The large magnetic anomaly which runs along the Highland Boundary Fault of Scotland immediately to the NW of Blairgowrie has been studied by both a ground-based magnetic survey and a palaeomagnetic investigation. A newly developed optimisation program, making use of a simplex algorithm, was used to model the long wavelength component of this effectively two-dimensional anomaly. The consequent model consists of a vertical, rectangular body, 3 km wide and 13 km deep, whose top surface is 2 km below ground level, with a magnetisation directed vertically downwards. The composition of this body is most likely to be that of an ultra-basic, metamorphic complex which has been brought up to its present position between two of the many near-vertical faults in the area. The medium wavelength structure of the anomaly was modelled using the common technique of trial and error, and can be interpreted in terms of a pair of Devonian andesitic lavas and a small extension of the main ultrabasic block. Subsequent palaeomagnetic remanence measurements confirmed that the magnetisation of the two lavas recorded a Devonian polarity reversal. The magnetisation of the ultrabasics is directed vertically downwards, exactly as deduced from the earlier modelling work.

The fossil ricinuleids are described, and their systematic relationships revised, based on a study of all British and American specimens. Phylogenetic analysis, utilising a new character set, indicates a probable basal dichotomy between the fossil and extant forms. The order is divided into two new suborders: Neoricinulei subordo, nov., for the extant genera, and Palaeoricinulei subordo. nov., for the fossil forms. Two new genera are erected: Amarixys gen. nov. for Curculioides gracilis (Petrunkevitch, 1945) and A. stellaris sp. nov., and Terpsicroton gen. nov. for Poliochera alticeps Pocock, 1911. Three new species are erected in the genus Curculioides: C. mcluckiei sp. nov., C. pococki sp. nov., and C. gigas sp. nov., and one in the genus Poliochera: P. gibbsi, sp. nov.

The Miocene Baltoro granite forms a massive plutonic unit within the Karakoram batholith, and is composed of comagmatic monzogranites and leucogranites with a mineralogy consisting of quartz-K-feldspar-plagioclase-biotite ± muscovite ± garnet, with accessory sphene, zircon, monazite and opaques. Geochemically the Baltoro granites are mildly peraluminous, and show a calc-alkaline trend on trace-element normalised diagrams with high LIL/HFS element ratios and negative Nb, P and Ti anomalies. REE are strongly fractionated with little or no Eu anomaly. Leucogranites are depleted in most elements compared to monzogranites with notable exceptions being Rb, K and the HREEs. Initial 87Sr/86Sr ratios are 0·7072-0·7128, considerably lower than High Himalayan leucogranites (0·74-0·79), and are indicative of a lower continental crust source. The probable petrogenesis of the Baltoro granite involves dehydration melting of a biotite-rich pelite to produce a voluminous, hot, water-undersaturated magma which could then separate from its source and intrude through an already thickened and still hot crust. Fractional crystallisation of the monzogranites produced the leucogranites and a pegmatite dyke swarm. A suite of lamprophyre dykes including amphibolerich vogesites and biotite-rich minettes intrude the country rock, dominantly to the north, around the Baltoro granite. These calc-alkaline shoshonitic lamprophyres are volatile-rich mantle-derived melts intruded around the same time as the granite, indicating simultaneous melting of the mantle and lower crust beneath the Karakoram during the Miocene, approximately 30 Ma after the India-Asia collision which initially caused the crustal thickening. Intrusion of mantle melts provided heat to promote crustal melting and may have selectively contaminated the granite magma.

The Baltoro granite intrudes sillimanite gneisses with melt pods along the southern margin indicating temperatures above 700°C at the time of intrusion. Locally, internal fabrics and numerous aligned xenoliths along the southern margin in the Biafo glacier region indicate steep, southward-directed thrusting during emplacement. Along the northern contact, the Baltoro granite intrudes anchimetamorphic to greenschist facies metasedimentary rocks with an andalusite-bearing contact aureole. Northward-directed culmination collapse normal faulting during Miocene emplacement is inferred, in order to explain the P-T differences either side of the pluton. This also provided an extensional stress regime in the upper crust to accommodate the rising magma.

