Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-22T07:20:43.807Z Has data issue: false hasContentIssue false
  • English
  • Français

Evaluation of GaN technology in Doherty power amplifier architectures

Published online by Cambridge University Press:  11 March 2010

Paolo Colantonio ,
Franco Giannini ,
Rocco Giofrè  and
Luca Piazzon
Paolo Colantonio
Affiliation:
Electronic Engineering Department, Università di Roma Tor Vergata – Via del Politecnico 1, 00133 Rome, Italy.
Franco Giannini
Affiliation:
Electronic Engineering Department, Università di Roma Tor Vergata – Via del Politecnico 1, 00133 Rome, Italy.
Rocco Giofrè*
Affiliation:
Electronic Engineering Department, Università di Roma Tor Vergata – Via del Politecnico 1, 00133 Rome, Italy.
Luca Piazzon
Affiliation:
Electronic Engineering Department, Università di Roma Tor Vergata – Via del Politecnico 1, 00133 Rome, Italy.
*
Corresponding author: R. Giofrè Email: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

The aim of the present paper is to highlight the possible benefits coming from the use of the GaN high electron-mobility transistor (HEMT) technology in the Doherty power amplifier (DPA) architecture. In particular, the attention is focused on the capabilities and the relevant drawbacks of a GaN HEMT technology when designing DPAs. A deep discussion of the DPA's design guidelines is also presented through the realization of three prototypes implementing different design solutions and working at 2.14 GHz. The first example is a tuned load DPA (TL-DPA), which show an average drain efficiency of 40.7% with 3 W of saturated output power in the obtained 6 dB of output back-off. The second DPA was designed implementing a class F harmonic termination for the main device, which allows an improvement of roughly 15% in output power and efficiency behavior with respect to the TL-DPA. The last DPA was realized implementing a single output matching network for both main and auxiliary devices, which allows a relevant reduction in the size of the resulting DPA, without downgrading the overall performances.

Keywords

Doherty amplifierGaNHigh efficiency
Type
Original Article
Information
International Journal of Microwave and Wireless Technologies , Volume 2 , Issue 1 , February 2010 , pp. 75 - 84
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Steer, M.: Beyond 3G. IEEE Microwave Mag., 8 (2007), 76–82.Google Scholar
[2]Raab, F.H. et al. : Power amplifiers and transmitters for RF and microwave. IEEE Trans. Microwave Theory Tech., 50 (3) (2002), 814–826.Google Scholar
[3]Colantonio, P.; Giannini, F.; Limiti, E.: High Efficiency RF and Microwave Solid State Power Amplifiers, John Wiley and Sons, New York, NY, 2009.Google Scholar
[4]Kennington, P.: High Linearity RF Amplifier Design, Artech House, Norwood, MA, 2000.Google Scholar
[5]Doherty, W.H.: A new high efficiency power amplifier for modulated waves. Proc. IRE, 24 (1936), 1163–1182.Google Scholar
[6]Colantonio, P.; Giannini, F.; Giofrè, R.; Piazzon, L.: Theory and experimental results of a class F AB-C Doherty power amplifier. IEEE Trans. Microwave Theory Tech., 57 (8) (2009), 1936–1947.CrossRefGoogle Scholar
[7]Mishra, U.K.; Shen, L.; Kazior, T.E.; Yi-Feng, W.: GaN-based RF power devices and amplifiers. Proc. IEEE, 96 (2) (2008), 287–305.CrossRefGoogle Scholar
[8]Trew, R.J.: SiC and GaN transistors – is there one winner for microwave power applications? Proc. IEEE, 90 (6) (2002), 1032–1047.CrossRefGoogle Scholar
[9]Mishra, U.K.; Parikh, P.; Wu, Y.-F.: AlGaN/GaN HEMTs – an overview of device operations and applications. Proc. IEEE, 90 (6) (2002), 1022–1031.CrossRefGoogle Scholar
[10]Peroni, M., et al. : Design, fabrication and characterization of Γ Gate GaN HEMT for high-frequency/wide-band applications, in Proc. 31st WOCSIDICE, Venice, Italy, May 20–23, 2007.Google Scholar
[11]Colantonio, P.; Giannini, F.; Giofrè, R.; Piazzon, L.: The AB-C Doherty amplifier, Part I: theory. Int. J. RF Microwave Comput. Aided Eng., 19 (3) (2009), 293–306.CrossRefGoogle Scholar
[12]Colantonio, P.; Giannini, F.; Giofrè, R.; Piazzon, L.: The AB-C Doherty amplifier, Part II: validation. Int. J. RF Microwave Comput. Aided Eng., 19 (3) (2009), 307–316.CrossRefGoogle Scholar
[13]Kim, J. et al. : Analysis of a fully matched saturated Doherty amplifier with excellent efficiency. IEEE Trans. MTT, 56 (2008), 328–338.CrossRefGoogle Scholar
[14]Sung-Chan, J.; Hammi, O.; Ghannouchi, F.M.: Design optimization and DPD linearization of GaN-based unsymmetrical doherty power amplifiers for 3G multicarrier applications. IEEE Trans. Microwave Theory Tech., 57 (9) (2009), 2105–2113.CrossRefGoogle Scholar
[15]Colantonio, P.; Giannini, F.; Giofrè, R.; Piacentini, M.; Piazzon, L.: A design approach to increase gain feature of a Doherty power amplifier, in Proc. 4th European Microwave Integrated Circuit Conf., EuMIC 2009, Rome, Italy, September 2009, 25–28.Google Scholar
[16]Cabral, P.M., Pedro, J.C., Carvalho, N.B.: Nonlinear device model of microwave power GaN HEMTs for high power-amplifier design. IEEE Trans. Microwave Theory Tech., 52 (11) (2004), 2585–2592.CrossRefGoogle Scholar
[17]Colantonio, P.; Giannini, F.; Leuzzi, G.; Limiti, E.: On the class-F power amplifier design. Int. J. RF Microwave Comput. Aided Eng., 9 (2) (1999), 129–149.Google Scholar
[18]Colantonio, P.; Giannini, F.; Giofrè, R.; Piazzon, L.: GaN Doherty amplifier with compact harmonic traps, in Proc. European Microwave Conf., EuMC 2008, Amsterdam, The Netherland, October 2008, 1553–1556.Google Scholar