Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-19T22:59:47.211Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical stress of the electrical performance of polycrystalline-silicon resistors

Published online by Cambridge University Press:  31 January 2011

N. Nakabayashi ,
H. Ohyama ,
E. Simoen ,
M. Ikegami ,
C. Claeys ,
K. Kobayashi ,
M. Yoneoka  and
K. Miyahara
N. Nakabayashi
Affiliation:
Mitsubishi Electric Company, 997 Miyoshi Nishigoshi Kumamoto, 861–1197 Japan
H. Ohyama
Affiliation:
Kumamoto National College of Technology, 2659–2 Nishigoshi Kumamoto, 861–1102 Japan
E. Simoen
Affiliation:
IMEC, Kapeldreef 75, B-3001 Leuven, Belgium
M. Ikegami
Affiliation:
Mitsubishi Electric Company, 997 Miyoshi Nishigoshi Kumamoto, 861–1197 Japan
C. Claeys
Affiliation:
IMEC, Kapeldreef 75, B-3001 Leuven, Belgium
K. Kobayashi
Affiliation:
Kumamoto National College of Technology, 2659–2 Nishigoshi Kumamoto, 61–1102 Japan
M. Yoneoka
Affiliation:
Kumamoto National College of Technology, 2659–2 Nishigoshi Kumamoto, 61–1102 Japan
K. Miyahara
Affiliation:
Kumamoto University, 2–39–1 Kurokami, Kumamoto, 860–8555 Japan
Get access

Abstract

Results are presented of a study on the mechanical stress dependence of the resistance of polycrystalline silicon (Poly-Si) films doped with different atomic species. Two types of Poly-Si film implanted with boron and phosphorus ions were studied, namely, B-doped films of 400 nm and P-doped films of 250 nm thickness, which were deposited by low-pressure chemical vapor deposition at 620 °C on thermally oxidized silicon wafers. The film doping was done by ion implantation at 50 keV, with a dose of boron and phosphorus of 2 × 1014 and 5.3 × 1014 cm−2, respectively. The Poly-Si films were annealed in a N2 ambient at 1000 °C for 20 min to activate the implanted atoms. A controlled amount of external stress was applied to the silicon wafers to study the impact on the electrical performance of the implanted Poly-Si resistors. The resistance of the B-doped Poly-Si films is shown to increase by the mechanical stress, while the resistance of the P-implanted Poly-Si films remained unchanged. It is concluded that this difference is related to the structural differences between Poly-Si films implanted with boron and phosphorus, respectively.

Type
Articles
Information
Journal of Materials Research , Volume 16 , Issue 9 , September 2001 , pp. 2579 - 2582
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1Wortman, J.J., Hauser, J.R., and Burger, R.M., J. Appl Phys. 35, 2122 (1964).CrossRefGoogle Scholar
2Mikoshiba, H., Solid-State Electron. 24, 221 (1981).CrossRefGoogle Scholar
3Miyamoto, K., Nakagawa, O., Mitsuhashi, J., and Matsumoto, H., Int. Reliab. Phys. Symp. 51 (1986).Google Scholar
4Inayoshi, H., Nishi, K., Okikawa, S., and Wakashima, Y., Int. Reliab. Symp. 113 (1981).Google Scholar
5Isagawa, M., Iwasaki, Y., and Sutoh, T., Int. Reliab. Phys. Symp. 171 (1980).Google Scholar
6Curry, J., Fitzgibbon, G., Guan, Y., Muollo, R., Nelson, G., and Thomas, A., Int. Reliab. Phys. Symp. 6 (1984).Google Scholar
7Nakabayashi, M., Ikegami, M., and Daikoku, T., Jpn. J. Appl. Phys. 32, 3734 (1993).CrossRefGoogle Scholar
8Lu, N.C-C., Gerzberg, L., Lu, C.Y., and Meindl, J.D., IEEE Trans. Electron Devices 30, 137 (1983).CrossRefGoogle Scholar
9Mandurah, M.M., et al., J. Appl. Phys. 51, 5755 (1980).CrossRefGoogle Scholar
10Wong, C.Y., Grovernor, C.R.M., Batson, P.E., and Smith, D.A., J. Appl. Phys. 57, 438 (1984).CrossRefGoogle Scholar