Anabaritids are a distinctive group of early skeletal fossils, with tri-radially symmetrical tubes. They occur in the earliest Cambrian deposits, and seem to be especially characteristic of the Tommotian strata and putative pre-Tommotian units (e.g. Manykay horizon). A detailed redescription of Anabarites rotundus Qian from near Kuanchuanpu, Shaanxi Province emphasizes the degree of morphological variation. New data on shell composition suggest a bilayered structure, the outer unit composed of fibres parallel to growth lines, overlying a distinctive inner lamella with a chevron ultrastructure. Tentative evidence for anabaritids possibly being operculate is presented, the putative operculum being a simple convex disc. More poorly preserved anabaritids from the Yangtze Gorges (Hubei Province) and Meishucun (Yunnan Province) are referred to A. trisulcatus. All these Chinese occurrences of anabaritids are consistent with a lower Tommotian age of the associated faunas, but reliable and precise correlations with other Precambrian-Cambrian boundary sections remain inconclusive.

Although many recent reviews emphasize a uniformity in granulite pressure–temperature (P–T) conditions and paths, granulites in reality preserve a spectrum of important petrogenetic features which indicate diversity in their modes of formation. A thorough survey of over 90 granulite terranes or occurrences reveals that over 50% of them record P–T conditions outside the 7.5 ± 1 kbar and 800 ± 50 °C average granulite regime preferred by many authors. In particular, an increasing number of very high temperature (900−1000 °C) terranes are being recognized, both on the basis of distinctive mineral assemblages and geothermobarometry. Petrogenetic grid and geothermobarometric approaches to the determination and interpretation of P–T histories are both evaluated within the context of reaction textures to demonstrate that the large range in P–T conditions is indeed real, and that both near-isothermal decompression (ITD) and near-isobaric cooling (IBC) P–T paths are important. Amphibolite–granulite transitions promoted by the passage of CO2-rich fluids, as observed in southern India and Sri Lanka, are exceptional and not representative of fluid-related processes in the majority of terranes. It is considered, on the contrary, that fluid-absent conditions are typical of most granulites at or near the time of their recorded thermal maxima.

ITD granulites are interpreted to have formed in crust thickened by collision, with magmatic additions being an important extra heat source. Erosion alone is not, however, considered to be the dominant post-collisional thinning process. Instead, the ITD paths are generated during more rapid thinning (1−2 mm/yr exposure) related to tectonic exhumation during moderate-rate or waning extension. IBC granulites may have formed in a variety of settings. Those which show anticlockwise P–T histories are interpreted to have formed in and beneath areas of voluminous magmatic accretion, with or without additional crustal extension. IBC granulites at shallow levels (< 5 kbar) may also be formed during extension of normal thickness crust, but deeper-level IBC requires more complex models. Many granulites exhibiting IBC at deep crustal levels may have formed in thickened crust which underwent very rapid (5 mm/yr) extensional thinning subsequent to collision. It is suggested that the preservation of IBC paths rather than ITD paths in many granulites is primarily related to the rate and timescale of extensional thinning of thickened crust, and that hybrid ITD to IBC paths should also be observed.

Most IBC granulites, and probably many ITD granulites, have not been exposed at the Earth's surface as a result of the tectonic episodes which produced them, but have resided in the middle and lower crust for long periods of time (100−2000 Ma) following these events. The eventual exhumation of most granulite terranes only occur through their incorporation in later tectonic and magmatic events unrelated to their formation.

