Abu-Absi, N. R., Kenty, B. M., Cuellar, M. E., Borys, M. C., Sakhamuri, S., Strachan, D. J., Hausladen, M. C. & Li, Z. J. (2011), ‘Real time monitoring of multiple parameters in mammalian cell culture bioreactors using an in-line Raman spectroscopy probe’, Biotechnology and Bioengineering 108(5), 1215–1221.Google Scholar

Ahmed, S. U., Ranganathan, P., Pandey, A. & Sivaraman, S. (2010), ‘Computational fluid dynamics modeling of gas dispersion in multi impeller bioreactor’, Journal of Bioscience and Bioengineering 109(6), 588–597.CrossRefGoogle ScholarPubMed

Al-Rubeai, M. (2015), Animal Cell Culture, Vol. 9, 9th edn, Spinger.Google Scholar

Allison, G., Cain, Y. T., Cooney, C., Garcia, T., Bizjak, T. G., Holte, O., Jagota, N., Komas, B., Korakianiti, E., Kourti, D., Madurawe, R., Morefield, E., Montgomery, F., Nasr, M., Randolph, W., Robert, J. L., Rudd, D. & Zezza, D. (2015), ‘Regulatory and quality considerations for continuous manufacturing May 20–21, 2014 continuous manufacturing symposium’, Journal of Pharmaceutical Sciences 104(3), 803–812.Google Scholar

Amanullah, A., McFarlane, C. M., Emery, A. N. & Nienow, A. W. (2001), ‘Scale-down model to simulate spatial pH variations in large-scale bioreactors’, Biotechnology and Bioengineering 73(5), 390–399.CrossRefGoogle ScholarPubMed

Ansorge, S., Esteban, G. & Schmid, G. (2010), ‘On-line monitoring of responses to nutrient feed additions by multi-frequency permittivity measurements in fed-batch cultivations of CHO cells’, Cytotechnology 62(2), 121–132.CrossRefGoogle ScholarPubMed

Antonia, S. J., Larkin, J. & Ascierto, P. A. (2014), ‘Immuno-oncology combinations: A review of clinical experience and future prospects’, Clinical Cancer Research 20(24), 6258–6268.CrossRefGoogle ScholarPubMed

Arnold, L., Lee, K., Rucker-Pezzini, J. & Lee, J. H. (2018), ‘Implementation of fully integrated continuous antibody processing: Effects on productivity and COGm’, Biotechnology Journal 14(2), 1–10.Google ScholarPubMed

Arnold, S. A., Crowley, J., Woods, N., Harvey, L. M. & McNeil, B. (2003), ‘In-situ near infrared spectroscopy to monitor key analytes in mammalian cell cultivation’, Biotechnology and Bioengineering 84(1), 13–19.Google Scholar

Assirelli, M., Bujalski, W., Eaglesham, A. & Nienow, A. (2005), ‘Intensifying micromixing in a semi-batch reactor using a Rushton turbine’, Chemical Engineering Science 60(8–9), 2333–2339.Google Scholar

Atkins, P., De Paula, J. & Friedmand, R. (2010), Physical Chemistry, 9th edn.Google Scholar

Bacchin, P., Aimar, P. & Field, R. W. (2006), ‘Critical and sustainable fluxes: Theory, experiments and applications’, Journal of Membrane Science 281(1–2), 42–69.CrossRefGoogle Scholar

Bailey, J. E. & Ollis, D. F. (1986), ‘Fundamentals of Biochemical engineering’.Google Scholar

Bandyopadhyay, B., Humphrey, A. E. & Taguchi, H. (1967), ‘Dynamic measurement of the volumetric oxygen transfer coefficient in fermentation systems’, Biotechnology and Bioengineering 9(4), 533–544.Google Scholar

Baptista, R. P., Fluri, D. A. & Zandstra, P. W. (2013), ‘High density continuous production of murine pluripotent cells in an acoustic perfused bioreactor at different oxygen concentrations.’, Biotechnology and Bioengineering 110(2), 648–655.Google Scholar

Barbaroux, M., Gerighausen, S. & Hackel, H. (2014), ‘An approach to quality and security of supply for single-use bioreactors’, Advances in Biochemical Engineering/Biotechnology 138, 239–272.Google Scholar

Barberis, M., Klipp, E., Vanoni, M. & Alberghina, L. (2007), ‘Cell size at S phase initiation: An emergent property of the G1/S network’, PLoS Computational Biology 3(4), e64.Google Scholar

Barrett, S., Franklin, J., Stangl, M., Cvetkovic, A. & He, W. (2018), ‘Intensification of a multi-product perfusion platform managing growth characteristics at high cell density for maximized volumetric productivity’, Cell Culture Engineering XVI.Google Scholar

Barrett, T. A., Wu, A., Zhang, H., Levy, M. S. & Lye, G. J. (2010), ‘Microwell engineering characterization for mammalian cell culture process development’, Biotechnology and Bioengineering 105(2), 260–275.CrossRefGoogle ScholarPubMed

Bartholomew, D. J. (2010), ‘Principal components analysis’, in International Encyclopedia of Education, Vol. 2, Elsevier, pp. 374–377.Google Scholar

Bates, R. L., Fondy, P. L. & Fenic, J. G. (1966), ‘Impeller characteristics and power’, in J. Uh L, VW; Gray, ed., Mixing: Theory and Practice 1, Vol. 1, pp. 111–178.Google Scholar

Baur, D., Angarita, M., Müller-Späth, T. & Morbidelli, M. (2015), ‘Optimal model-based design of the twin-column CaptureSMB process improves capacity utilization and productivity in protein A affinity capture’, Biotechnology Journal 11(1), 135–145.CrossRefGoogle ScholarPubMed

Baur, D., Angarita, M., Müller-Späth, T., Steinebach, F. & Morbidelli, M. (2016), ‘Comparison of batch and continuous multi-column protein A capture processes by optimal design’, Biotechnology Journal 11(7), 920–931.Google Scholar

Bausch, M., Schultheiss, C. & Sieck, J. B. (2018), ‘Recommendations for comparison of productivity between fed-batch and perfusion processes’, Biotechnology Journal 14(2), 1–4.Google Scholar

Beier, S. P. & Jonsson, G. (2009), ‘Critical flux determination by flux-stepping’, Wiley Inter-Science 56(7), 1739–1747.Google Scholar

Bendiak, B. & Schachter, H. (1987), ‘Control of glycoprotein synthesis: Kinetic mechanism, substrate specificity, and inhibition characteristics of UDP-N-acetylglucosamine:alpha-D-mannoside beta 1-2 N-acetylglucosaminyltransferase II from rat liver’, Journal of Biological Chemistry 262(12), 5784–5790.CrossRefGoogle ScholarPubMed

