Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-23T11:52:04.240Z Has data issue: false hasContentIssue false
  • English
  • Français

Indentation plastic displacement field: Part II. The case of hard films on soft substrates

Published online by Cambridge University Press:  31 January 2011

T. Y. Tsui ,
Joost Vlassak  and
William D. Nix
T. Y. Tsui*
Affiliation:
Advanced Micro Devices, One AMD Place, Sunnyvale, California 94088
Joost Vlassak
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, California 94305
William D. Nix
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, California 94305
*
a)Address all correspondence to this author. e-mail: [email protected].
Get access

Abstract

The plastic displacements around Knoop indentations made in hard titanium/aluminum multilayered films on soft aluminum alloy substrates have been studied. Indentations were cross-sectioned and imaged using focused-ion-beam (FIB) milling and high-resolution scanning electron microscopy (SEM), respectively. The FIB milling method has the advantage of removing material in a localized region without producing mechanical damage to the specimen. The micrographs of the cross-sectioned indentations indicate that most of the plastic deformation around the indentation is dominated by the soft aluminum substrate. There is a very small change in the multilayered film thickness around the indentation—less than 10%. The plastic deformation of the thin film resembles a membrane being deflected by a localized pressure gradient across the membrane. Stress-induced voids are also observed in the multilayered film, especially in the area around the indentation apex. The density and the size of the voids increase with indentation depth. Indentation sink-in effects are observed in all of the indentations inspected. Based on the experimental results, the amount of sink-in of the hard film–soft substrate composite is larger than the bulk substrate and film alone. This is confirmed by the finite element analyses conducted in this work.

Type
Articles
Information
Journal of Materials Research , Volume 14 , Issue 6 , June 1999 , pp. 2204 - 2209
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Anders, S., Callahan, D. L., Pharr, G. M., and Tsui, T. Y., Surf. Coat. Technol. 94–5, 189–194 (1997).CrossRefGoogle Scholar
2.Anders, S., Ager, J.W. III, Brown, I. G., Pharr, G. M., and Tsui, T.Y., Thin Solid Films 308, 186–190 (1997).CrossRefGoogle Scholar
3.Burnett, P. J. and Rickerby, D. S., Thin Solid Films 148, 41–50 (1987).CrossRefGoogle Scholar
4.Burnett, P. J. and Rickerby, D. S., Thin Solid Films 148, 51–65 (1987).CrossRefGoogle Scholar
5.Gorbatkin, S.M., Rhodes, R.L., Tsui, T.Y., and Oliver, W. C., Appl. Phys. Lett. 65 (21), 131–141 (1994).Google Scholar
6.Pharr, G.M., Callahan, D. L., McAdams, S. D., Tsui, T.Y., Anders, S., Anders, A., Ager, J.W. III, and Brown, I. G., Appl. Phys. Lett. 68 (6), 779–781 (1996).CrossRefGoogle Scholar
7.Tsui, T.Y. et al., in Mechanical Behavior of Diamond and other Forms of Carbon, edited by Drory, M.D., Bogy, D.B., Donley, M.S., and Field, J. E. (Mater. Res. Soc. Symp. Proc. 383, Pittsburgh, PA, 1995), p. 447.Google Scholar
8.Oliver, W.C. and Pharr, G. M., J. Mater. Res. 7, 1564–1582 (1992).Google Scholar
9.Bhattacharya, A. K. and Nix, W. D., Int. J. Solid Struct. 24 (12), 1287–1298 (1988).Google Scholar
10.Gao, H. and Wu, T.W., J. Mater. Res. 8, 3229–3232 (1993).Google Scholar
11.Stone, D. S., J. Electron. Pack. 112, 41–46 (1990).Google Scholar
12.Tsui, T. Y., Ross, C. A., and Pharr, G. M., in Materials Reliability in Microelectronics VII, edited by Clement, J. J., Keller, R. R., Krisch, K. S., Sanchez, J.E. Jr, and Suo, Z. (Mater. Res. Soc. Symp. Proc. 473, Pittsburgh, PA, 1997), pp. 57–62.Google Scholar
13.Hay, J. C. and Pharr, G.M., in Thin Films—Stresses and Mechanical Properties VII, edited by Cammarata, R. C., Busso, E. P., Nastasi, M., and Oliver, W.C. (Mater. Res. Soc. Symp. Proc. 505, Warrendale, PA 1998), pp. 65–70.Google Scholar
14.Vlassak, J. J., Tsui, T.Y., and Nix, W.D., in Thin Films—Stresses and Mechanical Properties VII, edited by Cammarata, R.C., Busso, E. P., Nastasi, M., and Oliver, W. C. (Mater. Res. Soc. Symp. Proc. 505, Warrendale, PA, 1998), pp. 71–76.Google Scholar
15.Courtney, T.H., Mechanical Behavior of Materials, 1st ed., Materials Science and Engineering (McGraw-Hill Publishing Company, New York, 1990).Google Scholar
16.Ma, Q. and Clarke, D.R., J. Mater. Res. 10, 853–863 (1995).CrossRefGoogle Scholar
17.Tsui, T.Y., Factors Limiting the Accuracy of Mechanical Property Measurement by Nanoindentation, Rice University, Ph.D. Thesis (1996).Google Scholar
18.Upit, G.P. and Varchenya, S. A., The Size Effect in the Hardness of Single Crystal, in The Science of Hardness Testing and Its Research Applications, edited by Westbrook, J. H. and Conard, H. (American Society for Metals, Metals Park, OH, 1971).Google Scholar
19.Nix, W.D. and Gao, H. J., J. Mech. Phys. Solids 46 (3), 411–425 (1998).Google Scholar
20.Tsui, T.Y., Vlassak, J., and Nix, W. D., J. Mater. Res. 14, 2196 (1999).CrossRefGoogle Scholar