamic thrusters.

Recently, the energization of superthermal electrons at the Earth's bow shock was found to be consistent with a new magnetic pumping model derived in the limit where the electron transit time is much shorter than any time scale governing the evolution of the magnetic fields. The new model breaks with the common approach of integrating the kinetic equations along unperturbed orbits. Rather, the fast transit-time limit allows the electron dynamics to be characterized by adiabatic invariants (action variables) accurately capturing the nonlinear effects of electrons becoming trapped in magnetic perturbations. Without trapping, fast parallel streaming along magnetic field lines causes the electron pressure to be isotropized and homogeneous along the magnetic field lines. In contrast, trapping permits spatially varying pressure anisotropy to form along the magnetic field lines, and through a Fermi process this pressure anisotropy in turn becomes the main ingredient that renders magnetic pumping efficient for energizing superthermal electrons. We here present a detailed mathematical derivation of the model.

The process of radiation pressure acceleration (RPA) of ions is investigated with the aim of suppressing the Rayleigh–Taylor-like transverse instabilities in laser–foil interaction. This is achieved by imposing surface and density modulations on the target surface. We also study the efficacy of RPA of ions from density modulated and structured targets in the radiation dominated regime where the radiation reaction effects are important. We show that the use of density modulated and structured targets and the radiation reaction effects can help in achieving the twin goals of high ion energy (in GeV range) and lower energy spread.

The GENE-3D code, the global stellarator version of the established GENE framework, has been extended to an electromagnetic gyrokinetic code. This paper outlines the basic structure of the algorithm, highlighting the treatment of the electromagnetic terms. The numerical implementation is verified against the radially global GENE code in linear and nonlinear tokamak simulations, recovering excellent agreement between both codes. As a first application to stellarator plasmas, linear and nonlinear global simulations with kinetic electrons of ion temperature gradient (ITG) turbulence in Wendelstein 7-X were performed, showing a decrease of ITG activity through the introduction of electromagnetic effects via a finite plasma-$\beta$. The upgrade makes it possible to study a large variety of new physical scenarios, including kinetic electron and electromagnetic effects, reducing the gap between gyrokinetic models and physically realistic systems.

We present two generalized hybrid kinetic-Hall magnetohydrodynamics (MHD) models describing the interaction of a two-fluid bulk plasma, which consists of thermal ions and electrons, with energetic, suprathermal ion populations described by Vlasov dynamics. The dynamics of the thermal components are governed by standard fluid equations in the Hall MHD limit with the electron momentum equation providing an Ohm's law with Hall and electron pressure terms involving a gyrotropic electron pressure tensor. The coupling of the bulk, low-energy plasma with the energetic particle dynamics is accomplished through the current density (current coupling scheme; CCS) and the ion pressure tensor appearing in the momentum equation (pressure coupling scheme; PCS) in the first and the second model, respectively. The CCS is a generalization of two well-known models, because in the limit of vanishing energetic and thermal ion densities, we recover the standard Hall MHD and the hybrid kinetic-ions/fluid-electron model, respectively. This provides us with the capability to study in a continuous manner, the global impact of the energetic particles in a regime extending from vanishing to dominant energetic particle densities. The noncanonical Hamiltonian structures of the CCS and PCS, which can be exploited to study equilibrium and stability properties through the energy-Casimir variational principle, are identified. As a first application here, we derive a generalized Hall MHD Grad–Shafranov–Bernoulli system for translationally symmetric equilibria with anisotropic electron pressure and kinetic effects owing to the presence of energetic particles using the PCS.

The mechanism of harmonic generation in both O- and X-mode configurations for a magnetized plasma has been explored here in detail with the help of particle-in-cell simulations. A detailed characterization of both the reflected and transmitted electromagnetic radiation propagating in the bulk of the plasma has been carried out for this purpose. The efficiency of harmonic generation is shown to increase with the incident laser intensity. A dependency of harmonic efficiency has also been found on magnetic field strength. This work demonstrates that there is an optimum value of the magnetic field at which the efficiency of harmonic generation maximizes. The observations are in agreement with theoretical analysis. For the O-mode configuration, this is compelling as the harmonic generation provides for a mechanism by which laser energy can propagate inside an overdense plasma region.

The self-focusing condition of a charged particle beam in a resistive plasma has been studied. When plasma heating is weak, the beam focusing is intensified by increasing the beam density or velocity. However, when plasma heating is strong, the beam focusing is only determined by the beam velocity. Especially, in weak heating conditions, the beam trends to be focused into the centre as a whole, and in strong heating conditions, a double-peak structure with a hollow centre is predicted to appear. Furthermore, it is found that the beam radius has a significant effect on focusing distance: a larger the beam radius will result in a longer focusing distance. Simulation results also show that when the beam radius is large enough, filamentation of the beam appears. Our results will serve as a reference for relevant beam–plasma experiments and theoretical analyses, such as heavy ion fusion and ion-beam-driven high energy density physics.