Benz, G. T. (2011), ‘Bioreactor design for chemical engineers’, American Institute of Chemical Engineers 107, 21–26.Google Scholar

Beresford, T. P., Fitzsimons, N. A., Brennan, N. L. & Cogan, T. M. (2001), ‘Recent advances in cheese microbiology’, International Dairy Journal 11, 254–274.Google Scholar

Berg, J. M., Tymoczko, J. L. & Stryer, L. (2007), Biochemistry, 6th edn, Sara Tenney.Google Scholar

Berg, P. (1974), ‘Potential biohazards of recombinant DNA molecules’, Science 1114(1973), 1973–1974.Google Scholar

Berg, P., Baltimore, D., Brenner, S., Roblin, R. & Singer, M. (1975), ‘Summary statement of the Asilomar conference on recombinant DNA molecules’, Proceedings of the National Academy of Sciences of the United States of America 72, 1981–1984.CrossRefGoogle ScholarPubMed

Berg, P. & Mertz, J. E. (2010), ‘Personal reflections on the origins and emergence of recombinant DNA technology’, Genetics 184(1), 9–17.Google Scholar

Berry, B. N., Dobrowsky, T. M., Timson, R. C., Kshirsagar, R., Ryll, T. & Wiltberger, K. (2016), ‘Quick generation of Raman spectroscopy based in-process glucose control to influence biopharmaceutical protein product quality during mammalian cell culture’, Biotechnology Progress 32(1), 224–234.CrossRefGoogle ScholarPubMed

Bertrand, V., Karst, D. J. & Morbidelli, M. (2019), ‘Transcriptome and proteome analysis of steady state in a perfusion CHO cell culture process’, Biotechnology and Bioengineering pp. 1–14.Google Scholar

Bertrand, V., Vogg, S., Villiger, T. K., Stettler, M., Broly, H., Soos, M. & Morbidelli, M. (2018), ‘Proteomic analysis of micro-scale bioreactors as scale-down model for a mAb producing CHO industrial fed-batch platform’, Journal of Biotechnology 279, 27–36.Google Scholar

Beyer, B., Schuster, M., Jungbauer, A. & Lingg, N. (2018), ‘Microheterogeneity of recombinant antibodies: Analytics and functional impact’, Biotechnology Journal 13(1), 1–11.Google Scholar

Bibila, T. A. & Robinson, D. K. (1995), ‘In pursuit of the optimal fed-batch process for monoclonal antibody production’, Biotechnology Progress 11(1), 1–13.CrossRefGoogle ScholarPubMed

Bielser, J.-M., Chappuis, L., Xiao, Y., Souquet, J., Broly, H. & Morbidelli, M. (2019a), ‘Perfusion cell culture for the production of conjugated recombinant fusion proteins reduces clipping and quality heterogeneity compared to batch-mode processes’, Journal of Biotechnology 302, 26–31.Google Scholar

Bielser, J.-M., Domaradzki, J., Souquet, J., Broly, H. & Morbidelli, M. (2019b), ‘Semi-continuous scale-down models for clone and operating parameter screening in perfusion bioreactors’, Biotechnology Progress 35(3), e2790.CrossRefGoogle ScholarPubMed

Bielser, J.-M., Wolf, M., Souquet, J., Broly, H. & Morbidelli, M. (2018), ‘Perfusion mammalian cell culture for recombinant protein manufacturing: A critical review’, Biotechnology Advances 36(4), 1328–1340.Google Scholar

Bödeker, B., Potere, E. & Dove, G. (2013), ‘Production of recombinant factor VIII from perfusion cultures: II. Large-scale purification’, in Spier, R. E., Griffiths, J. B. & Berthold, W., eds, Animal Cell Technology, Butterworth-Heinemann, pp. 584–590.Google Scholar

Böhm, E., Voglauer, R., Steinfellner, W., Kunert, R., Borth, N. & Katinger, H. (2004), ‘Screening for improved cell performance: Selection of subclones with altered production kinetics or improved stability by cell sorting’, Biotechnology and Bioengineering 88(6), 699–706.Google Scholar

Bonham-Carter, J. (2018), ‘High productivity harvest – Intensify harvest and displace depth filtration in fed-batch cell culture’, in BioProcess International.Google Scholar

Bonham-Carter, J. & Shevitz, J. (2011), ‘A brief history of perfusion’, BioProcess International 9(9), 24–30.Google Scholar

Bosco, B., Paillet, C., Amadeo, I., Mauro, L., Orti, E. & Forno, G. (2017), ‘Alternating flow filtration as an alternative to internal spin filter based perfusion process: Impact on productivity and product quality’, Biotechnology Progress 33(4), 1–5.CrossRefGoogle ScholarPubMed

Brányik, T., Vicente, A. A., Dostálek, P. & Teixeira, J. A. (2005), ‘Continuous beer fermentation using immobilized yeast cell bioreactor systems’, Biotechnology Progress 21(3), 653–663.Google Scholar

Breinlinger, K. J., Hobbs, E. D., Malleo, D., Nevill, J. T. & White, M. P. (2018), ‘Movement and selection of micro-objects in a microfluidic apparatus’. U.S. Patent 0099282 A1.Google Scholar

Browne, S. M. & Al-Rubeai, M. (2007), ‘Selection methods for high-producing mammalian cell lines’, Trends in Biotechnology 25(9), 425–432.Google Scholar

Brühlmann, D., Jordan, M., Hemberger, J., Sauer, M., Stettler, M. & Broly, H. (2015), ‘Tailoring recombinant protein quality by rational media design’, Biotechnology Progress 31(3), 615–629.Google Scholar

Brühlmann, D., Muhr, A., Parker, R., Vuillemin, T., Bucsella, B., Kalman, F., Torre, S., La Neve, F., Lembo, A., Haas, T., Sauer, M., Souquet, J., Broly, H., Hemberger, J. & Jordan, M. (2017a), ‘Cell culture media supplemented with raffinose reproducibly enhances high mannose glycan formation’, Journal of Biotechnology 252, 32–42.Google Scholar

Brühlmann, D., Sokolov, M., Butté, A., Sauer, M., Hemberger, J., Souquet, J., Broly, H. & Jordan, M. (2017b), ‘Parallel experimental design and multivariate analysis provides efficient screening of cell culture media supplements to improve Biosimilar product quality’, Biotechnology and Bioengineering 114(7), 1448–1458.Google Scholar

Brunner, M., Doppler, P., Klein, T., Herwig, C. & Fricke, J. (2018), ‘Elevated pCO₂ affects the lactate metabolic shift in CHO cell culture processes’, Engineering in Life Sciences 18(3), 204–214.Google Scholar

