In this paper, we present the electromagnetic modeling of a performance-enhanced planar Schottky diode for applications in terahertz (THz) frequencies. We provide a systematic simulation approach for analyzing our Schottky diode based on finite element method and lumped equivalent circuit parameter extraction. Afterward, we use the developed model to investigate the effect of design parameters of the Schottky diode on parasitic capacitive and resistive elements. Based on this model, device design has been improved by deep-trench formation in the substrate and using a closed-loop junction to reduce the amount of parasitic capacitance and spreading resistance, respectively. The results indicate that cut-off frequency can be improved from 4.1 to 14.1 THz. Finally, a scaled version of the diode is designed, fabricated, and well characterized to verify the validity of this modeling approach.

An axially slotted cylinder coated with two different types of inhomogeneous coating layers is considered. These inhomogeneous coatings have decreasing permittivity profiles. The effects of various parameters of these coatings upon the gain pattern have been investigated using numerical simulations. It is studied that the gain at certain observation angles can be enhanced or diminished by controlling the inhomogeneity parameters of these considered profiles. It is further studied that for specific type of considered inhomogeneous coatings, the forward direction gain can be enhanced significantly.

Two-dimensional scattering of a Gaussian beam by a homogeneous gyrotropic circular cylinder is presented. The incident Gaussian beam source is expanded as an approximate expression with Taylor's series. The transmitted field in the homogeneous gyrotropic cylinder is expressed in terms of the series of wave functions based on the integral equation. The unknown coefficients of the scattered fields are obtained with the aid of the boundary conditions of continuous tangential electric and magnetic fields. Some numerical results are presented and discussed. The result is in agreement with that available as expected when the Gaussian beam degenerates to a plane wave incidence case.

A wide-stopband bandpass-filtering power divider with high-frequency selectivity has been proposed in this paper. The input and output feeding lines and eight 1/4 wavelength resonators are used to realize the signal transmission. In order to obtain good frequency selectivity, source-load coupling transmission path is used to generate transmission zeros near the passband. A four-way power divider with bandpass-filtering response and high-frequency selectivity is designed, fabricated, and measured. The measured results agree with the simulated ones closely in the desirable frequency range. The measured center frequency of the power divider is 2.38 GHz with input return loss of 31.2 dB, while the measured insertion loss is about 1 dB (not including ideal 6 dB four-way power dividing insertion loss). Moreover, the measured 3-dB bandwidth is 12% and the measured stopband attenuation is >15 dB from 2.59 to 7.7 GHz. In addition, two transmission zeros of 1.9 and 2.8 GHz are located near the passband. The measured output isolations are all >15.7 dB.

Step-impedance resonators and step-impedance capacitor coupling pads are introduced to microstrip band-pass filters to suppress spurious stop-band responses up to the ninth order, thereby providing a very wide stop band. Combined with improvements in existing suppression techniques, the overall suppression in one of the filters, with 1 GHz center frequency and 42% bandwidth, is −54 dB, up to 8.9 GHz. By also using suitably placed resistors, spurious levels are now depressed to −67 dB up to 8.8 GHz, with only 0.03 dB extra pass-band loss.

A compact multi-layer N-way power-dividing structure with good isolation and output return loss performance is proposed. The isolation network is circularly distributed that constitutes a closed ring-shaped architecture. The equivalent circuit model is given and the [S] matrix is developed to analyse and design the power-dividing structure. Finally, a six-way power divider centered at 2.1 GHz is designed and fabricated. The measured and simulated results agree well with each other. The total size of the power divider is 0.13λg × 0.19λg.

In this article, the design of a new dual-band impedance transformer with ultra-high transforming ratio (UHTR) is presented. The closed-form expressions are derived analytically using a lossless transmission-line theory. To practically validate the proposed design concept, two examples of dual-band transformer working at smaller and larger frequency ratios are designed for different load impedance of 500, 1000, and 1500 Ω. Finally, three prototypes of dual-band transformer with UHTR are designed, fabricated, and tested. For all these prototypes, different frequency ratios (two operating frequencies can be chosen arbitrarily) are considered. The measured return loss of the prototypes is better than 15 dB at all the operating frequencies. The measured results are matched very closely with the simulated results. This design is then extended to match a complex load at two different frequencies. The multi-band characteristic is obtained by decomposing a shorted stub into a stepped impedance section of the proposed structure. With the necessary derivation and analysis, a tri-frequency matching network is designed for a transforming ratio of 10.