The ultrabasic rocks of the southern portion of the Early Tertiary Cuillin Igneous Complex, Isle of Skye, are recognised as forming a Peridotite Series s.l. and have been separated into six distinct structural–lithological units. These units range from almost pure dunite (Unit 1, at the lowest structural level), through to feldspathic peridotites and allivalites (Units 5 and 6, at the highest structural levels). Detailed field and mineralogical studies indicate that both cumulus and postcumulus processes involving ultrabasic (picritic) magmas may be identified, and that the latter processes have significantly modified many of the primary features of these rocks.

Layering, both modal and phase, is present within all six units, although it is more prominent within the higher units, especially Units 5 and 6. Differing orientations of fabrics defined by cumulus spinel and intercumulus plagioclase layers within Unit 3 indicate the important role of compaction and intercumulus melt migration. Unit 4 is extremely heterogeneous, involving material ranging in composition from peridotite to allivalite, and provides clear evidence for postcumulus melt movement, magma-mixing, disruption and brecciation. Units 5 and 6 developed with a more porous cumulus framework, giving rise to dendritic growths involving cumulus olivine and poikilitic plagioclase.

It is concluded that postcumulus melt movement, injection and magma-mixing, involving ultrabasic magmas, were significant processes in the formation of the ultrabasic rocks of the Cuillin Igneous Complex.

Granites and related volcanic rocks of the Lachlan Fold Belt can be grouped into suites using chemical and petrographic data. The distinctive characteristics of suites reflect source-rock features. The first-order subdivision within the suites is between those derived from igneous and from sedimentary source rocks, the I- and S-types. Differences between the two types of source rocks and their derived granites are due to the sedimentary source material having been previously weathered at the Earth's surface. Chemically, the S-type granites are lower in Na, Ca, Sr and Fe3+/Fe2+, and higher in Cr and Ni. As a consequence, the S-types are always peraluminous and contain Al-rich minerals. A little over 50% of the I-type granites are metaluminous and these more mafic rocks contain hornblende. In the absence of associated mafic rocks, the more felsic and slightly peraluminous I-type granites may be difficult to distinguish from felsic S-type granites. This overlap in composition is to be expected and results from the restricted chemical composition of the lowest temperature felsic melts. The compositions of more mafic I- and S-type granites diverge, as a result of the incorporation of more mafic components from the source, either as restite or a component of higher temperature melt. There is no overlap in composition between the most mafic I- and S-type granites, whose compositions are closest to those of their respective source rocks. Likewise, the enclaves present in the more mafic granites have compositions reflecting those of their host rocks, and probably in most cases, the source rocks.

S-type granites have higher δ18O values and more evolved Sr and Nd isotopic compositions, although the radiogenic isotope compositions overlap with I-types. Although the isotopic compositions lie close to a mixing curve, it is thought that the amount of mixing in the source rocks was restricted, and occurred prior to partial melting. I-type granites are thought to have been derived from deep crust formed by underplating and thus are infracrustal, in contrast to the supracrustal S-type source rocks.

Crystallisation of feldspars from felsic granite melts leads to distinctive changes in the trace element compositions of more evolved I- and S-type granites. Most notably, P increases in abundance with fractionation of crystals from the more strongly peraluminous S-type felsic melts, while it decreases in abundance in the analogous, but weakly peraluminous, I-type melts.

