We consider a scalar conservation law with zero-flux boundary conditions imposed on the boundary of a rectangular multidimensional domain. We study monotone schemes applied to this problem. For the Godunov version of the scheme, we simply set the boundary flux equal to zero. For other monotone schemes, we additionally apply a simple modification to the numerical flux. We show that the approximate solutions produced by these schemes converge to the unique entropy solution, in the sense of [7], of the conservation law. Our convergence result relies on a BV bound on the approximate numerical solution. In addition, we show that a certain functional that is closely related to the total variation is nonincreasing from one time level to the next. We extend our scheme to handle degenerate convection-diffusion equations and for the one-dimensional case we prove convergence to the unique entropy solution.

In this paper, we consider the transform magnetic (TM) model of electromagnetic scattering in the cavity. By the Polynomial Preserving Recovery technique, we present superconvergence analysis for the vertex-edge-face type finite element. From the numerical example, we can see that the provided method is efficient and stable.

Numerical investigation of the underexpanded sonic coaxial jets is carried out using large eddy simulation for three typical inner nozzle lip-thicknesses. Various fundamental mechanisms dictating the flow phenomena including shock structure, shear layer evolution and sound production are investigated. It is found that the inner nozzle lip induces a recirculation zone between inner and outer jets, which significantly influences the behaviors of shock structures and shear layers. The sound properties of the coaxial jets are further analyzed in detail. As the inner lip-thickness increases, the helical screech mode switches to an axisymmetric one and high-frequency screech also occurs with an oscillation frequency of recirculation zone. Based on the temporal Fourier transform and correlation analysis, the primary sources of low- and high-frequency screeches are associated with the downstream shock cells in the jet column and the secondary shock structures in the outer annular jet, respectively. The proper orthogonal decomposition analysis reveals that the dominant structures constructed by the most energetic modes shift from the downstream shock cells region to the upstream secondary shock region as the lip-thickness increases. The results obtained in this study provide physical insight into the understanding of the mechanisms relevant to the coherent structures and sound properties in sonic coaxial jets.

In this paper, we consider the numerical method that is proposed and analyzed in [J. Cao and C. Xu, J. Comput. Phys., 238 (2013), pp. 154–168] for the fractional ordinary differential equations. It is based on the so-called block-by-block approach, which is a common method for the integral equations. We extend the technique to solve the nonlinear system of fractional ordinary differential equations (FODEs) and present a general technique to construct high order schemes for the numerical solution of the nonlinear coupled system of fractional ordinary differential equations (FODEs). By using the present method, we are able to construct a high order schema for nonlinear system of FODEs of the order α, α>0. The stability and convergence of the schema is rigorously established. Under the smoothness assumption f,g ∈ C 4[0,T], we prove that the numerical solution converges to the exact solution with order 3+α for 0<α≤1 and order 4 for α>1. Some numerical examples are provided to confirm the theoretical claims.

In this work, we study numerical methods for a coupled fluid-porous media flow model. The model consists of Stokes equations and Darcy's equations in two neighboring subdomains, coupling together through certain interface conditions. The weak form for the coupled model is of saddle point type. A mortar finite element method is proposed to approximate the weak form of the coupled problem. In our method, nonconforming Crouzeix-Raviart elements are applied in the fluid subdomain and the lowest order Raviart-Thomas elements are applied in the porous media subdomain; Meshes in different subdomains are allowed to be nonmatching on the common interface; Interface conditions are weakly imposed via adding constraint in the definition of the finite element space. The well-posedness of the discrete problem and the optimal error estimate for the proposed method are established. Numerical experiments are also given to confirm the theoretical results.

The equation of state (EOS) plays a crucial role in hyperbolic conservation laws for the compressible fluid. Whereas, the solid constitutive model with elastic-plastic phase transition makes the analysis of the solid Riemann problem more difficult. In this paper, one-dimensional elastic-perfectly plastic solid Riemann problem is investigated and its exact Riemann solver is proposed. Different from previous works treating the elastic and plastic phases integrally, we resolve the elastic wave and plastic wave separately to understand the complicate nonlinear waves within the solid and then assemble them together to construct the exact Riemann solver for the elastic-perfectly plastic solid. After that, the exact solid Riemann solver is associated with the fluid Riemann solver to decouple the fluid-solid multi-material interaction. Numerical tests, including gas-solid, water-solid high-speed impact problems are simulated by utilizing the modified ghost fluid method (MGFM).

