Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-25T20:04:33.039Z Has data issue: false hasContentIssue false

Channel characterization of a dual-band dual-polarized SAR with digital beamforming

Published online by Cambridge University Press:  01 June 2020

Emilio Arnieri*
Affiliation:
DIMES, University of Calabria, Calabria, Italy
Luigi Boccia
Affiliation:
DIMES, University of Calabria, Calabria, Italy
Giandomenico Amendola
Affiliation:
DIMES, University of Calabria, Calabria, Italy
Srdjan Glisic
Affiliation:
Silicon Radar GmbH, 15236Frankfurt (Oder), Germany
Chun-Xu Mao
Affiliation:
University of Surrey, Guildford, SurreyGU2 7XH, United Kingdom School of Engineering and Digital Arts, University of Kent, Canterbury, UK
Steven (Shichang) Gao
Affiliation:
School of Engineering and Digital Arts, University of Kent, Canterbury, UK
Tobias Rommel
Affiliation:
Microwaves and Radar Institute, German Aerospace Center (DLR), 82234Wessling, Germany
Piotr Penkala
Affiliation:
Evatronix S.A. Bielsko-Biała, 43-300 Bielsko-Biała, Poland
Milos Krstic
Affiliation:
IHP-Leibniz-Institut für innovative Mikroelektronik, 15236Frankfurt (Oder), Germany University of Potsdam, 14482Potsdam, Germany
Uroschanit Yodprasit
Affiliation:
Silicon Radar GmbH, 15236Frankfurt (Oder), Germany
Anselm Ho
Affiliation:
Innovative Solutions In Space BV, 629 JD, Delft, Netherlands
Oliver Schrape
Affiliation:
IHP-Leibniz-Institut für innovative Mikroelektronik, 15236Frankfurt (Oder), Germany
Marwan Younis
Affiliation:
Microwaves and Radar Institute, German Aerospace Center (DLR), 82234Wessling, Germany
*
Author for correspondence: Emilio Arnieri, E-mail: [email protected]

Abstract

This paper presents the integration and channel characterization of a highly integrated dual-band digital beamforming space-borne synthetic aperture radar (SAR) receiver. The proposed SAR sensor is a low-cost, lightweight, low-power consumption, and dual-band (X/Ka) dual-polarized module ready for the next-generation space-borne SAR missions. In previous works, by the authors, the design and experimental characterization of each sub-system was already presented and discussed. This work expands upon the previous characterization by providing an exhaustive experimental assessment of the fully integrated system. As it will be shown, the proposed tests were used to validate all the instrument channels in a set-up where the SAR sensor was illuminated by an external source minim the ground reflected waves. Test results demonstrate how the system channels are properly operating allowing the reception of the input signals and their processing in the digital domain. The possibility to easily implement a calibration procedure has also been validated to equalize, in the digital domain, the unavoidable amplitude differences between the different channels.