Blocks of medium-grained granodiorite to 4 m, and minor diabase, quartz diorite, granite, aplite and granophyre, are common in ejecta of the ∼6,900 yrBP calderaforming eruption of Mount Mazama. The blocks show degrees of melting from 0–50 vol%. Because very few have adhering juvenile magma, it is thought that the blocks are fragments of the Holocene magma chamber's walls. Primary crystallisation of granodiorite produced phenocrystic pl + hyp + aug + mt + il + ap + zc, followed by qz + hb + bt + alkali feldspar (af). Presence of fluid inclusions in all samples implies complete crystallisation before melting. Subsolidus exchange with meteoric hydrothermal fluids before melting is evident in δ18O values of −3·4+4·9‰ for quartz and plagioclase in partially melted granodiorites (fresh lavas from the region have δ18O values of +5·8−+7·0‰); δ18O values of unmelted granodiorites from preclimatic eruptive units suggest hydrothermal exchange began between ∼70 and 24 ka. Before eruption, the granitic rocks equilibrated at temperatures, estimated from Fe-Ti oxide compositions, of up to ∼1000°C for c. 102–104 years at a minimum pressure of 100-180 MPa. Heating caused progressive breakdown or dissolution of hb, af, bt, and qz, so that samples with the highest melt fractions have residual pl + qz and new or re-equilibrated af + hyp + aug + mt + il in high-silica rhyolitic glass (75-77% SiO2). Mineral compositions vary systematically with increasing temperature. Hornblende is absent in rocks with Fe-Ti oxide temperatures >870°C, and bt above 970°C. Oxygen isotope fractionation between qz, pl, and glass in partially fused granodiorite also is consistent with equilibration at T≥900°C (Δ18Oqz.pl = +0·7 ± 0·5‰). Element partitioning between glass and crystals reflects the large fraction of refractory pl, re-equilibration of af and isolation or incomplete dissolution of accessory phases. Ba and REE contents of analysed glass separates can be successfully modelled by observed degrees of partial melting of granodiorite, but Rb, Sr and Sc concentrations cannot. Several samples have veins of microlite-free glass 1–5 mm thick that are compositionally and physically continuous with intergranular melt and which apparently formed after the climactic eruption began. Whole-rock H2O content, microprobe glass analysis sums near 100% and evidence for high temperature suggest liquids in the hotter samples were nearly anhydrous. The occurrence of similar granodiorite blocks at all azimuths around the 8 × 10 km caldera implies derivation from one pluton. Compositional similarity between granodiorite and pre-Mazama rhyodacites suggests that the pluton may have crystallised as recently as 0·4 Ma; compositional data preclude crystallisation from the Holocene chamber. The history of crystallisation, hydrothermal alteration, and remelting of the granitic rocks may be characteristic of shallow igneous systems in which the balance between hydrothermal cooling and magmatic input changes repeatedly over intervals of 104-106 years.

Agnostid trilobites are described from the Lower Ordovician (Oelandian Series) of Öland, Östergötland, Västergötland and Närke, southern Sweden. In addition, a few agnostids are described from the Ceratopyge Limestone (upper Tremadoc) of Scania (Skåne), the southernmost province of Sweden. 24 species (of which Galbagnostus nericiensis is new), assigned to four genera, are described or discussed. Species of Geragnostus and Arthrorhachis dominate numerically. Also recorded locally are species of Galbagnostus and Leiagnostus. Most species have a markedly restricted vertical distribution, and many species appear to have a sufficiently short range to be of value in stage- and zone-level correlation. Agnostids are represented almost throughout the Lower Ordovician of southern Sweden, but they have not been recorded from the Tremadocian “Dictyonema” and Ceratopyge Shales, nor from the upper Holen Limestone (upper Kundan Stage). In the Ordovician of Baltoscandia, agnostids are largely restricted to the Central Baltoscandian Confacies Belt; they are very rare or absent in the adjacent belts to the east and in the graptolitic shales of the Scanian Confacies Belt.

Two detailed sections through 4 km of distal alluvium of the Upper Devonian Old Red Sandstone in the Munster Basin, southern Ireland, display a limited number of lithofacies. There is little ordering of these lithofacies on a small scale but changes in the proportions of lithofacies through time define a sequence of stages of basin evolution. The depositional environments changed progressively from sheetflood dominant, via mobile ephemeral channels and floodplains to a more fixed channel–overbank system and eventually to a coastal plain. On the basis of the sedimentary record a progressive reduction in subsidence rate with time is deduced as the main control on the evolution of the basin fill. This deduction is consistent with predictions from previously applied extensional basin models, but is insufficiently refined at present to distinguish between the different models.