In this paper, a new combined method is presented to simulate saltwater intrusion problem. A splitting positive definite mixed element method is used to solve the water head equation, and a symmetric discontinuous Galerkin (DG) finite element method is used to solve the concentration equation. The introduction of these two numerical methods not only makes the coefficient matrixes symmetric positive definite, but also does well with the discontinuous problem. The convergence of this method is considered and the optimal L2-norm error estimate is also derived.

In this paper, we first apply cosine radial basis function neural networks to solve the fractional differential equations with initial value problems or boundary value problems. In the examples, we successfully obtained the numerical solutions for the fractional Riccati equations and fractional Langevin equations. The computer graphics and numerical solutions show that this method is very effective.

In this work we utilize the boundary integral equation and the Dual Reciprocity Boundary Element Method (DRBEM) for the solution of the steady state convection-diffusion-reaction equations with variable convective coefficients in two-dimension. The DRBEM is a numerical method to transform the domain integrals into the boundary only integrals by using the fundamental solution of Helmholtz equation. Some examples are calculated to confirm the accuracy of the approach. The results obtained by the analytic solutions are in good agreement with ones provided by the DRBEM technique.

An investigation of natural convective flow and heat transfer inside a three dimensional rectangular cavity containing an array of discrete heat sources is carried out. The array consists of a row and columnwise regular arrangement of identical square shaped isoflux discrete heaters and is flush mounted on a vertical wall of the cavity. A symmetrical isothermal sink condition is maintained by cooling the cavity uniformly from either the opposite wall or the side walls or the top and bottom walls. The other walls of the cavity are maintained adiabatic. A finite volume method based on the SIMPLE algorithm and the power law scheme is used to solve the conservation equations. The parametric study covers the influence of pertinent parameters such as the Rayleigh number, the Prandtl number, side aspect ratio of the cavity and cavity heater ratio. A detailed fluid flow and heat transfer characteristics for the three cases are reported in terms of isothermal and velocity vector plots and Nusselt numbers. In general it is found that the overall heat transfer rate within the cavity for Ra=107 is maximum when the side aspect ratio of the cavity lies between 1.5 and 2. A more complex and peculiar flow pattern is observed in the presence of top and bottom cold walls which in turn introduces hot spots on the adiabatic walls. Their location and size are highly sensitive to the side aspect ratio of the cavity and hence offers more effective ways for passive heat removal.

In the present work concentrated on the two-dimensional problem of generalized thermoelasticity for a fiber-reinforced anisotropic thick plate under initial stress. Using generalized thermoelasticity theory with fractional order heat conduction, the problem has been solved by a normal mode analysis. The effect of hydrostatic initial stresses and fractional order parameter is shown graphically on the distributions of the temperature, displacement and thermal stress components. It is found from the graphs that the initial stress and the fractional parameter significantly influences the varieties of field amounts.

In this paper, we use moving mesh finite element method based upon 4P 1–P 1 element to solve the time-dependent Navier-Stokes equations in 2D. Two-layer nested meshes are used including velocity mesh and pressure mesh, and velocity mesh can be obtained by globally refining pressure mesh. We use hierarchy geometry tree to store the nested meshes. This data structure make convienence for adaptive mesh method and the construction of multigrid preconditioning. Several numerical problems are used to show the effect of moving mesh.

In the paper, we present an efficient two-grid method for the approximation of two-dimensional nonlinear reaction-diffusion equations using a expanded mixed finite-element method. We transfer the nonlinear reaction diffusion equation into first order nonlinear equations. The solution of the nonlinear system on the fine space is reduced to the solutions of two small (one linear and one non-linear) systems on the coarse space and a linear system on the fine space. Moreover, we obtain the error estimation for the two-grid algorithm. It is showed that coarse space can be extremely coarse and achieve asymptotically optimal approximation as long as the mesh sizes satisfy . An numerical example is also given to illustrate the effectiveness of the algorithm.