The tertiary instability is believed to be important for governing magnetised plasma turbulence under conditions of strong zonal flow generation, near marginal stability. In this work, we investigate its role for a collisionless strongly driven fluid model, self-consistently derived as a limit of gyrokinetics. It is found that a region of absolute stability above the linear threshold exists, beyond which significant nonlinear transport rapidly develops. Characteristically, this range exhibits a complex pattern of transient zonal evolution before a stable profile can arise. Nevertheless, the Dimits transition itself is found to coincide with a tertiary instability threshold, so long as linear effects are included. Through a simple and readily extendable procedure, tracing its origin to St-Onge (J. Plasma Phys., vol. 83, issue 05, 2017, 905830504), the stabilising effect of the typical zonal profile can be approximated, and the accompanying reduced mode estimate is found to be in good agreement with nonlinear simulations.

General nonlinear equations describing reversed shear Alfvén eigenmode (RSAE) self-modulation via zero-frequency zonal structure (ZFZS) generation are derived using nonlinear gyrokinetic theory, which are then applied to study the spontaneous ZFZS excitation as well as RSAE nonlinear saturation. It is found that both electrostatic zonal flow and electromagnetic zonal current can be preferentially excited by finite-amplitude RSAE, depending on specific plasma parameters. The modification to local shear Alfvén wave continuum is evaluated using the derived saturation level of zonal current, which is shown to play a comparable role in saturating RSAE with the ZFZS scattering.

In stellarator optimization studies, the boundary of the plasma is usually described by Fourier series that are not unique: several sets of Fourier coefficients describe approximately the same boundary shape. A simple method for eliminating this arbitrariness is proposed and shown to work well in practice.

We investigate the influence of charged dust on the incoherent scatter from the D-region ionosphere. Incoherent scatter is observed with high-power, large aperture radars and results from electromagnetic waves scattering at electrons that are coupled to other charged components through plasma oscillations. The influence of charged dust can hence be considered an effect of dusty plasma. The D-region contains meteoric smoke particles that are of nanometre size and form from incoming ablating meteors. Detection of such charged dust in the incoherent scatter spectrum from the D-region has previously been proposed and studied to some degree. We here present model calculations to investigate the influence of the charged dust component with a size distribution, instead of the one size dust components assumed in other works. The developed code to calculate the incoherent scatter spectrum from the D-region including dust particles with different sizes and different positive and negative charge states is made available (https://doi.org/10.18710/GHZIIY). We investigate how sizes, number density and charge state of the dust influence the spectrum during different ionospheric conditions. We consider the ionospheric parameters for the location of the EISCAT VHF radar during a year and find that conditions are most suitable for dust detection in winter below 80 km at times with increased electron densities. The prospects to derive dust parameters increase, when the incoherent scatter observations are combined with those of other instruments to provide independent information on electron density, neutral density and temperature.

Motivated by recent discussions on the possible role of quantum computation in plasma simulations, here, we present different approaches to Koopman's Hilbert-space formulation of classical mechanics in the context of Vlasov–Maxwell kinetic theory. The celebrated Koopman–von Neumann construction is provided with two different Hamiltonian structures: one is canonical and recovers the usual Clebsch representation of the Vlasov density, the other is non-canonical and appears to overcome certain issues emerging in the canonical formalism. Furthermore, the canonical structure is restored for a variant of the Koopman–von Neumann construction that carries a different phase dynamics. Going back to van Hove's prequantum theory, the corresponding Koopman–van Hove equation provides an alternative Clebsch representation which is then coupled to the electromagnetic fields. Finally, the role of gauge transformations in the new context is discussed in detail.

Electron energization during merging of magnetized plasmas is studied using the OMEGA and OMEGA EP laser facilities by colliding two plasma plumes, each containing a Biermann-battery self-generated magnetic field. Two neighbouring plasma plumes are produced by intense laser beams, and the anti-parallel Biermann fields merge and reconnect in the process of the plumes’ expansion and collision. To isolate the merging as an acceleration source, the electron energy spectra obtained from two-plume collision shots are compared with the spectra from single-plume shots. Single-plume shots exhibit an energized electron tail with energies up to ${\sim }250\ \textrm {keV}$. The electrons in merging experiments are additionally accelerated by ${\sim }50\text {--}100$ keV compared to single-plume shots.