Faunas of disarticulated ossicles, particularly columnals, are a potentially important source of data for helping to elucidate the patterns of evolution and extinction shown by pelmatozoans in the late Ordovician. The columnal fauna of the Hirnantian High Mains Formation, Craighead Inlier, Strathclyde, includes the following morphotaxa: Cyclocyclicus (col.) foraminosus sp. nov.; Cyclocyclicus (col.) periogmos sp. nov.; Hypsinomocrinus (col.) lewisi gen. et sp. nov.; Tetragonotetragonalis (col.) girvanensis sp. nov.; and Pentagonopentagonalis (col.) sp. This is the first Hirnantian columnal fauna to be described from the North American province; it is distinctly different from Hirnantian columnal biota described from Wales and Kazakhstan.

The Notre Dame and Exploits subzones of Newfoundland's Dunnage Zone are correlated with the Midland Valley and Southern Uplands of Scotland, using detailed comparisons of two key Lower Palaeozoic successions which record similar histories of extension and compression. It follows that the Baie Verte Line, Red Indian Line and Dover Fault are equivalent to the Highland Boundary Fault, Southern Upland Fault and Solway Line, respectively.

The Betts Cove Complex and overlying Snooks Arm Group of the Notre Dame Subzone are analogous to the Ballantrae Complex of the Midland Valley, both recording the Arenig evolution and subsequent obduction of an arc and back-arc system. The Early Ordovician to Silurian sequence unconformably overlying the Ballantrae Complex is poorly represented in the Notre Dame Subzone but important similarities can still be detected suggesting corresponding histories of continental margin subsidence and marine transgression.

In the Exploits Subzone, Early Ordovician back-arc volcanic rocks are overlain by Llandeilo mudstones and Late Ordovician to Early Silurian turbidites. A similar stratigraphy occurs in the Northern and Central Belts of the Southern Uplands and both areas have matching transpressive structural histories. Deeper erosion in the Exploits Subzone reveals Cambrian and Early Ordovician volcano-sedimentary sequences structurally emplaced on the Gander Zone, and such rocks are probably present beneath the Southern Uplands. Combined data from the Notre Dame Subzone and Midland Valley suggest an Arenig southeast-dipping subduction zone. Early Ordovician volcanic rocks in the Exploits Subzone and Southern Uplands have back-arc basin geochemistry and support the model of the Southern Uplands as a transition from back-arc to foreland basin. Preferential emergence of the Dunnage Zone and contrasts between Exploits Subzone and Southern Uplands turbidite basins are attributed to collision of Newfoundland with a Laurentian promontory and Scotland with a re-entrant. This hypothesis also explains the transpressive structural regime common to both areas.

Like many granites, the Late Cretaceous intrusives of the eastern Mojave Desert, California, have heretofore provided useful but poorly focused images of their source regions. New studies of lower crustal xenoliths and inherited accessory minerals are sharpening these images.

Xenoliths in Tertiary dykes in this region are the residues of an extensive partial melting event. Great diversity in their composition reflects initial heterogeneity (both igneous and sedimentary protoliths) and varying amounts of melt extraction (from <10% to >70%). Mineral assemblages and thermobarometry suggest that the melting event occurred at T ≥ 750°C at a depth of about 40 km. Present-day Sr, Nd, and Pb isotopic ratios indicate a Mojave Proterozoic heritage, but unrealistic model ages demonstrate the late Phanerozoic adjustment of parent/daughter ratios. A link between these xenoliths and the Late Cretaceous granites, though not fully documented, is probable; in any case, they provide invaluable clues concerning a crustal melting event, recording information about nature of source material (heterogeneous, supracrustal-rich), conditions of melting (moderately deep, moderately high T, accompanied by partial dehydration), and melt extraction (highly variable, locally extensive).

The Old Woman-Piute granites contain a large fraction of inherited zircon and monazite. A SHRIMP ion probe investigation shows that these zircons record a Proterozoic history similar to that which affected the Mojave region. Zonation patterns in zircons, and to a lesser extent monazites and xenotimes, document multiple phases of igneous, metamorphic, and sedimentary growth and degradation, commonly several in a single grain. Low Y in portions of the cores of inherited zircons and monazites and in monazites and outer portions of zircons from the xenoliths appear to indicate growth in equilibrium with abundant garnet.