Buckley, K. & Ryder, A. G. (2017), ‘Applications of Raman spectroscopy in biopharmaceutical manufacturing: A short review’, Applied Spectroscopy 71(6), 1085–1116.Google Scholar

Bujalski, W., Nienow, A., Chatwin, S. & Cooke, M. (1987), ‘The dependency on scale of power numbers of Rushton disc turbines’, Chemical Engineering Science 42(2), 317–326.Google Scholar

Bunnak, P., Allmendinger, R., Ramasamy, S. V., Lettieri, P. & Titchener-Hooker, N. J. (2016), ‘Life-cycle and cost of goods assessment of fed-batch and perfusion-based manufacturing processes for mAbs’, Biotechnology Progress 32(5), 1324–1335.Google Scholar

Cao, D.-S., Xu, Q.-S., Liang, Y.-Z., Chen, X. & Li, H.-D. (2010), ‘Prediction of aqueous solubility of druglike organic compounds using partial least squares, back-propagation network and support vector machine’, Journal of Chemometrics 24, 584–595.CrossRefGoogle Scholar

Caplice, E. & Fitzgerald, G. F. (1999), ‘Food fermentations: Role of microorganisms in food production and preservation’, International Journal of Food Microbiology 50(1–2), 131–149.Google Scholar

Carrondo, M. J., Alves, P. M., Carinhas, N., Glassey, J., Hesse, F., Merten, O. W., Micheletti, M., Noll, T., Oliveira, R., Reichl, U., Staby, A., Teixeira, A. P., Weichert, H. & Mandenius, C. F. (2012), ‘How can measurement, monitoring, modeling and control advance cell culture in industrial biotechnology?’, Biotechnology Journal 7(12), 1522–1529.CrossRefGoogle ScholarPubMed

Carvell, J. P. & Dowd, J. E. (2006), ‘On-line measurements and control of viable cell density in cell culture manufacturing processes using radio-frequency impedance’, Cytotechnology 50(1–3), 35–48.Google Scholar

Cervera, A. E., Petersen, N., Lantz, A. E., Larsen, A. & Gernaey, K. V. (2009), ‘Application of near-infrared spectroscopy for monitoring and control of cell culture and fermentation’, Biotechnology Progress 25(6), 1561–1581.Google Scholar

Chakrabarty, A., Buzzard, G. T. & Rundell, A. E. (2013), ‘Model-based design of experiments for cellular processes’, Wiley Interdisciplinary Reviews: Systems Biology and Medicine 5(2), 181–203.Google Scholar

Chandrasekharan, K. & Calderbank, P. (1981), ‘Further observations on the scale-up of aerated mixing vessels’, Chemical Engineering Science 36(5), 818–823.Google Scholar

Chen, C., Wong, H. E. & Goudar, C. T. (2018), ‘Upstream process intensification and continuous manufacturing’, Current Opinion in Chemical Engineering 22, 191–198.Google Scholar

Chen, L., Nguang, S. K., Chen, X. D. & Li, X. M. (2004), ‘Modelling and optimization of fed-batch fermentation processes using dynamic neural networks and genetic algorithms’, Biochemical Engineering Journal 22(1), 51–61.CrossRefGoogle Scholar

Chen, T.-T. (2013), ‘Immuno-oncology’, Journal for ImmunoTherapy of Cancer 1(18), 1–9.CrossRefGoogle ScholarPubMed

Chisti, Y. (2000), ‘Animal-cell damage in sparged bioreactors’, Trends in Biotechnology 18(10), 420–432.Google Scholar

Chisti, Y. (2001), ‘Hydrodynamic damage to animal cells’, Critical Reviews in Biotechnology 21(2), 67–110.Google Scholar

Chotteau, V. (2017), ‘Process development in screening scale bioreactors and perspectives for very high cell density perfusion’, Integrated Continuous Biomanufacturing III, Suzanne Farid, University College London, United Kingdom Chetan Goudar, Amgen, USA Paula Alves, IBET, Portugal Veena Warikoo, Axcella Health, Inc., USA Eds, ECI Symposium Series. p. 10691.Google Scholar

Chu, L. & Robinson, D. K. (2001), ‘Industrial choices for protein production by large-scale cell culture’, Current Opinion in Biotechnology 12(2), 180–187.Google Scholar

Chugh, P. & Roy, V. (2014), ‘Biosimilars: Current scientific and regulatory considerations’, Current Clinical Pharmacology 9(1), 53–63.Google Scholar

Chuppa, S., Tsai, Y. S., Yoon, S., Shackleford, S., Rozales, C., Bhat, R., Tsay, G., Matanguihan, C., Konstantinov, K. & Naveh, D. (1997), ‘Fermentor temperature as a tool for control of high-density perfusion cultures of mammalian cells’, Biotechnology and Bioengineering 55(2), 328–338.Google Scholar

Clincke, M. F., Mölleryd, C., Samani, P. K., Lindskog, E., Fäldt, E., Walsh, K. & Chotteau, V. (2013b), ‘Very high density of Chinese hamster ovary cells in perfusion by alternating tangential flow or tangential flow filtration in WAVE bioreactor, Part II: Applications for antibody production and cryopreservation’, Biotechnology Progress 29(3), 768–777.Google Scholar

Clincke, M. F., Mölleryd, C., Zhang, Y., Lindskog, E., Walsh, K. & Chotteau, V. (2011), ‘Study of a recombinant CHO cell line producing a monoclonal antibody by ATF or TFF external filter perfusion in a WAVE Bioreactor’, BMC Proceedings 5(8), 105.CrossRefGoogle ScholarPubMed

Clincke, M. F., Mölleryd, C., Zhang, Y., Lindskog, E., Walsh, K. & Chotteau, V. (2013a), ‘Very high density of CHO cells in perfusion by ATF or TFF in WAVE bioreactor, Part I: Effect of the cell density on the process’, Biotechnology Progress 29(3), 754–767.Google Scholar

Coffman, J., Lin, H., Wang, S., Godfrey, S., Orozco, R., Yildirim, S., Salm, J., Hiller, G., Gagnon, M., Farner, R., Kottmeier, B. & Sullivan, D. (2017), ‘Balancing continuous, integrated, and batch processing’, in Integrated Continuous Biomanufacturing III.Google Scholar

Cohen, S. N., Chang, A. C. Y. & Hsu, L. (1972), ‘Non-chromosomal antibiotic resistance in bacteria: genetic transformation of Escherichia coli by R-factor DNA’, Proceedings of the National Academy of Sciences of the United States of America 69, 2110–2114.Google Scholar

