This paper proposes a compact, low-loss, and low-cost phase shifter for millimeter-wave/sub-THz applications. The basic idea is to perturb the propagation constant of a high resistivity silicon image guide by high-dielectric constant barium lanthanide tetratitanates (BLT) ceramic loading. Three different BLT ceramic samples have been tested. The measured maximum phase-shift variation reaches 150° at 100 GHz with an average insertion loss of 2.85 dB and an insertion loss variation <0.7 dB for a sample of a 5-mm length. The proposed phase shifter has a bandwidth from 95 to 105 GHz. A low-cost fabrication technology has been developed and used to realize this phase shifter.

This paper presents a review of filtering methods to eliminate echo in antenna measurements. Two different methods, fast Fourier transform and Matrix Pencil, are explained, compared, and simulated in a planar near field where other effects, such as aliasing, can and will be present if the simulation is not appropriately made and the parameters are not carefully chosen. Finally both methods are applied to real measurements of a dipole in a Microwave Vision Group multiprobe system and of a horn in a single-cut measurement. Other effects, such as window shift, may appear depending on the geometry of the system where the measurement is taken. These effects must be taken into consideration and carefully corrected.

A shorted magneto electric dipole with orthogonal dual polarization is designed for modern wireless communications. The proposed antenna is a wideband dual-polarized antenna consisting of magneto electric dipoles, which are fed by novel hook-shaped strip feeds. The antenna proposed in this paper is simulated using EM simulation software called high-frequency structure simulator. The simulated and measured results are presented. This antenna achieves 45.4% of impedance bandwidth of −10 dB RL for frequency range from 1.7 to 2.7 GHz. This frequency range covers the wireless communications applications like GSM 1800/1900, WCDMA, Bluetooth, Wi-Fi, etc.

In this paper, a novel microstrip bandpass filter is proposed to enhance sideband selectivity, suppress harmonic frequency up to three-order as well as to keep a miniaturized size for frequency synthesizer application. The filter is constructed by four λ/4 folded stepped-impedance resonators (FSIRs) and two λ/2 stepped-impedance resonators at input/output ports to create three pairs of coupling paths and then to produce three cross-coupling transmission zeros (TZs) as well as to achieve a size miniaturization with 96% reduction compared with the conventional filter. By adding a common grounded metallized via hole among four λ/4 FSIRs of the filter, additional four mixed electric and magnetic coupling paths are set to generate extra four TZs. With these seven TZs, the proposed filter achieves a good sideband selectivity and harmonic suppression. Finally, the filter is designed, fabricated, and measured, its measured results are in well agreement with its simulated results.

This paper describes the design of a 12-monopole linear array to perform a radiation pattern in the array alignment plane. This antenna can be used for HyperLAN2 telecommunications in transit vehicles. The design is based on a rigorous method which synthesizes the feeds weights by considering the strong cumulative coupling between monopoles. The originality of this paper consists in considering the couplings to obtain the objective pattern. Without this approach, a significant performance alteration is observed. The array and the feed network have been designed and successfully measured.

In this paper, an antenna with 8 GHz (7–15 GHz) bandwidth is designed, simulated, fabricated, and measured. Commonly, for the effective use of electromagnetic sources, mode converters are used to transform donut-shaped patterns to directive patterns. This paper introduces a novel antenna called the pattern director antenna (PDA) that solves most problems associated with the azimuthally symmetric output modes of high-power microwave sources. The PDA accepts directly (without the need for mode conversion) an azimuthally symmetric generated mode of an electromagnetic source and converts it to radiate a directive pattern. For the proof of concept and validation of the design by simulations, the 3D printing technology [using polylactic acid (PLA)] is used to fabricate the PDA and measure its radiation patterns and return loss. The selected material is cheap and also environmentally friendly. The antenna was coated with aluminum to become a conductor. The gain is from 16.8 to 21.8 dB in the frequency range. The S11, main lobe deviation (MLD), and sidelobe level (SLL) are less than −15 dB, 2°, and −7 dB, in all frequency range, respectively. The simulation results are in good agreement with the measurement.