Fluid dynamic modelling of crystallising calc-alkalic magma bodies has predicted that differentiated liquids will ascend as boundary layers and that accumulation of these buoyant liquids near chamber roofs will result in compositionally stratified magma chambers. This paper reports physical features in La Gloria Pluton that can be interpreted as trapped ascending differentiated liquids. Leucogranitic layers decimetres thick, which are locally stratified, are trapped beneath overhanging wall contacts. The same felsic magmas were also preserved where they were injected into the wall rocks as dykes and as large sill complexes. These rocks do not represent differentiated magmas produced by crystallisation along the exposed walls because the felsic layers occur at the wall rock contact, not inboard of it. Rather, we speculate that evolved felsic liquids are generated by crystallisation all across the deep levels of chambers and that initial melt segregation occurs by flowage of melt into tension fractures. Melt bodies so formed may be large enough to have significant ascent velocities as diapirs and/or dykes. The other way in which the leucogranite occurrence is at variance with the convective fractionation model is that the ascending liquids did not feed a highly differentiated cap to the chamber, as the composition at the roof, although the most felsic in this vertically and concentrically zoned pluton, is considerably more mafic than the trapped leucogranitic liquids. This suggests that these evolved liquids were usually mixed back into the main body of the chamber. Backmixing may be general in continental-margin calc-alkalic magmatic systems, which, in contrast to those in intracontinental settings, rarely produce volcanic rocks more silicic than rhyodacite. That the highly differentiated liquids are preserved at all at La Gloria is a result of the unusual stepped nature of the contact and the entirely passive mode of emplacement of the pluton, which, in contrast to ballooning in place, does not result in wall zones being “scoured”.

Cretaceous and Cainozoic granites and rhyolites in the northwestern U.S.A. provide a record of silicic magmatism related to diverse tectonic settings and large-scale variations in crustal structure. The Late Cretaceous Idaho Batholith is a tonalitic to granitic Cordilleran batholith that was produced during plate convergence. Rocks of the batholith tend to be sodic (Na2O > K2O), with fractionated HREE, negligible Eu anomalies, and high Sr contents, suggesting their generation from relatively mafic sources at a depth sufficient to stabilise garnet. In contrast, Neogene rhyolites of the Snake River Plain, which erupted in an extensional environment, are potassic (K2O > Na2O), with unfractionated HREE patterns, negative Eu anomalies, and low Sr contents, suggesting a shallower, more feldspathic source with abundant plagioclase. Eocene age volcanic and plutonic rocks have compositions transi- tional between those of the Cretaceous batholith and the Neogene rhyolites. These data are consistent with a progressively shallowing locus of silicic magma generation as the tectonic regime changed from convergence to extension.

Two models for the heating responsible for granite generation during convergent deformation may be distinguished on the basis of the length- and time-scales associated with the thermal perturbation, namely: (1) long-lived, lithospheric-scale heating as a conductive response to the deformation, and (2) transient, localised heating as a response to advective heat sources such as mantle-derived melts. The strong temperature dependence of lithospheric rheology implies that the heat advected within rising granites may affect the distribution and rates of deformation within the developing orogen in a way that reflects the thermal regime attendant on granite formation; this contention is supported by numerical models of lithospheric deformation based on the thin-sheet approximation. The model results are compared with geological and isotopic constraints on granite genesis in the southern Adelaide Fold Belt where intrusion spans a 25 Ma convergent deformation cycle, from about 516 to 490 Ma, resulting in crustal thickening to 50–55 km. High-T metamorphism in this belt is spatially restricted to an axis of magmatic activity where the intensity and complexity of deformation is significantly greater, and may have started earlier, than in adjacent low-grade areas. The implication is that granite generation and emplacement is a causative factor in localising deformation, and on the basis of the results of the mechanical models suggests that granite formation occurred in response to localised, transient crustal heating by mantle melts. This is consistent with the Nd- and Sr-isotopic composition of the granites which seems to reflect mixed sources with components derived both from the depleted contemporary mantle and the older crust.