Santorini volcanic field has had 12 major (1–10 km3 or more of magma), and numerous minor, explosive eruptions over the last ~ 200 ka. Deposits from these eruptions (Thera Pyroclastic Formation) are well exposed in caldera-wall successions up to 200 m thick. Each of the major eruptions began with a pumice-fall phase, and most culminated with emplacement of pyroclastic flows. Pyroclastic flows of at least six eruptions deposited proximal lag deposits exposed widely in the caldera wall. The lag deposits include coarse-grained lithic breccias (andesitic to rhyodacitic eruptions) and spatter agglomerates (andesitic eruptions only). Facies associations between lithic breccia, spatter agglomerate, and ignimbrite from the same eruption can be very complex. For some eruptions, lag deposits provide the only evidence for pyroclastic flows, because most of the ignimbrite is buried on the lower flanks of Santorini or under the sea. At least eight eruptions tapped compositionally heterogeneous magma chambers, producing deposits with a range of zoning patterns and compositional gaps. Three eruptions display a silicic–silicic + mafic–silicic zoning not previously reported. Four eruptions vented large volumes of dacitic or rhyodacitic pumice, and may account for 90% or more of all silicic magma discharged from Santorini. The Thera Pyroclastic Formation and coeval lavas record two major mafic-to-silicic cycles of Santorini volcanism. Each cycle commenced with explosive eruptions of andesite or dacite, accompanied by construction of composite shields and stratocones, and culminated in a pair of major dacitic or rhyodacitic eruptions. Sequences of scoria and ash deposits occur between most of the twelve major members and record repeated stratocone or shield construction following a large explosive eruption.

Volcanism at Santorini has focussed on a deep NE–SW basement fracture, which has acted as a pathway for magma ascent. At least four major explosive eruptions began at a vent complex on this fracture. Composite volcanoes constructed north of the fracture were dissected by at least three caldera-collapse events associated with the pyroclastic eruptions. Southern Santorini consists of pryoclastic ejecta draped over a pre-volcanic island and a ridge of early- to mid-Pleistocene volcanics. The southern half of the present-day caldera basin is a long-lived, essentially non-volcanic, depression, defined by topographic highs to the south and east, but deepened by subsidence associated with the main northern caldera complex, and is probably not a separate caldera.

Upper amphibolite facies dolomite and calcite marbles from the Dalradian Connemara Marble Formation of western Ireland display a wide range of textures when viewed in cathodoluminescence that are invisible in transmitted light. Examples observed include growth zones in calcite that appear to represent the infilling of a metamorphic secondary porosity, produced by the large reduction in solid volume accompanying growth of tremolite from dolomite and quartz. Retrograde phenomena are widespread, and include both carbonate pseudomorphs after tremolite and coarse veining, which is in optical continuity with peak metamorphic calcite but otherwise indistinguishable from it. Admixture of such widely differing calcite types may account for scatter in some stable isotope studies of marbles.

The position of the Iapetus Ocean suture can be traced between Ordovician fossil localities in the Southern Uplands and the Lake District which contain, respectively, distinct North American and European faunas. The Southern Uplands contains North American Caradoc faunas in the Northern Belt, and is considered to have been accreted onto the Laurentian (North American) margin between the Llandeilo and the end of the Wenlock. Deep seismic reflection profiling shows that a surface, probably parallel to the suture zone, dips down to the northwest from the Solway Line. In eastern Ireland, the surface trace of the suture coincides with the Navan Fault, which separates the Longford-Down massif from Ordovician sediments containing European faunas. The Navan–Silvermines Fault may represent the surface expression of the suture, but it is masked by Wenlock turbidites, which appear to have crossed over the plate boundary. Northward subduction of continental crust below the margin of Laurentia during the late Silurian may explain the influx of turbidite fans from the north or north west onto depressed crust to the south of the suture. Termination of subduction coincides with the widespread Acadian Orogeny in the Emsian (at 395±5 Ma).