Cohen, S. N., Chang, A. C. Y., Boyer, H. W. & Helling, R. B. (1973), ‘Construction of biologically functional bacterial plasmids in vitro’, Proceedings of the National Academy of Sciences of the United States of America 70(11), 3240–3244.Google Scholar

Colosimo, A., Goncz, K., Holmes, A., Kunzelmann, K., Bennet, M. & Gruenert, D. (2000), ‘Transfer and expression of foreign genes in mammalian cells’, BioTechniques 29(2), 314–331.Google Scholar

Coronel, J., Klausing, S., Heinrich, C., Noll, T., Figueredo-Cardero, A. & Castilho, L. R. (2016), ‘Valeric acid supplementation combined to mild hypothermia increases productivity in CHO cell cultivations’, Biochemical Engineering Journal 114, 101–109.Google Scholar

Croughan, M. S., Konstantinov, K. B. & Cooney, C. (2015), ‘The future of industrial bioprocessing: Batch or continuous?’, Biotechnology and Bioengineering 112(4), 648–651.Google Scholar

Davey, C. L., Davey, H. M., Kell, D. B. & Todd, R. W. (1993), ‘Introduction to the dielectric estimation of cellular biomass in real time, with special emphasis on measurements at high volume fractions’, Analytica Chimica Acta 279(1), 155–161.Google Scholar

Davis, D., Delia, S., Safc, L., Ross, S., Lyons, D. & Hodzic, I. (2015), ‘Modeling perfusion at small scale using ambr^© 15’, in ECI Digital Archives.Google Scholar

De Jesus, M. J., Girard, P., Bourgeois, M., Baumgartner, G., Jacko, B., Amstutz, H. & Wurm, F. M. (2004), ‘TubeSpin satellites: A fast track approach for process development with animal cells using shaking technology’, Biochemical Engineering Journal 17(3), 217–223.Google Scholar

Demain, A. L. (2007), ‘The business of biotechnology’, Industrial Biotechnology 3(3), 269–283.Google Scholar

Deschênes, J.-S., Desbiens, A., Perrier, M. & Kamen, A. (2006), ‘Use of cell bleed in a high cell density perfusion culture and multivariable control of biomass and metabolite concentrations’, Asia-Pacific Journal of Chemical Engineering 1(1–2), 82–91.CrossRefGoogle Scholar

Deshpande, N. S. & Barigou, M. (1999), ‘Performance characteristics of novel mechanical foam breakers in a stirred tank reactor’, Journal of Chemical Technology and Biotechnology 987(May), 979–987.Google Scholar

Deshpande, R. R. & Heinzle, E. (2004), ‘On-line oxygen uptake rate and culture viability measurement of animal cell culture using microplates with integrated oxygen sensors’, Biotechnology Letters 26(9), 763–767.Google Scholar

D’Este, M., Alvarado-Morales, M. & Angelidaki, I. (2017), ‘Amino acids production focusing on fermentation technologies: A review’, Biotechnology Advances 36(1), 14–25.Google Scholar

Devi, T. T. & Kumar, B. (2017), ‘Mass transfer and power characteristics of stirred tank with Rushton and curved blade impeller’, Engineering Science and Technology, an International Journal 20(2), 730–737.Google Scholar

Dhir, S., Morrow, K. J., Rhinehart, R. R. & Wiesner, T. (2000), ‘Dynamic optimization of hybridoma growth in a fed-batch bioreactor’, Biotechnology and Bioengineering 67(2), 197–205.Google Scholar

Dorival-García, N. & Bones, J. (2017), ‘Monitoring leachables from single-use bioreactor bags for mammalian cell culture by dispersive liquid-liquid microextraction followed by ultra high performance liquid chromatography quadrupole time of flight mass spectrometry’, Journal of Chromatography A 1512, 51–60.Google Scholar

Dowd, J. E., Jubb, A., Kwok, K. E. & Piret, J. M. (2003), ‘Optimization and control of perfusion cultures using a viable cell probe and cell specific perfusion rates’, Cytotechnology 42(1), 35–45.Google Scholar

Dowd, J. E., Weber, I., Rodriguez, B., Piret, J. M. & Kwok, K. E. (1999), ‘Predictive control of hollow-fiber bioreactors for the production of monoclonal antibodies’, Biotechnology and Bioengineering 63(4), 484–492.Google Scholar

Du, Z., Treiber, D., Mccarter, J. D., Fomina-Yadlin, D., Saleem, R. A., Mccoy, R. E., Zhang, Y., Tharmalingam, T., Leith, M., Follstad, B. D., Dell, B., Grisim, B., Zupke, C., Heath, C., Morris, A. E. & Reddy, P. (2015), ‘Use of a small molecule cell cycle inhibitor to control cell growth and improve specific productivity and product quality of recombinant proteins in CHO cell cultures’, Biotechnology and Bioengineering 112(1), 141–155.Google Scholar

Ducommun, P., Bolzonella, I., Marison, I., von Stockar, U. & Rhiel, M. (2002), ‘Real-time in situ monitoring of freely suspended and immobilized cell cultures based on mid-infrared spectroscopic measurements’, Biotechnology and Bioengineering 77(2), 174–185.Google Scholar

Ducommun, P., Bolzonella, I., Rhiel, M., Pugeaud, P., Von Stockar, U. & Marison, I. W. (2001a), ‘On-line determination of animal cell concentration’, Biotechnology and Bioengineering 72(5), 515–522.3.0.CO;2-Q>CrossRefGoogle ScholarPubMed

Duetz, W. A. (2007), ‘Microtiter plates as mini-bioreactors: Miniaturization of fermentation methods’, Trends in Microbiology 15(10), 469–475.Google Scholar

Ecker, D. M., Jones, S. D. & Levine, H. L. (2015), ‘The therapeutic monoclonal antibody market’, mAbs 7(1), 9–14.Google Scholar

Eibl, R., Kaiser, S., Lombriser, R. & Eibl, D. (2010), ‘Disposable bioreactors: The current state-of-the-art and recommended applications in biotechnology’, Applied Microbiology and Biotechnology 86(1), 41–49.Google Scholar

Eleftherios, P. (1991), ‘Media additives for protecting freely suspended animal cells against agitation and aeration damage’, Tibtech 9, 316–324.Google Scholar

Eon-Duval, A., Gleixner, R., Valax, P., Soos, M., Neunstoecklin, B., Morbidelli, M. & Broly, H. (2013), ‘Quality by design applied to a Fc-fusion protein: A case studys’, in Therapeutic Fc-Fusion Proteins, Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim, pp. 155–189.Google Scholar

Eon-Duval, A., Valax, P., Solacroup, T., Broly, H., Gleixner, R., Strat, C. L. & Sutter, J. (2012), ‘Application of the quality by design approach to the drug substance manufacturing process of an Fc fusion protein: Towards a global multi⣳step design space’, Journal of Pharmaceutical Sciences 101(10), 3604–3618.Google Scholar