The parallel expansion of a dense, pellet-produced plasmoid is modelled with parameters relevant to pellet fuelling experiments in the Wendelstein7-X stellarator. Good agreement is found between the analytical theory and more detailed modelling. In particular, much of the energy deposited in the pellet by the ambient plasma is transferred to the pellet ions by the ambipolar electric field during the expansion. The validity of the hydrodynamic treatment of the plasmoid and the ambient plasma is discussed.

In the ion cyclotron range of frequencies, electromagnetic surface waves are physically relevant for wave–filament interactions, parasitic edge losses and sheath–plasma waves. They are also important numerically, where non-physical surface waves may occur as side effects of slab-geometry approximations. We give new, completely general, mathematical techniques to construct dispersion relations for electromagnetic surface waves between any two media, isotropic or anisotropic, and first-order corrections for when the material interface is steep but continuous. We discuss numerical issues (localized non-convergence, undesired power generation) that arise in numerical calculations due to the presence of surface waves.

The stepped-pressure equilibrium code (SPEC) (Hudson et al., Phys. Plasmas, vol. 19, issue 11, 2012, 112502) is extended to allow the computation of multi-region, relaxed magnetohydrodynamics (MRxMHD) equilibria at prescribed toroidal current profile. Toroidal currents are expressed in the framework of the MRxMHD theory, exhibiting spatial separation between pressure driven and externally driven currents. Additionally, analytical force balance derivatives at constant toroidal current are deployed in order to maintain SPEC's advantageous speed. The newly implemented capability is verified in screw pinch and classical stellarator geometries, and is applied to obtain the equilibrium $\beta$-limit of a classical stellarator without net toroidal currents. This new capability opens the possibility to study the effect of toroidal current on three-dimensional equilibria with the SPEC code.

In the scrape-off layer and the edge region of a tokamak, the plasma is strongly turbulent and scatters the radiofrequency (RF) electromagnetic waves that propagate through this region. It is important to know the spectral properties of these scattered RF waves, whether used for diagnostics or for heating and current drive. The spectral changes influence the interpretation of the obtained diagnostic data, and the current and heating profiles. A full-wave, three-dimensional (3-D) electromagnetic code ScaRF (see Papadopoulos et al., J. Plasma Phys., vol. 85, issue 3, 2019, 905850309) has been developed for studying the RF wave propagation through turbulent plasma. ScaRF is a finite-difference frequency-domain (FDFD) method used for solving Maxwell's equations. The magnetized plasma is defined through the cold plasma by the anisotropic permittivity tensor. As a result, ScaRF can be used to study the scattering of any cold plasma RF wave. It can also be used for the study of the scattering of electron cyclotron waves in ITER-type and medium-sized tokamaks such as TCV, ASDEX-U and DIII-D. For the case of medium-sized tokamaks, there is experimental evidence that drift waves and rippling modes are present in the edge region (see Ritz et al., Phys. Fluids, vol. 27, issue 12, 1984, pp. 2956–2959). Hence, we have studied the scattering of RF waves by periodic density interfaces (plasma gratings) in the form of a superposition of spatial modes with varying periodicity and random amplitudes (see Papadopoulos et al., J. Plasma Phys., vol. 85, issue 3, 2019, 905850309). The power reflection coefficient (a random variable) is calculated for different realizations of the density interface. In this work, the uncertainty of the power reflection coefficient is rigorously quantified by use of the Polynomial Chaos Expansion (see Xiu & Karniadakis, SIAM J. Sci. Comput., vol. 24, issue 2, 2002, pp. 619–644) method in conjunction with the Smolyak sparse-grid integration (see Papadopoulos et al., Appl. Opt., vol. 57, issue 12, 2018, pp. 3106–3114), which is known as the PCE-SG method. The PCE-SG method is proven to be accurate and more efficient (roughly a 2-orders of magnitude shorter execution time) compared with alternative methods such as the Monte Carlo (MC) approach.

Using the field–particle correlation technique, we examine the particle energization in a three-dimensional (one spatial dimension and two velocity dimensions; 1D-2V) continuum Vlasov–Maxwell simulation of a perpendicular magnetized collisionless shock. The combination of the field–particle correlation technique with the high-fidelity representation of the particle distribution function provided by a direct discretization of the Vlasov equation allows us to ascertain the details of the exchange of energy between the electromagnetic fields and the particles in phase space. We identify the velocity-space signatures of shock-drift acceleration of the ions and adiabatic heating of the electrons arising from the perpendicular collisionless shock by constructing a simplified model with the minimum ingredients necessary to produce the observed energization signatures in the self-consistent Vlasov–Maxwell simulation. We are thus able to completely characterize the energy transfer in the perpendicular collisionless shock considered here and provide predictions for the application of the field–particle correlation technique to spacecraft measurements of collisionless shocks.