The late Carboniferous to Triassic Karoo Supergroup of Madagascar is a sequence of predominantly continental clastic sediments deposited during a long period of regional crustal extension. In the Morondava Basin of western Madagascar the lower two divisions of the Karoo sediments – the Sakoa and the Sakamena – are deposits of fluvial and lacustrine sedimentation systems supplied from the Precambrian metamorphic basement terrain to the east. East–west crustal extension produced a series of graben and half-graben structures after the Sakoa period which were reactivated after the Sakamena. The position and orientation of these half graben, which were marginal to a larger rift system to the west, were partly controlled by the steep NNE–SSW mylonitic fabric in the metamorphic basement. Palaeocurrents in the braided river deposits of the Sakoa and Lower Sakamena indicate flow to the southwest and west in both sequences. The rivers followed a regional palaeoslope to the southwest/west and were apparently not significantly influenced by the local structural trends which were oriented perpendicular to this slope. The absence of local structural control is attributed to extensive erosional events which followed each tectonic episode and preceded the onset of further sedimentation which took place on an essentially peneplained surface. The tectonic episodes brought about changes in base level which caused this part of the basin to fluctuate between erosion and deposition.

Archaean komatiite volcanics at Kambalda, Western Australia have been metamorphosed to upper greenschist–lower amphibolite grade and have experienced intense though heterogeneously developed polyphase deformation. Despite this, preservation of igneous textural features is often good, particularly in areas which underwent only ‘static style’ metamorphism. Thin lavas from the Tripod Hill Member of the Kambalda Komatiite Formation over the western margin of the Hunt nickel shoot display textural elements and facies variations which are virtually identical to those found in fresher thin komatiite sequences in other Archaean greenstone belts. Four principal flow profile (facies) types are defined, comprising nine subtypes. These represent stages in a facies continuum, ranging from ‘mature’ profiles which comprise thick spinifex textured tops and close packed cumulate bases through to massive, jointed ‘immature’ profiles devoid of mesoscopic spinifex texture. The causes of textural diversity within and between profiles are many and complex. However, facies variations can be attributed mainly to the effects of lava velocity at the time of major heat loss, combined with relative lateral position within any flow. The most mature textural (and geochemical) profiles developed in parts of lavas which had become ponded prior to major heat loss, whereas the least evolved profiles developed along the lateral margins (levees) of moving lavas. The study area komatiites occur as alternating stacks of flows of similar type. This stratigraphy records temporal and spatial shifts in the locus of lava ponding over the western margin of the Hunt nickel shoot. Such shifts may have been caused by irregularities in the underlying volcanic topography and/or by synvolcanic faulting and subsidence.

We have investigated the reaction between crystalline amphibolite and hydrous granite melt in static experiments at 810 °C and 1.5 kbar. Boundary layer concentration gradients in quenched silicate glass for the major element oxides and the volatile components, water and carbon dioxide, were measured using electron probe analysis and Fourier Transform Infrared Spectroscopy, respectively. We found a measurable change in the concentration of all components adjacent to the amphibolite in experiments of 66 and 330 hours duration. After I hour there was no detectable change in the concentration of major element oxides in the granitic glass, but steep concentration profiles were determined for carbon dioxide and water. A bubble-free zone developed adjacent to the amphibolite in the 66 hour experiment, and this zone increased in width after 330 hours. Reaction is controlled by dissolution of amphibolite and by transport of dissolved material through the granite melt. The rate-controlling process is chemical diffusion in the melt phase. Results confirm that in the absence of convective heat transfer and/or mechanical disaggregation of mafic inclusions, assimilation of mafic rocks by granite melt is very slow, corresponding to on the order of 10 mm for SiO2 in 1000 years.

Two internal discontinuities are described from the Tertiary, Shiant Isles sill (northwest Scotland). The lower discontinuity separates picrite from overlying picrodolerite and the recently discovered upper discontinuity separates picrite from underlying crinanite. The sill is thus divided into an inner, strongly differentiated, picrodolerite–crinanite unit and outer picritic units. The lower discontinuity is slightly transgressive with respect to the picrite. The discontinuities are interpreted as the contacts between an earlier-intruded picritic sill (about 30 m thick) and a slightly later-intruded, much thicker, crinanitic sill. The Shiant Isles main sill is therefore a multiple intrusion.