In this paper, we designed and developed a novel internal compact printed loop antenna for WWAN/WLAN/ISM/LTE smartphone applications. The proposed antenna is composed of a meander loop antenna and a capacitively coupled feeding line. It has a planar structure, with an overall dimension of 120 × 60 mm2, the antenna portion occupying a size of 20 × 60 mm2, which makes it suitable for practical smartphone applications. The results of our measurement reveal that the prototype antenna can provide two wide frequency bands of 712–1078 and 1757–2930 MHz, which cover multi-band for GSM850/GSM900/DCS1800/PCS1900/UMTS2100/IMT2000/WLAN2400/ISM2450/LTE700/LTE2300/ LTE2500. The antenna also shows good radiation characteristics and gain peaks for frequencies over the desired operating bands. We also studied the specific absorption rate (SAR) of the proposed antenna placed at the bottom of a mobile phone. The obtained SAR values are all below the SAR limit of 1.6 W/kg for the 1 g head tissue and 2.0 W/kg for the 10 g head tissue. We used CST Microwave Studio and Ansoft HFSS for the simulation and the design of the antenna and present in this paper the details of the design considerations, as well as the results on the reflection coefficient, the surface current distributions, the radiation characteristics, and the gain of the proposed antenna.

A highly efficient design procedure for dielectric-loading multi-band coaxial-type feed antennas is proposed in this paper. Cylindrical modal matching method is employed for generalized scattering matrix calculation inside the feed, while spherical wave expansion is adopted for the feed aperture discontinuity in consideration of the outer shape. Closed-form scattering matrices with respect to different junctions help realize higher computational efficiency than the full-wave simulation solvers, and thus enable rapid optimization in terms of various electrical functional requirements across multiple frequency bands simultaneously. A Ku/Ka multi-band feed is investigated as a numerical example. Excellent radiation performances, including the low cross-polarization level, constant beamwidth, stable phase center, high return loss, and high isolation between bands of interest are achieved by employing multi-scalar rings, dielectric loading, and a three-port hybrid junction. The design is validated by experimental results from a manufactured prototype. Good consistency confirms the accuracy of our numerical approach, and demonstrates the proposed feed a good candidate for Ku/Ka-band satellite communication antenna systems.

A novel uniplanar wideband magneto-electric dipole antenna element is proposed in this paper. The proposed antenna is composed of the conventional bow-tie radiation patch as an electric dipole, a semi-circular loop, which works as a magnetic dipole, a coplanar ground plane, two directors with different lengths for enhancing gain, and a microstrip-to-coplanar stripline transition balun. The designed antenna adopts a small-size coplanar ground plane to achieve a uniplanar structure. Consequently, this method reduces the space size immensely and makes the antenna suitable for the array application. In addition, a tapered slot structure is utilized to improve impedance matching. The prototype of the proposed antenna was fabricated and measured. The measured results keep in good accordance with the simulated ones. The simulated results show that the proposed antenna obtains a broad impedance bandwidth of 60.5% from 2.25 to 4.20 GHz (voltage standing wave ratio [VSWR] ≤ 2) which can be applied for wireless local area network (WLAN) (2.4–2.484 GHz), worldwide interoperability for microwave access (WiMAX) (2.5–2.69/3.4–3.69 GHz), and long term evolution (LTE) (2.5–2.69 GHz). Meanwhile, the stable gain, low cross-polarization, stable unidirectional radiation patterns, and low back lobe are obtained within the operating frequency band. The array composed of the proposed antenna elements is also investigated in this paper.