Escandar, G. M., Damiani, P. C., Goicoechea, H. C. & Olivieri, A. C. (2006), ‘A review of multivariate calibration methods applied to biomedical analysis’, Microchemical Journal 82(1), 29–42.Google Scholar

Esmonde-White, K. A., Cuellar, M., Uerpmann, C., Lenain, B. & Lewis, I. R. (2017), ‘Raman spectroscopy as a process analytical technology for pharmaceutical manufacturing and bioprocessing’, Analytical and Bioanalytical Chemistry 409(3), 637–649.CrossRefGoogle ScholarPubMed

Feidl, F., Vogg, S., Wolf, M., Podobnik, M., Ruggeri, C., Ulmer, N., … & Morbidelli, M. (2020). Process-wide control and automation of an integrated continuous manufacturing platform for antibodies. Biotechnology and Bioengineering.Google Scholar

Feidl, F. (2019), Digitalization Platform and Supervisory Control of a Continuous Integrated, PhD thesis, ETH Zürich.Google Scholar

Feidl, F., Garbellini, S., Vogg, S., Sokolov, M., Souquet, J., Broly, H., Butté, A. & Morbidelli, M. (2019), ‘A new flow cell and chemometric protocol for implementing in⣳line Raman spectroscopy in chromatography’, Biotechnology Progress (March), e2847.Google Scholar

Finn, B., Harvey, L. M., McNeil, B. & McNeil, B. (2006), ‘Near-infrared spectroscopic monitoring of biomass, glucose, ethanol and protein content in a high cell density baker’s yeast fed-batch bioprocess’, Yeast 23(7), 507–517.Google Scholar

Fisher, A. C. C., Kamga, M.-H. H., Agarabi, C., Brorson, K., Lee, S. L. L. & Yoon, S. (2018), ‘The current scientific and regulatory landscape in advancing integrated continuous biopharmaceutical manufacturing’, Trends in Biotechnology 37(3), 253–267.Google Scholar

Fleischaker, R. J. & Sinskey, A. J. (1981), ‘Oxygen demand and supply in cell culture’, European Journal of Applied Microbiology and Biotechnology 12(4), 193–197.Google Scholar

Fleming, A. (1929), ‘On the antibacterial action of cultures of a penicillium, with special reference to their use in the isolation of B. influenzae. 1929’, British Journal of Experimental Pathology 10(3), 226–236.Google Scholar

Fogler, H. S. (2008), Elements of Chemical Reaction Engineering, 5th edn, Pearson Education.Google Scholar

Frenzel, A., Hust, M. & Schirrmann, T. (2013), ‘Expression of recombinant antibodies’, Frontiers in Immunology 4(July), 1–20.Google Scholar

Froment, G. F., Bischoff, K. B. & De Wilde, J. (1990), Chemical Reactor Analysis and Design, Vol. 2, Wiley New York.Google Scholar

Gagnon, M., Hiller, G., Luan, Y. T., Kittredge, A., Defelice, J. & Drapeau, D. (2011), ‘High-end pH-controlled delivery of glucose effectively suppresses lactate accumulation in CHO fed-batch cultures’, Biotechnology and Bioengineering 108(6), 1328–1337.Google Scholar

García-Muñoz, S. & Polizzi, M. (2012), ‘WSPLS: A new approach towards mixture modeling and accelerated product development’, Chemometrics and Intelligent Laboratory Systems 114, 116–121.Google Scholar

Garnier, A., Voyer, R., Tom, R., Perret, S., Jardin, B. & Kamen, A. (1996), ‘Dissolved carbon dioxide accumulation in a large scale and high density production of TGFβ receptor with baculovirus infected Sf-9 cells’, Cytotechnology 22(1), 53–63.Google Scholar

Gautam, R., Vanga, S., Ariese, F. & Umapathy, S. (2015), ‘Review of multidimensional data processing approaches for Raman and infrared spectroscopy’, EPJ Techniques and Instrumentation 2(1), 8.Google Scholar

Glassey, J., Gernaey, K. V., Clemens, C., Schulz, T. W., Oliveira, R., Striedner, G. & Mandenius, C.-F. (2011), ‘Process analytical technology (PAT) for biopharmaceuticals.’, Biotechnology Journal 6(4), 369–377.Google Scholar

Glassey, J. & von Stosch, M., eds (2018), Hybrid Modeling in Process Industries, CRC Press.Google Scholar

Godawat, R., Konstantinov, K., Rohani, M. & Warikoo, V. (2015), ‘End-to-end integrated fully continuous production of recombinant monoclonal antibodies’, Journal of Biotechnology 213, 13–19.Google Scholar

Godoy Silva, R., Berdugo, C. & Chalmers, J. J. (2010), ‘Aeration, mixing, and hydrodynamics, animal cell bioreactors’, in Encyclopedia of Industrial Biotechnology, American Cancer Society, pp. 1–27.Google Scholar

Goh, P. S., Ismail, A. F. & Ng, B. C. (2017), ‘Raman spectroscopy’, Membrane Characterization 72(12), 31–46.Google Scholar

Goletz, S., Stahn, R. & Kreye, S. (2016), Patent WO 2016/193083 A1.Google Scholar

Gomez, N., Ambhaikar, M., Zhang, L., Huang, C.-J. J., Barkhordarian, H., Lull, J. & Gutierrez, C. (2017), ‘Analysis of tubespins as a suitable scale-down model of bioreactors for high cell density CHO cell culture’, Biotechnology Progress 33(2), 490–499.Google Scholar

Gorenflo, V. M., Angepat, S., Bowen, B. D. & Piret, J. M. (2003), ‘Optimization of an acoustic cell filter with a novel air-backflush system’, Biotechnology Progress 19(1), 30–36.CrossRefGoogle ScholarPubMed

Goudar, C., Stevens, J., Le, K., Gupta, S., Tan, C. & Munro, T. (2017), ‘Enabling next-generation cell line development using continuous perfusion and nanofluidic technologiese’, in Integrated Continuous Biomanufacturing III.Google Scholar

Goudar, C. T., Matanguihan, R., Long, E., Cruz, C., Zhang, C., Piret, J. M. & Konstantinov, K. B. (2007), ‘Decreased p_CO2 accumulation by eliminating bicarbonate addition to high cell-density cultures’, Biotechnology and Bioengineering 96(6), 1107–1117.Google Scholar

Goudar, C. T., Piret, J. M. & Konstantinov, K. B. (2011), ‘Estimating cell specific oxygen uptake and carbon dioxide production rates for mammalian cells in perfusion culture’, Biotechnology Progress 27(5), 1347–1357.Google Scholar