This paper presents a polarization-independent 11-bit chipless RFID tag based on frequency-selective surface which has been designed for encoding and relative humidity (RH) sensing applications. The 10 exterior U-shaped resonators are used for item encoding whereas Kapton has been incorporated with the interior resonator for RH sensing. This radio-frequency identification (RFID) tag operates in S- and C-frequency bands. The proposed design offers enhanced fractional bandwidth up to 88% with the density of 4.46 bits/cm2. Both single- and dual-layer tags have been investigated. The simulated results are in good agreement with measured results and a comparison with existing literature is presented to show the performance. Simple geometry, high code density, large frequency signature bandwidth, high magnitude bit, high radar cross-section, and angular stability for more than 75° are the unique outcomes of the proposed design. In addition, RH sensing has been achieved by integrating the Kapton on the same RFID tag.

In order to counter active jamming, an adaptive polarization cancellation method based on dual-polarization radar is proposed in the paper. First, respectively being obtained by vertical and horizontal polarization channels of dual-polarization radar, the signals from the real target and active jamming are analyzed in composition and characteristic. Then, the weight coefficient is timely derived in practical scene to adjust difference of amplitude and phase of active jamming signals respectively acquired by the two orthogonal polarization channels, so the method can completely eliminate active jamming, but just a little power change for the real target signal. Furthermore, a compensating method for the target signal is developed to improve the angle measuring accuracy of monopulse radars. And the influence factors of adaptive polarization cancellation are analyzed in detail by simulation. Finally, the experimental results prove that it is very effective on both active blanket jamming and active deception jamming.

Traditional millimeter-wave surface movement radar (SMR) has been designed and tested. A novel concept for the design of a new SMR is suggested based on synthetic aperture antenna and noise radar technology. It enables designing SMR without mechanical rotation of an antenna, but applying several nonmoving synthetic aperture antennas instead. Application of noise radar technology is also considered in more detail to improve the expected performance of a new SMR.

This paper presents the design methodology and the realization of a highly linear and power-efficient reconfigurable dual-band amplifier based on the continuous/Class-ABJ approach. The Class-ABJ theory allows presenting different reactive solutions on both fundamental and second harmonic terminations compared with the standard Class-AB mode. Despite the various terminations, a constant optimum output performance in terms of power, gain, and efficiency can still be achieved. The output impedances are then translated into frequency thus allowing the realization of broadband power amplifiers (PAs) at high-power level of 30 W. In this work, the Class-ABJ broadband approach will be used for the realization of a reconfigurable dual-band power amplifier operating in the two frequency bands 2.1–2.2 and 2.5–2.6 GHz. Continuous wave (CW) measurements on the realized PA show power and efficiency greater than 17 W and 55% in the two frequency bands with peak values up to 30 W and 63.7%. Indeed, it is shown that such novel modes can be predistorted and therefore the linearity requirement can also be met.

A method for improving range resolution in passive radar system is to jointly use more than one transmission channel of the same illuminator of opportunity (IO). This paper specifically focuses on the exploitation of multiple adjacent digital video broadcasting-terrestrial (DVB-T) channels for achieving high-range resolution profiles with a passive radar system operating in air surveillance scenario. Firstly, we present an analysis of the ambiguity function obtained from a multichannel DVB-T source and a pre-processing technique able to improve the characteristics of the multichannel signal are presented. Afterwards, the experimental scenario is defined and detection results on aerial targets are shown.