The early Ordovician was a time of maximum continental separation and hence a time when faunal evidence can be used to assess palaeogeography in a critical way. We summarize the known trilobite occurrences (18 genera) from the Arenig–Llanvirn of the Lake District, and record some genera for the first time. Maps of the distribution of some of these forms are given. All genera except Cyclopyge were confined to the Gondwana continent at the time, and some are known from many localities; and two species are widespread in England, Wales, France, Iberia and Bohemia. The fauna is entirely distinct from those of Scandinavia and North America. All the palaeontological evidence points to the Lake District being adjacent to Ordovician Gondwana. In the earlier Ordovician it is not reasonable to suggest that the Iapetus Ocean lay to the south of the Lake District as did Allen (1987).

Carbonate-rich glacial deposits from two discrete Vendian glacial periods are described. The older is represented by the 24–40 m thick Petrovbreen Member (E2) of the Elbobreen Formation which contains abundant detrital dolomite. Clasts in E2 and their possible source rocks have positive δ13C and negative δ18OPDB values. In contrast the carbonate mud-fraction of E2 sediments has different cathodoluminescence characteristics from clasts, slightly negative δ13C values, and higher Fe and Mn concentrations than clasts. Oxygen isotopes vary from −2.5 to +4.5‰PDB, thought to be related to various seawater–meltwater mixtures in the depositional environment. Preservation of information about glacial sedimentary environments is attributed to early diagenetic recrystallization forced by excess surface free energy (Ostwald's ripening) and coinciding with sulphate reduction.

The younger glaciation is represented by the Wilsonbreen Formation (170 m) which has a distinctive glaciolacustrine Middle Carbonate Member (W2). W2 contains precipitated periglacial carbonates (with high Mn/Fe ratio): both limestone (rhythmitic and stromatolitic) and dolostone (rhythmites, stromatolites and dolomite-rich sandstones) which are compared with carbonates in modern Antarctic lakes. Evaporitic environments for dolomitic sandstones and stromatolitic dolostones are indicated by heavy oxygen isotope values (up to + 10.5‰PDB), high Na concentration and evidence for dissolved evaporites. High Mn concentration in detrital dolostones in W2 is suggestive of syn-sedimentary dolomite recrystallization in freshwater diamictites and haematitic siltstones.

The carbonate–tillite association ultimately arises from the erosion of underlying carbonates which originated (in this case) under radically different climatic conditions. Glacial depositional waters then became carbonate-saturated as a result of dissolution of detrital carbonate. Massive recrystallization of glacially transported carbonate is proposed as a geologically significant process with considerable potential for palaeoenvironmental analysis. In glacial lakes carbonate precipitated in response to evaporation or photosynthesis. Carbonate precipitation as the result of seawater freezing, or in warm interglacial conditions, is not yet established. Oxygen isotope value are inconsistent (too heavy) with the presence of high-latitude meltwaters, implying that glaciation extended to low latitudes as proposed by Harland.

Using examples from the Gulf of Suez and southeastern France, the distribution of tension tectonic joints as well as shear tectonic joints in continuous profiles is shown to fit a Gamma distribution. The parameters of this distribution are determined using the maximum likelihood method. Apparent fit with negative exponential distribution in photointerpretation analysis results from lack of resolution. The average joint spacing is directly proportional to bed thickness; it decreases when the degree of rock consolidation increases.

Time-level plots represent changes of level of sediment surfaces over one, or more, episodes. The durations of the episodes must be specified, because they can vary over many orders of magnitude in different studies. This study is concerned with the relationships between sedimentological episodes, resulting in deposition or erosion of beds, centimetres to metres thick, and stratigraphic episodes resulting in deposition of tens to hundreds of metres. The object of this work is to develop a method of analysing patterns of sedimentological episodes which will allow the examination of their relationship with the stratigraphic rates of accumulation that reflect tectonic and/or climatic controls.

The method plots the sedimentological episodes as a sequence of small time-level vectors, plotted head to tail. The resultant of this vector sequence is the large vector that represents the net change of level over the whole stratigraphic time episode. The gradient of this large vector is the rate of stratigraphic accumulation.