Gramer, M. J., Eckblad, J. J., Donahue, R., Brown, J., Shultz, C., Vickerman, K., Priem, P., van den Bremer, E. T., Gerritsen, J. & van Berkel, P. H. (2011), ‘Modulation of antibody galactosylation through feeding of uridine, manganese chloride, and galactose’, Biotechnology and Bioengineering 108(7), 1591–1602.Google Scholar

Gray, D. R., Chen, S., Howarth, W., Inlow, D. & Maiorella, B. L. (1996), ‘CO2 in large-scale and high-density CHO cell perfusion culture’, Cytotechnology 22(1–3), 65–78.CrossRefGoogle ScholarPubMed

Grillberger, L., Kreil, T. R., Nasr, S. & Reiter, M. (2009), ‘Emerging trends in plasma-free manufacturing of recombinant protein therapeutics expressed in mammalian cells’, Biotechnology Journal 4(2), 186–201.Google Scholar

Gunther, J., Conner, J. & Seborg, D. (2007), ‘Fault detection and diagnosis in an industrial fed-batch cell culture process’, Biotechnology Progress 23(4), 851–857.Google Scholar

Hammond, M., Marghitoiu, L., Lee, H., Perez, L., Rogers, G., Nashed-Samuel, Y., Nunn, H. & Kline, S. (2014), ‘A cytotoxic leachable compound from single-use bioprocess equipment that causes poor cell growth performance’, Biotechnology Progress 30(2), 332–337.Google Scholar

Heidemann, R., Lünse, S., Tran, D. & Zhang, C. (2010), ‘Characterization of cell-banking parameters for the cryopreservation of mammalian cell lines in 100-mL cryobags’, Biotechnology Progress 26(4), 1154–1163.Google Scholar

Heidemann, R., Mered, M., Wang, D. Q., Gardner, B., Zhang, C., Michaels, J., Henzler, H. J., Abbas, N. & Konstantinov, K. (2002), ‘A new seed-train expansion method for recombinant mammalian cell lines’, Cytotechnology 38(1–3), 99–108.CrossRefGoogle ScholarPubMed

Helenius, A. & Aebi, M. (2001), ‘Intracellular functions of N-linked glycans’, Science 291(5512), 2364–2369.Google Scholar

Henry, O., Kwok, E. & Piret, J. M. (2008), ‘Simpler non-instrumented batch and semi-continuous cultures provide mammalian cell kinetic data comparable to continuous and perfusion cultures’, Biotechnology Progress 24(4), 921–931.Google Scholar

Higel, F., Seidl, A., Sörgel, F. & Friess, W. (2016), ‘N-glycosylation heterogeneity and the influence on structure, function and pharmacokinetics of monoclonal antibodies and Fc fusion proteins’, European Journal of Pharmaceutics and Biopharmaceutics 100, 94–100.Google Scholar

Hiller, G. W., Ovalle, A. M., Gagnon, M. P., Curran, M. L. & Wang, W. (2017), ‘Cell-controlled hybrid perfusion fed-batch CHO cell process provides significant productivity improvement over conventional fed-batch cultures’, Biotechnology and Bioengineering 114(7), 1438–1447.CrossRefGoogle ScholarPubMed

Hoos, A. (2016), ‘Development of immuno-oncology drugs: From CTLA4 to PD1 to the next generations’, Nature Reviews Drug Discovery 15(4), 235–247.Google Scholar

Hossler, P., Khattak, S. F. & Li, Z. J. (2009), ‘Optimal and consistent protein glycosylation in mammalian cell culture’. Glycobiology 19(9), 936–949.Google Scholar

Howard, D. H., Bach, P. B., Berndt, E. R. & Rena, M. C. (2015), ‘Pricing in the market for anticancer drugs’, Journal of Economic Perspectives 29(1), 1689–1699.Google Scholar

Hsie, A. W., Recio, L., Katz, D. S., Lee, C. Q., Wagner, M. & Schenley, R. L. (1986), ‘Evidence for reactive oxygen species inducing mutations in mammalian cells.’, Proceedings of the National Academy of Sciences 83(24), 9616–9620.Google Scholar

Hu, W.-S. (2012), Cell Culture Bioprocess Engineering. Springer.Google Scholar

Hubert, M. & Engelen, S. (2004), ‘Robust PCA and classification in biosciences’, Bioinformatics 20(11), 1728–1736.Google Scholar

Hughes, S. S. (2001), ‘Making dollars out of DNA: The first major patent in biotechnology and the commercialization of molecular biology, 1974–1980’, Isis 92(3), 541–575.Google Scholar

Hughmark, G. A. (1980), ‘Power requirements and interfacial area in gas–liquid turbine agitated systems’, Industrial and Engineering Chemistry Process Design and Development 19(4), 638–641.Google Scholar

Indahl, U. (2005), ‘A twist to partial least squares regression’, Journal of Chemometrics 19(1), 32–44.Google Scholar

Ishida, M., Haga, R., Nishimura, N., Matuzaki, H. & Nakano, R. (1990), ‘High cell density suspension culture of mammalian anchorage independent cells: Oxygen transfer by gas sparging and defoaming with a hydrophobic net’, Cytotechnology 4(3), 215–225.Google Scholar

Ivarsson, M., Noh, H., Morbidelli, M. & Soos, M. (2015), ‘Insights into pH-induced metabolic switch by flux balance analysis’, Biotechnology Progress 31(2), 347–357.Google Scholar

Jackson, D., Symons, R. H. & Berg, P. (1972), ‘Biochemical method for inserting new genetic information into DNA of simian virus 40: Circular DNA molecules containing lambda phage genes and the galactose operon of Escherichia coli’, Proceedings of the National Academy of Sciences of the United States of America 69, 2904–2909.Google Scholar

Jacquemart, R., Vandersluis, M., Zhao, M., Sukhija, K., Sidhu, N. & Stout, J. (2016), ‘A single-use strategy to enable manufacturing of affordable biologics’, Computational and Structural Biotechnology Journal 14, 309–318.Google Scholar

Jagschies, G., Lindskog, E., Lacki, K. & Galliher, P. M. (2018), Biopharmaceutical Processing: Development, Design, and Implementation of Manufacturing Processes, Elsevier Science.Google Scholar

Jang, J. D. & Barford, J. P. (2000), ‘An unstructured kinetic model of macromolecular metabolism in batch and fed-batch cultures of hybridoma cells producing monoclonal antibody’, Biochemical Engineering Journal 4(2), 153–168.Google Scholar