A compact coplanar waveguide (CPW)-fed circular polarization (CP)-antenna for new generation applications with dual bands filtering performance along with CP feature based on unit-cell semi-fractal is proposed in this paper. The CP-antenna privileges from semi-fractal radiator causes to have a miniaturized size. The stopped bands are designed to suppress the interference with present WLAN and ITU-R satellite systems. These properties are obtained by embedding semi-fractal unit-cell patterns stubs at the radiator and applying two rectangular-shaped slits inside CPW ground plane and a pair of grounded L-shaped strips. By introducing the first step of semi-fractal strips, and the mirrored defected ground surface structures, dual-band rejection functionality at WLAN (5–6 GHz) and ITU-R (7.725–8.5 GHz) are practically obtained. Besides that, semi-fractal strips results to two orthogonal modes stimulation on the radiator and CP attribute are obtained at WiMAX (3.1–3.7 GHz). CP-antenna presents omni-directional radiation H-plane patterns over the applicational frequency band. The CP-antennas size is 25 mm × 25 mm and fabricated on commercially available FR4-epoxy substrate with 1 mm thickness. Measured results illustrate that the proposed ultimate CP-antenna with miniaturized structure, efficient impedance tuning characteristics, and adequate radiation performances is the best choice for new generation of wireless communications.

In this paper, new planar spiral antennas with meander lines and loads for passive Radiofrequency identification tag application at ultra-high-frequency band are designed and optimized using the global best (gbest)-guided Artificial Bee Colony (GABC) algorithm. The GABC is an improved Artificial Bee Colony algorithm, which includes gbest solution information into the search equation to improve the exploitation. The optimization goals are antenna size minimization, gain maximization, and conjugate matching. The antenna dimensions were optimized and evaluated in conjunction with commercial software FEKO. GABC is compared with other popular algorithms. The optimization results produced show that GABC is a powerful optimization algorithm that can be efficiently applied to tag antenna design problems.

In this paper, non-uniform meandered line shunt capacitive RF-MEMS switch is presented at an elliptical patch etched with a split-ring resonator (SRR) for satellite communication applications. The non-uniform meander line shunt capacitive is a fixed-fixed type of RF-MEMS switch that is introduced in this model antenna. The proposed antenna design is resonated at 10.46 GHz with the return loss of −37.6 dB. The performance evolution of the proposed antenna design is evaluated with and without integrated RF-MEMS switch on the proposed antenna SRR. It is observed that the proposed model at the ON-state switch resonates at 10.57 GHz frequency with the return loss of −30 dB. Similarly, at the OFF-state switch, it resonates at 10.53 GHz frequency with the return loss of −43 dB. Al3N4 (aluminum nitride) is used for the switch as a dielectric material, hence the switch attains higher isolation. The actuation voltage of 7.9 V is required for the switch to actuate from ON to OFF state. The switch attains minimum insertion and return loss which is discussed in further sections. The proposed antenna is fabricated and tested by a vector network analyzer; there is a good agreement between the simulated and measured results.

An ultra-wideband (UWB) slot antenna for diversity applications is introduced. The overall structure of the antenna consists of two similar coplanar waveguide (CPW)-fed stepped rectangular slots placed in an orthogonal position. The slots are asymmetric with respect to their placement in the ground plane. The CPW feeds are double stepped and terminated on hexagonal patches for better impedance matching. A wide impedance bandwidth (measured) from 3 to 12 GHz with an isolation better than 15 dB is obtained with this antenna. To improve the isolation, the design is modified and an I-shaped slot strip is introduced between the two slot antennas. With this, the isolation is brought about 25 dB of most of the band, while the impedance bandwidth remains the same (2.8–12 GHz for port 1, measured and 2.9–12 GHz for port 2, measured). The far-field radiation patterns are also measured and a peak gain of about 5 dBi is obtained. Finally, the diversity parameters such as envelope correlation coefficient and capacity loss are calculated and found to have low values. The antenna is expected to be useful for UWB diversity applications with good isolation.

A novel online antenna array calibration method is presented in this paper for estimating direction-of-arrival (DOA) in the case of uncorrelated and coherent signals with unknown gain-phase errors. Conventional calibration methods mainly consider incoherent signals for uniform linear arrays with gain-phase errors. The proposed method has better performance not only for uncorrelated signals but also for coherent signals. First, an on-grid sparse technique based on the covariance fitting criteria is reformulated aiming at gain-phase errors to obtain DOA and the corresponding source power, which is robust to coherent sources. Second, the gain-phase errors are estimated in the case of uncorrelated and coherent signals via introducing an exchange matrix as the pre-processing of a covariance matrix and then decomposing the eigenvalues of the covariance matrix. Those parameters estimate values converge to the real values by an alternate iteration process. The proposed method does not require the presence of calibration sources and previous calibration information unlike offline ways. Simulation results verify the effectiveness of the proposed method which outperforms the traditional approaches.