The correlation coefficient (ρ) is an important metric for the evaluation of multiple-input–multiple-output (MIMO) antenna systems because it describes the relationship between the channels in a particular propagation environment. Highly correlated channels will degrade the MIMO system performance. Various methods to calculate ρ are analyzed in this work using three different types of antennas with different efficiencies and radiating properties. While the field-based method for finding ρ gives the most accurate results and should be used all the time. It is independent of antenna efficiency. The the S-parameter-based method might give reasonable results only when the antenna efficiency is very high and the patterns are separated in space, but in most cases, it underestimates ρ values and thus is not a reliable method and should be avoided. Incorporating the antenna efficiency can improve the ρ estimates using the S-parameters method under some specific conditions. The equivalent circuit method provides reasonable results for symmetric antenna structures only, and is the most complex in formulation. As part of the evaluation, two existing methods incorporating the radiation efficiency of the antennas are generalized to N-ports for the first time. Although less accurate than the field-based method, these extensions allow the evaluation of ρ for N-port antennas using only the radiation efficiency and the S-parameters of the antenna. The effect of the beam tilts on ρ estimation is investigated for the first time.

In this paper, a miniaturized elevated-coplanar-waveguide-fed antenna with a slotted ground plane is proposed. This antenna has a compact size of 25 mm × 25 mm × 1.6 mm where the ground plane is reduced by etching a trapezoidal slot along with two extended slits. A −10 dB wide-impedance bandwidth of 126% ranging from 2.8 to 12.4 GHz is achieved for the proposed antenna. The proposed antenna is successfully manufactured and experimentally investigated. The measurement shows a good agreement with the simulation. The measured radiation characteristic shows a stable and nearly omnidirectional pattern over the operating bandwidth region. The effects of various parameters on the antenna performance are analyzed and discussed as well.

A novel compact directional antenna with improved gain is proposed for microwave breast imaging (MBI) applications. The radiating fins are modified by etching several slots to make the antenna compact and enhance antenna performance in terms of bandwidth, gain, efficiency, and directivity. Several parameters are studied and optimized to frequency from 3.1 to 6.5 GHz, which is typically used in the breast imaging system. The electrical length of the antenna is 0.39λ × 0.46λ × 0.01λ at the lower frequency band. The result shows that the antenna exhibits −10 dB impedance bandwidth of 4.3 GHz (2.7–7 GHz) with directional radiation pattern. The peak gain of the proposed prototype is 7.8 dBi and fractional bandwidth is 92%. The time domain results show that the fidelity factor for face to face is 0.92 and for side by side is 0.62, which prove the directivity and lower distortion of the signal. The proposed prototype is successfully simulated, fabricated, and measured.

In this contribution, fractal antenna arrays are analyzed for their applicability in multiple-input multiple-output (MIMO) radars. Array geometries based on the Fudgeflake fractal and the Gosper island fractal are investigated. In addition, a concept for the combination of both fractals is shown in order to increase the flexibility concerning the number of transmitting and receiving antennas. The presented fractal MIMO concepts can be utilized in order to improve the angular resolution and to reduce the sidelobe level for a given number of transmitting and receiving antennas. It is shown that a fractal MIMO concept with 21 transmitting antennas and 21 receiving antennas improves the angular resolution to 4.6 degrees and reduces side lobe level by 3.1 dB compared to a MIMO configuration based on two linear arrays with the same number of antenna elements. In addition, the results are experimentally validated by broadband radar measurements.

This paper proposes a unique, first of its kind fabrication technique for the making of textile antennas. A novel method that provides scope for automation in textile antenna production is presented here. A completely integrated textile antenna fabrication method that eliminates the tasks of positioning and fastening of the various components of a patch antenna is discussed. The technique employs multilayer weaving for the production of a wearable antenna on a cotton substrate. Silver yarn is used for the conductive regions of the textile antenna. Two layers of woven cotton serve to isolate the radiating patch from the ground plane of the antenna. The designed antenna was chosen to operate at the frequency of 2.45 GHz for Wireless Local Area Network. The built prototype resonated at 2.43 GHz with a |S11|of −18.62 dB. The integrated textile antenna exhibited a gain of 1.06 dBi at 2.43 GHz.