Janoschek, S., Schulze, M., Zijlstra, G., Greller, G. & Matuszczyk, J. (2018), ‘A protocol to transfer a fed-batch platform process into semi-perfusion mode: The benefit of automated small scale bioreactors compared to shake flasks as scale-down model’, Biotechnology Progress 35(2), 8–10.Google Scholar

Jefferis, R. (2005), ‘Glycosylation of recombinant antibody therapeutics’, Biotechnology Progress 21(1), 11–16.Google Scholar

Jefferis, R. (2009), ‘Recombinant antibody therapeutics: The impact of glycosylation on mechanisms of action’, Trends in Pharmacological Sciences 30(7), 356–362.Google Scholar

Jesus, M. D. & Wurm, F. M. (2011), ‘Manufacturing recombinant proteins in kg-ton quantities using animal cells in bioreactors’, European Journal of Pharmaceutics and Biopharmaceutics 78(2), 184–188.Google Scholar

Jiang, M., Severson, K. A., Love, J. C., Madden, H., Swann, P., Zang, L. & Braatz, R. D. (2017), ‘Opportunities and challenges of real-time release testing in biopharmaceutical manufacturing’, Biotechnology and Bioengineering 114(11), 2445–2456.Google Scholar

Jiang, R., Hoesli, N., Mueller, R., Kretz, T., Chen, H., Xu, S. & Bowers, J. (2018), ‘Probing lactate metabolism variations in large-scale bioreactors’, Biotechnology Progress 34(3), 756–766.Google Scholar

Jimenez del Val, I., Nagy, J. M. & Kontoravdi, C. (2011), ‘A dynamic mathematical model for monoclonal antibody N-linked glycosylation and nucleotide sugar donor transport within a maturing Golgi apparatus’, Biotechnology Progress 27(6), 1730–1743.Google Scholar

Joao De Jesus, M. & Wurm, F. M. (2013), ‘Scale-up and predictability in process development with suspension cultures of mammalian cells for recombinant protein manufacture: comments on a trend reversal’, Pharmaceutical Bioprocessing 1(4), 1–3.Google Scholar

Joeris, K., Frerichs, J.-G., Konstantinov, K. & Scheper, T. (2002), ‘In-situ microscopy: Online process monitoring of mammalian cell cultures’, Cytotechnology 38(1–3), 129–134.Google Scholar

Jolliffe, I. (2005), ‘Principal component analysis’, in Encyclopedia of Statistics in Behavioral Science, John Wiley and Sons.Google Scholar

Jordan, M. & Jenkins, N. (2007), ‘Tools for high-throughput medium and process optimization’, Methods in Biotechnology 24, 193–202.Google Scholar

Jordan, M., Kinnon, N. M., Monchois, V., Stettler, M. & Broly, H. (2018), ‘Intensification of large-scale cell culture processes’, Current Opinion in Chemical Engineering 22, 253–257.Google Scholar

Jordan, M., Voisard, D., Berthoud, A. & Tercier, L. (2012), ‘Cell culture medium improvement by rigorous shuffling of components using media blending’, Cytotechnology 65(1), 31–40.Google Scholar

Karst, D. J., Scibona, E., Serra, E., Bielser, J.-M. M., Souquet, J., Stettler, M., Broly, H., Soos, M., Morbidelli, M. & Villiger, T. K. (2017b), ‘Modulation and modeling of monoclonal antibody N-linked glycosylation in mammalian cell perfusion reactors’, Biotechnology and Bioengineering 114(9), 1–37.Google Scholar

Karst, D. J., Serra, E., Villiger, T. K., Soos, M. & Morbidelli, M. (2016), ‘Characterization and comparison of ATF and TFF in stirred bioreactors for continuous mammalian cell culture processes’, Biochemical Engineering Journal 110, 17–26.Google Scholar

Karst, D. J., Steinebach, F. & Morbidelli, M. (2018), ‘Continuous integrated manufacturing of therapeutic proteins’, Current Opinion in Biotechnology 53, 76–84.Google Scholar

Karst, D. J., Steinebach, F., Soos, M. & Morbidelli, M. (2017a), ‘Process performance and product quality in an integrated continuous antibody production process’, Biotechnology and Bioengineering 114(2), 298–307.Google Scholar

Karst, D. J., Steinhoff, R. F., Kopp, M. R. G., Serra, E., Soos, M., Zenobi, R. & Morbidelli, M. (2017c), ‘Intracellular CHO cell metabolite profiling reveals steady-state dependent metabolic fingerprints in perfusion culture’, Biotechnology Progress 33(4), 879–890.Google Scholar

Karst, D. J., Steinhoff, R. F., Kopp, M. R., Soos, M., Zenobi, R. & Morbidelli, M. (2017d), ‘Isotope labeling to determine the dynamics of metabolic response in CHO cell perfusion bioreactors using MALDI-TOF-MS’, Biotechnology Progress 33(6), 1630–1639.Google Scholar

Kaufmann, H., Mazur, X., Fussenegger, M. & Bailey, J. E. (1999), ‘Influence of low temperature on productivity, proteome and protein phosphorylation of CHO cells’, Biotechnology and Bioengineering 63(5), 573–582.Google Scholar

Kawase, Y., Halard, B. & Moo-Young, M. (1992), ‘Liquid-phase mass transfer coefficients in bioreactors’, Biotechnology and Bioengineering 39(11), 1133–1140.Google Scholar

Kelly, P. S., McSweeney, S., Coleman, O., Carillo, S., Henry, M., Chandran, D., Kellett, A., Bones, J., Clynes, M., Meleady, P. & Barron, N. (2016), ‘Process-relevant concentrations of the leachable bDtBPP impact negatively on CHO cell production characteristics’, Biotechnology Progress 32(6), 1547–1558.Google Scholar

Kelly, W. J. (2008), ‘Using computational fluid dynamics to characterize and improve bioreactor performance’, Biotechnology and Applied Biochemistry 49(4), 225.Google Scholar

Kelly, W., Scully, J., Zhang, D., Feng, G., Lavengood, M., Condon, J., Knighton, J. & Bhatia, R. (2014), ‘Understanding and modeling alternating tangential flow filtration for perfusion cell culture’, Biotechnology Progress 30(6), 1291–1300.Google Scholar

Kettaneh, N., Berglund, A. & Wold, S. (2005), ‘PCA and PLS with very large data sets’, Computational Statistics and Data Analysis 48(1), 69–85.Google Scholar

Khawli, L. A., Goswami, S., Hutchinson, R., Kwong, Z. W., Yang, J., Wang, X., Yao, Z., Sreedhara, A., Cano, T., Tesar, D., Nijem, I., Allison, D. E., Wong, P. Y., Kao, Y. H., Quan, C., Joshi, A., Harris, R. J. & Motchnik, P. (2010), ‘Charge variants in IgG1: Isolation, characterization, in vitro binding properties and pharmacokinetics in rats’, mAbs 2(6), 613–624.Google Scholar