A highly integrated transceiver microwave monolithic integrated circuit (MMIC) manufactured in a 200-GHz SiGe:C production technology is presented, applicable for sensing- and broadband communication applications. To simplify the analog frontend, the fully differential design is based on a homodyne architecture. It comprises an LO signal generation unit based on a wideband 60 GHz fundamental Voltage Controlled Oscillator (VCO) and an on-chip prescaler, covering the full operational frequency band of 57–64 GHz. Within this bandwidth, the upconverter exhibits an upconversion gain of 23.6–26.4 dB and a maximum output-referred 1-dB compression point of 14 dBm. The downconverter provides a Double Sideband (DSB) noise figure of 9–12 dB with a downconversion gain of 37–71 dB. On chip AC-coupling of the receiver IF-output with a lower −3 dB cut-off frequency as low as 16 kHz eliminates mixer DC-offsets and enables on-chip Intermediate Frequency (IF) amplification. The whole transceiver MMIC draws a current of 415 mA from a single 3.3 V supply and requires few components externally to the chip.

In this paper, a miniaturized CPW-fed tapered slot antenna (TSA) with a modified CPW to slot-line transition structure was introduced. An air-bridge and tapered slot edge (TSE) structure was also employed to broaden the transition bandwidth. Through these applied modifications, negative features of the original TSA (limitation of transition) and antipodal Vivaldi antenna (bad cross-polarization) are both removed, while all the positive features remained. Results showed that the proposed structure offered a broad bandwidth of 2.6–20 GHz and also exhibited an appropriate current distribution with high radiation efficiency. The radiation pattern was stable in the working frequency band with good directivity, gain, and low cross-polarization. The proposed antenna structure also presented satisfactory time-domain characteristics. In this study, we confirmed the simulation results through data measurements.

Wireless data communication is pushing towards 60 GHz and will most likely be served by SiGe and Complementary Metal Oxide Semiconductor (CMOS) technologies in the consumer market. Nevertheless, some applications are imposing superior performance requirements on the analog frontend, and employing III-V compound semiconductors can provide significant advantages with respect to transmitter power and noise figure. In this paper, we present essential building blocks and a novel single-chip low complexity transceiver Monolithic Microwave Integrated Circuit (MMIC) with integrated antenna switches for 60 GHz communication, fabricated in a 100 nm metamorphic high electron mobility transistor (mHEMT) technology. This technology features a measured noise figure of <2.5 dB in low-noise amplifiers at 60 GHz and the realized medium power amplifiers achieve more than 20 dBm saturated output power. Integrated antenna switches with an insertion loss of less than 1.5 dB enable the integration of the transmit and the receive stages on a single chip. A single-chip transceiver with external subharmonic Local Oscillator (LO) supply for its I/Q down- and up-converter achieves a linear conversion gain in both, the Transmit (Tx) and the Receive (Rx) paths, of more than 10 dB.

The control of cutoffs is of great interest in designs of circular waveguides. In this paper, this topic is investigated for pure transverse-electric (TE) and transverse-magnetic (TM) modes by taking advantage of anisotropic reactance lining loadings. It is found that the cutoffs of TE and TM modes are determined by the reactance in the azimuthal and axial directions, respectively. When the reactance values are positive, the cutoff frequencies are lower than those of a normal conducting waveguide with the same cross-section. However, in contrast to the claim made in the previous literature that the negative reactance values caused the same reducing effect on the cutoffs as the positive values did, the cutoffs are found to be increased by the negative reactances. The theoretical results are validated by the simulations using commercial software, where a delicate model with an approximate curved anisotropic impedance boundary is proposed for the first time. By lowering the TE cutoffs and raising the TM ones, some intriguing applications, such as single-mode bandwidth extension and degenerate mode avoidance, are predicted, which would pave a way for designs of novel waveguide devices.