A brief narration on significant accomplishments in computational fluid dynamics (CFD) for basic research and aerospace application is attempted to highlight the outstanding achievements by scientists and engineers of this discipline. To traverse such a vast domain, numerous and excellent contributions to CFD will be unintentionally overlooked by the author’s limited exposure. Nevertheless it is an ardent hope that the present abridged literature review will aid to reaffirm excellence in research and to identify knowledge shortfalls both in aerodynamics and its modeling and simulation capability. The future modeling and simulation technology needs, as well as potential and fertile research areas, are humbly put forth for consideration.

Future space telescopes will be required to have significantly greater aperture and lower areal density than is currently achievable. Gossamer spacecraft structures have been proposed as a means of achieving this, but the technologies are far from mature. A state-of-the-art review is timely and necessary as new structural paradigms are being considered for the next generation of space telescopes. There is, however, a knowledge gap between the structural engineering community and the additional fields involved in the complete telescope system, leading to the proposal of structures which are unlikely to be launched. It is hoped that, by providing a resource by which structural engineers are made aware of the wider issues in telescope design, this review will serve to overcome this knowledge gap to facilitate productive collaboration.

Helicopter accidents cause many fatalities, and their avoidance is a major area of work for Civil Aviation safety authorities around the World. This paper uses helicopter accident data from the United Kingdom between 1986 and 2005 for 566 accidents and from New Zealand between 1996 and 2006 for 230 accidents to analyse helicopter accidents according to five categories of causes: airworthiness failure (engine); airworthiness failure (non-engine), operational failure, maintenance failure and mixed failure (i.e. operational and airworthiness combined). Factors associated with accidents, e.g. the engine types and weights of the helicopters involved; the nature of the operations and the phase of flight of the helicopter are also analysed. Operational failures were further analysed by Human Factors Analysis and Classification Scheme (HFACS) and airworthiness failures by a logical scheme of helicopter components. The results indicate that operational failures, especially due to unsafe acts, are the major cause of accidents in both countries followed by airworthiness causes. Light single piston helicopters are by far the major group associated with accidents in both countries, with few accidents for twin turbine helicopters. The majority of accidents were in non-public operations with few in public operations and in both countries, the cruise/flight/circuit phase has the largest number of accidents. Further analyses indicated statistically significant associations: type of helicopter and the cause of accidents; type of helicopter and the phase of flight; cause of accidents and nature of flights; cause of accidents and phase of flights; training flights and inadequate supervision; landing and procedural error and cruise and attention failure.

The aeroelastic modeling and flutter characteristics of a shear deformable wing/stores configuration under pull-up angular velocity is investigated. An isotropic non-uniform wing, which structural model incorporates flexibility in transverse shear and warping effects, is considered. The aeroelastic governing equations and boundary conditions are determined via Hamilton’s variational principle. In order to exactly consider the span wise location and properties of the attached stores the generalised function theory is used. The partial differential equations are transformed into a set of eigenvalue equations through the extended Galerkin’s approach. Numerical simulation highlighting the effects of the pull-up angular velocity and store parameters and configurations, such as mass ratio and their attachment locations, on the flutter speed are presented. The results of flutter analyses are validated with the published results and good agreement is observed. Furthermore, the procedure for an optimal deployment of stores is obtained for the case of the wing with four stores.

Numerical models used to simulate the lofting mechanisms of runway stones were developed to assess the threat to aircraft structures from runway debris impacts. An inflated aircraft tyre model, which was validated by comparison with experimental indentation tests, showed that over-rolling of stones under typical take-off conditions led to only modest vertical loft velocities of less than 5 m/s. Experiments using a drop weight impactor simulated a section of aircraft tyre descending upon stones. These tests demonstrated that lofting was achieved for impacts with low rubber thickness. However, for impacts with greater rubber thickness, lofting was suppressed. Using more realistic tyre geometries resulted in launches with backspin, but only horizontally along the ground in the direction of the tyre axis. The speed at which launches occurred was proportional to the rate of descent of the tyre section and would consequently determine the loft speeds due to potential asperity lofting.