The Chinji Formation (Miocene), Siwalik Group, Pakistan, is a fluvial unit, whose major channel sandstones occur between intervals of floodplain overbank mudstones with minor sandstones. Using time-level plots, interpretation of a 36 m interval from the formation is progressively improved in the light of our growing understanding of the surface processes. Having first outlined a simple first timelevel plot, the following modifications are introduced, and their time and rate significance can be assessed from new plots: (1) thick mudstone episodes are replaced by many thinner episodes; (2) long episodes of hiatus are removed unless marked by distinct soils; (3) episodes are inserted below the sandstones.

High concentrations of vanadium, molybdenum, uranium, arsenic, antimony with low concentrations of manganese, iron and cobalt heretofore restricted to Dictyonema flabelliforme-bearing Tremadoc black shales in Balto-Scandia, have been found in coeval black shales in the Saint John, New Brunswick area. Prior palaeogeographic reconstructions place these areas about 400 km. apart in high southern latitudes in the Iapetus Ocean, with New Brunswick in proximity to Avalonia (southeastern Newfoundland). These geochemical similarities are not found in coeval Tremadoc black shales of Bolivia, New York, Quebec, Wales, and Belgium. Palaeo-oceanographic reconstructions of Iapetus support the proximity of Balto-Scandia and the Saint John area during the early Tremadoc and Gee'sx (1981) suggestion that the signature is a feature of eastern Iapetus. Furthermore, first-order modelling of the major surface currents and related primary productivity in the Tremadoc Iapetus Ocean explain the apparent wide latitudinal range of D. flabelliforme (Fortey, 1984) and the anomalous trace metal content of certain black shales of that time. Variations in the elemental content of these black shales is produced by oceanographic and geologic conditions unique to the geographic site. The distinctive Balto-Scandic geochemical signature resulted from the coincidence of anoxic waters transgressing the shelf at latitudes of high organic productivity at the polar Ekman planetary divergence. This produces the conditions for concentrations of V, U, and Mo in the shales. Metal enriched anoxic bottom waters produced by leaching of volcanics or through hydrothermal activity may be the source of the other enhanced signature elements such as As and Sb. The absence of this geochemical signature in younger non-D. flabelliforme Tremadoc and later black shales in Balto-Scandia and other areas suggests that the closing of Iapetus moved the depositional sites into less productive oceanic areas.

Selected trace fossils from the type section of the ‘Etcheminian Series’ at Hanford Brook are described and illustrated: Helmithoidichnites tenuis Fitch, Monocraterion sp., Palaeophycus tubularis Hall, Planolites sp., Psammichnites gigas Matthew, Subphyllochordra? sp., Taphrhelminthoida dailyi n. sp., and Taphrhelminthopsis cf. T. circularis Crimes et al. The assemblage has elements comparable to those in other Lower Cambrian sequences. It formed in shallow water settings, is mainly endichnial, and contains systematic, guided meander traces that are generally characteristic of deep-water environments in younger sequences; this may be related to global environmental changes early in the Palaeozoic. The guided meander traces are characterized morphometrically, using an image analyser: the meander systems exhibit a strongly bimodal distribution of morphologic elements, reflecting a well developed taxis (sense for position, direction, and distance) during trace production. The method of morphometric analysis has potential for characterizing trace fossils generally, somewhat like X-ray diffractograms characterize minerals.

B1 subdivisions are narrow foliated zones of stubby, skeletal olivine blades, situated at the top of the granular olivine cumulates (B2) in ponded komatiite lavas. They developed at a late stage in pond crystallization as a result of compaction-related circulation of intercumulus liquids through and along the top of the cumulates. The total thickness of a B1 and its degree of blade parallelism are related to lateral position within ponded lavas. The deeper, hotter and longer-lived core regions generated a thick B1 with a high degree of blade parallelism (ordered B1), whereas the shallower, peripheral regions produced a narrow B1 with a poor degree of blade parallelism (disordered B1), or failed to develop one at all.

