Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-06T07:48:06.141Z Has data issue: false hasContentIssue false
  • English
  • Français

Sol-gel-derived photosensitive TiO2 and Cu/TiO2 using homogeneous hydrolysis technique

Published online by Cambridge University Press:  31 January 2011

Jeffrey C.S. Wu  and
Chih-Yang Yeh
Jeffrey C.S. Wu*
Affiliation:
Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan 10617, Republic of China
Chih-Yang Yeh
Affiliation:
Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan 10617, Republic of China
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

Titania and copper-loaded titania were synthesized by an improved sol-gel method using a homogeneous hydrolysis technique. Unlike the conventional sol-gel procedure that added water directly, the esterification of anhydrous butanol and glacial acetic acid provided the hydrolyzing water. In addition, acetic acid also served as a chelating ligand to stabilize the hydrolysis-condensation process and minimize the agglomeration of titania. Fourier transform infrared spectra confirmed the presence of bidental ligand. The sol was dried, then calcined at 500°C to remove organics and transformed to anatase titania. Transmission electron microscopy revealed that the titania particles were uniform, and the particle size ranged from 10 to 25 nm. The band gaps of TiO2 and Cu/TiO2 ranged from 3.01 to 3.17 eV based on the diffusive reflective ultraviolet-visible spectrometry. X-ray photoelectron spectroscopy analysis showed a positive shift of binding energy of Ti2p3/2 and a negative shift of Cu 2p3/2 in Cu/TiO2. The redistribution of electric charge is due to the Schottky barrier of Cu and TiO2.

Type
Articles
Information
Journal of Materials Research , Volume 16 , Issue 2 , February 2001 , pp. 615 - 620
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Yamashita, H., Fujii, Y., Ichihashi, Y., Zhang, S.G., Ikeue, K., Park, D.R., Koyano, K., Tatsumi, T., and Anpo, M., Catal. Today 45, 221 (1968).CrossRefGoogle Scholar
2.Kuwabata, S., Nishida, K., Tsuda, R., Inoue, H., and Yoneyama, H., J. Electrochem. Soc. 141, 1498 (1994).CrossRefGoogle Scholar
3.Hirano, K., Inoue, K., and Yatsu, T., J. Photochem. Photobiol. A: Chema 64, 255 (1992).CrossRefGoogle Scholar
4.Brinker, C.J. and Scherer, G.W., Sol-gel Science, the Physics and Chemistry of Sol-Gel Processing (Academic Press, New York, 1990), Chap. 2.Google Scholar
5.Wu, J.C.S. and Cheng, L.C., J. Membr. Sci. 167(2), 253 (2000).CrossRefGoogle Scholar
6.Doeuff, S., Henry, M., and Sanchez, C., Mater Res. Bull. 25, 1519 (1990).CrossRefGoogle Scholar
7.Doeuff, S., Henry, M., Sanchez, C., and Livage, J., J. Non-Cryst. Solids 89, 206 (1987).CrossRefGoogle Scholar
8.Wolf, C. and Rüssel, C., J. Mater. Sci. 27, 3749 (1992).CrossRefGoogle Scholar
9.Munôz-Aguado, M.J., Gregorkiewitz, M., and Larbot, A., Mater. Res. Bull. 17, 87 (1992).CrossRefGoogle Scholar
10.Sanchez, E. and Lopez, T., Mater. Lett. 25, 271 (1995).CrossRefGoogle Scholar
11.Anpo, M., Shima, T., Kodama, S., and Kubokawa, Y., J. Phys. Chem. 91, 4305 (1987).CrossRefGoogle Scholar
12.Linsebigler, A.L., Lu, G., and Yates, J.T. Jr, Chem. Rev. 95, 735 (1995).CrossRefGoogle Scholar