Type
Research Paper
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2020

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Gebert, N, Krieger, G and Moreira, A (2009) Digital beamforming on receive: techniques and optimization strategies for high-resolution wide-swath SAR imaging. IEEE Transactions on Aerospace and Electronic Systems 45, 564592.CrossRefGoogle Scholar
Malviya, L, Panigrahi, RK and Kartikeyan, MV (2017) MIMO Antennas with diversity and mutual coupling reduction techniques: a review. International Journal of Microwave and Wireless Technologies 9, 17631780.CrossRefGoogle Scholar
Martin, M, Klupar, P, Kilberg, S and AFB, K (2001) Techsat 21 and Revolutionizing Space Missions Using Microsatellites. Proceedings of the 2001 Small Satellite Conference.Google Scholar
Massonnet, D (2001) Capabilities and limitations of the interferometric cartwheel. IEEE Transactions on Geoscience and Remote Sensing 39, 506520.CrossRefGoogle Scholar
Lee, PF and James, K (2001) The RADARSAT-2/3 topographic mission. in IGARSS 2001. Scanning the present and resolving the future. Proceedings of the IEEE 2001 International Geoscience and Remote Sensing Symposium (Cat. No.01CH37217), vol. 1, pp. 499–501.10.1109/IGARSS.2001.976202CrossRefGoogle Scholar
Arnieri, E, Boccia, L, Amendola, G, Glisic, S, Mao, C, Gao, S, Rommel, T, Penkala, P, Krstic, M, Yodprasity, U, Schrape, O and Younis, M (2019) Highly integrated dual-band dual-polarized antenna tile for SAR applications. In 2019 13th European Conference on Antennas and Propagation (EuCAP), pp. 1–4.Google Scholar
Arnieri, E, Boccia, L, Amendola, G, Glisic, S, Mao, C, Gao, S, Rommel, T, Penkala, P, Krstic, M, Yodprasit, U, Ho, A, Schrape, O and Younis, M (2019) An integrated radar tile for digital beamforming X-/Ka-band synthetic aperture radar instruments. IEEE Transactions on Microwave Theory and Techniques 67, 11971206.10.1109/TMTT.2018.2889038CrossRefGoogle Scholar
Gao, S, Qin, F, Mao, C, Patyuchenko, A, Younis, M, Krieger, G, Glisic, S, Debski, W, Boccia, L, Amendola, G, Arnieri, E, Krstic, M, Koczor, A, Penkala, P and Celton, E (2015) A Ka/X-band digital beamforming synthetic aperture radar for earth observation. In 2015 7th International Conference on Recent Advances in Space Technologies (RAST), pp. 681–686.10.1109/RAST.2015.7208429CrossRefGoogle Scholar
Huber, S, Younis, M and Krieger, G (2010) The TanDEM-X mission: overview and interferometric performance. International Journal of Microwave and Wireless Technologies 2, 379389.CrossRefGoogle Scholar
Rohrdantz, B, Jaschke, T, Gellersen, FKH, Sieganschin, A and Jacob, AF (2016) Ka-band antenna arrays with dual-frequency and dual-polarized patch elements. International Journal of Microwave and Wireless Technologies 8, 963972.CrossRefGoogle Scholar
Arnieri, E, Boccia, L and Amendola, G (2009) A Ka-band dual-frequency radiator for array applications. IEEE Antennas and Wireless Propagation Letters 8, 894897.CrossRefGoogle Scholar
Luo, Q, Gao, S, Chaloun, T, Menzel, W, Boccia, L, Arnieri, E, Amendola, G, Ziegler, (2013) Antenna array elements for Ka-band satellite communication on the move. Presentato al 2013 Loughborough Antennas and Propagation Conference, LAPC 2013, pp. 135–139.CrossRefGoogle Scholar
Greco, F, Boccia, L, Arnieri, E and Amendola, G (2019) K/Ka-band cylindrical reflector antenna for compact satellite earth terminals. IEEE Transactions on Antennas and Propagation 67, 56625667.10.1109/TAP.2019.2918440CrossRefGoogle Scholar
Mao, C-X, Gao, S, Tienda, C, Rommel, T, Patyuchenko, A, Younis, M, Boccia, L, Arnieri, E, Glisic, S, Yodprasit, U, Penkala, P, Krstic, M, Qin, F, Schrape, O, Koczor, A, Amendola, G and Petrovic, V (2017) X/Ka-band dual-polarized digital beamforming synthetic aperture radar. IEEE Transactions on Microwave Theory and Techniques 65, 44004407.CrossRefGoogle Scholar
Wu, D, Zhang, Y, Zhu, D, Wang, S and Shen, M (2019) A channel calibration algorithm based on isolated scatterers for multi-channel HRWSSAR. IEEE Access 7, 11. doi: 10.1109/ACCESS.2019.2941203.CrossRefGoogle Scholar
Biallawons, O, Klare, J and Saalmann, O (2014) Realization and calibration of the MIMO radar MIRA-CLE Ka. International Journal of Microwave and Wireless Technologies 6, 405413.10.1017/S175907871400049XCrossRefGoogle Scholar
Arnieri, E, Boccia, L, Amendola, G, Mao, C, Gao, S, Rommel, T, Glisic, S, Penkala, P, Krstic, M, Ho, A, Yodprasit, U, Schrape, O and Younis, M (2017) A 60-Channels ADC board for space borne DBF-SAR applications. In 2017 IEEE International Symposium on Antennas and Propagation USNC/URSI National Radio Science Meeting, pp. 211–212.CrossRefGoogle Scholar
Boccia, L, Emanuele, A, Arnieri, E, Shamsafar, A and Amendola, G (2012) Substrate integrated power combiners. Presentato al Proceedings of 6th European Conference on Antennas and Propagation, EuCAP 2012, pp. 3631–3634.10.1109/EuCAP.2012.6206405CrossRefGoogle Scholar