The Adola Fold and Thrust Belt of Ethiopia is a late- Precambrian, north–south trending belt of volcanic-sedimentary and ophiolite–like units overlying ‘basement rocks’ (gneisses and granitic gneisses). Detailed structural analysis and data from microfabrics have documented two thrusting events (D1, D5) and three folding phases (F2, F3, F4). All deformations have affected both the rocks of the Adola Fold and Thrust Belt and the ‘older basement’. The structural history is recorded as follows: (1) formation of ductile shear zones (Dl); (2) progressive development of recumbent folds (F2); (3) a superimposed north-south trending, tight to isoclinal, upright penetrative folding phase (F3), which imparted the dominant structure of the region; (4) F3 was later gently affected, at right angles to F3, by the last folding event (F4). Metamorphic conditions during this deformational cycle reached highest greenschist to medium amphibolite facies conditions. Close to major thrust contacts imbrication produced metamorphic discontinuities. Marked retrograde metamorphism in narrow horizons indicates a continuation of minor movements along the major thrusts, postdating the metamorphic peak. Evidence of a second thrusting/faulting episode (D5) is only recorded at the mesoscale. This latter event was accompanied by very low to low grade metamorphic conditions. In accepting the previously reported age of 1030±40 Ma for the volcanic–sedimentary unit of the Adola Fold and Thrust Belt, and the interpretation of these units as an immature island arc, a possibly early Pan-African oceanic accretion is postulated.

On mainland North Wales basement rocks emerge from beneath a Lower Ordovician cover along the west side of the Llyn peninsula. The basement contains steeply dipping mylonites (Llŷn shear zone) that separate plutonic and gneissic rocks (Sarn Complex) from a melange (Gwna mélange). The western edge of the Ordovician outcrop follows the basement shear zone, and new trenching data confirm that only a faulted relationship exists between cover and basement along this northwestern extremity of the Welsh Basin. Deformation along this margin has propagated into the Arenig cover to produce southeasterly verging thrusts, asymmetric folds and northwesterly dipping cleavage. A prominent steep fault (Daron Fault) cutting the Ordovician succession follows an eastern splay of the Llŷn shear zone and again therefore records brittle reactivation of an underlying mylonite belt. The likelihood of syn-Arenig fault movements is provided by the presence of a prominent late Arenig coarse clastic unit, containing boulders of the basement mylonites, that is found only to the west of the Daron Fault. Steep basement structures such as the Llŷn shear zone, initially generated as major transcurrent faults, are interpreted as having exerted a strong control over the deposition and subsequent deformation of the Ordovician cover sequence.

Strike, dip, and thickness were measured for 504 sheets (inclined sheets and dykes) in the 4–6 Ma old Hafnarfjall central volcano in southwest Iceland. The average dip of sheets is 65°, 80% are less than 1.2 m thick, and the thickness tends to decrease with decreasing dip. In 0.5 km long traverses perpendicular to the average strike of sheets, the percentage of sheets ranges from about 6 to 11.

Of 140 chemically analysed sheets most are quartz-tholeiites; a few are intermediate or acid. The sheets are chemically more evolved than the host rock and were generated by a shallow crustal magma chamber at a mature stage of the central volcano, whereas the host rock was generated earlier before the chamber was established. Trace element results suggest that the sheet magmas evolved by low-pressure fractional crystallization as well as by mixing of primitive magmas and crustal melts.

A model is proposed where most of the sheets are generated by a growing shallow magma chamber. As the chamber grows its shape changes, and so does the local stress field associated with it. Because the sheets follow the stress trajectories of the local stress field, the potential pathways of the sheets change with the growth of the chamber, which may explain the common occurrence of cross-cutting sheets. From the evolved chemistry of the sheets, as well as from the pattern of the stress trajectories, it is concluded that the bulk of the sheets were injected from the upper part of the shallow magma chamber.