Kimura, R. & Miller, W. M. (1996), ‘Effects of elevated pCO(2) and/or osmolality on the growth and recombinant tPA production of CHO cells.’, Biotechnology and Bioengineering 52(1), 152–160.3.0.CO;2-Q>CrossRefGoogle ScholarPubMed

Kiparissides, A., Koutinas, M., Kontoravdi, C., Mantalaris, A. & Pistikopoulos, E. N. (2011), ‘Closing the loop’ in biological systems modeling: From the in silico to the in vitro’, Automatica 47(6), 1147–1155.Google Scholar

Kirdar, A. O., Chen, G., Weidner, J. & Rathore, A. S. (2010), ‘Application of near-infrared (NIR) spectroscopy for screening of raw materials used in the cell culture medium for the production of a recombinant therapeutic protein’, Biotechnology Progress 26(2), 527–531.Google Scholar

Kiviharju, K., Salonen, K., Moilanen, U. & Eerikäinen, T. (2008), ‘Biomass measurement online: The performance of in situ measurements and software sensors’, Journal of Industrial Microbiology and Biotechnology 35(7), 657–665.Google Scholar

Klutz, S., Holtmann, L., Lobedann, M. & Schembecker, G. (2016), ‘Cost evaluation of antibody production processes in different operation modes’, Chemical Engineering Science 141, 63–74.Google Scholar

Klutz, S., Magnus, J., Lobedann, M., Schwan, P., Maiser, B., Niklas, J., Temming, M. & Schembecker, G. (2015), ‘Developing the biofacility of the future based on continuous processing and single-use technology’, Journal of Biotechnology 213, 120–130.Google Scholar

Kochanowski, N., Blanchard, F., Cacan, R., Chirat, F., Guedon, E., Marc, A. & Goergen, J. L. (2008), ‘Influence of intracellular nucleotide and nucleotide sugar contents on recombinant interferon-γ glycosylation during batch and fed-batch cultures of CHO cells’, Biotechnology and Bioengineering 100(4), 721–733.Google Scholar

Kohrt, H. E., Tumeh, P. C., Benson, D., Bhardwaj, N., Brody, J., Formenti, S., Fox, B. A., Galon, J., June, C. H., Kalos, M., Kirsch, I., Kleen, T., Kroemer, G., Lanier, L., Levy, R., Lyerly, H. K., Maecker, H., Marabelle, A., Melenhorst, J., Miller, J., Melero, I., Odunsi, K., Palucka, K., Peoples, G., Ribas, A., Robins, H., Robinson, W., Serafini, T., Sondel, P., Vivier, E., Weber, J., Wolchok, J., Zitvogel, L., Disis, M. L. & Cheever, M. A. (2016), ‘Immunodynamics: A cancer immunotherapy trials network review of immune monitoring in immuno-oncology clinical trials’, Journal for ImmunoTherapy of Cancer 4(1), 1–16.Google Scholar

Kolwyck, D., Mcsweeney, M. & Johns, J. (2017), Biomanufacturing Technology Roadmap: Supply Partnership Management, technical report, BioPhorum Operations Group Ltd.Google Scholar

Konstantinov, K. B. & Cooney, C. L. (2015), ‘White paper on continuous bioprocessing May 20–21, 2014 continuous manufacturing symposium’, Journal of Pharmaceutical Sciences 104(3), 813–820.Google Scholar

Konstantinov, K. B., Yeong-shou, Tsai, Moles, D. & Matanguihan, R. (1996), ‘Control of long-term perfusion Chinese hamster ovary cell culture by glucose auxostat’, Biotechnology Progress 12(1), 100–109.Google Scholar

Konstantinov, K., Chuppa, S., Sajan, E., Tsai, Y., Yoon, S. & Golini, F. (1994), ‘Real-time biomass-concentration monitoring in animal-cell cultures’, Trends in Biotechnology 12(8), 324–333.Google Scholar

Konstantinov, K., Goudar, C., Ng, M., Meneses, R., Thrift, J., Chuppa, S., Matanguihan, C., Michaels, J. & Naveh, D. (2006), ‘The “push-to-low” approach for optimization of high-density perfusion cultures of animal cells’, Advances in Biochemical Engineering/Biotechnology 101(July), 75–98.Google Scholar

Kontoravdi, C., Pistikopoulos, E. N. & Mantalaris, A. (2010), ‘Systematic development of predictive mathematical models for animal cell cultures’, Computers and Chemical Engineering 34(8), 1192–1198.Google Scholar

Krambeck, F. J. & Betenbaugh, M. J. (2005), ‘A mathematical model of N-linked glycosylation’, Biotechnology and Bioengineering 92(6), 711–728.Google Scholar

Krättli, M., Müller-Späth, T. & Morbidelli, M. (2013), ‘Multifraction separation in countercurrent chromatography (MCSGP).’, Biotechnology and Bioengineering 110(9), 2436– 2444.Google Scholar

Kratzer, R., Dorn, I., Mcnaull, S., Rode, C., Lilly, E., Shea, L. O., Campbell, C. & Diluzio, W. (2017), Biomanufacturing Technology Roadmap: Process Technologies, technical report, BioPhorum Operations Group Ltd.Google Scholar

Kreye, S., Stahn, R., Nawrath, K., Danielczyk, A., Goletz, S. & Gmbh, G. (2015), ‘GlycoExpress: A toolbox for the high yield production of glycooptimized fully human biopharmaceuticals in perfusion bioreactors at different scales’, in ECI Digital Archives.Google Scholar

Kumar, N., Bansal, A., Sarma, G. & Rawal, R. K. (2014), ‘Chemometrics tools used in analytical chemistry: An overview’, Talanta 123, 186–199.Google Scholar

Kunkel, J. P., Jan, D. C., Butler, M. & Jamieson, J. C. (2000), ‘Comparisons of the glycosylation of a monoclonal antibody produced under nominally identical cell culture conditions in two different bioreactors’, Biotechnology Progress 16(3), 462–470.Google Scholar

Kunkel, J. P., Jan, D. C., Jamieson, J. C. & Butler, M. (1998), ‘Dissolved oxygen concentration in serum-free continuous culture affects N-linked glycosylation of a monoclonal antibody’, Journal of Biotechnology 62, 55–71.Google Scholar

Lai, T., Yang, Y. & Ng, S. K. (2013), ‘Advances in mammalian cell line development technologies’, Pharmaceuticals 6, 579–603.Google Scholar

Lairson, L., Henrissat, B., Davies, G. & Withers, S. (2008), ‘Glycosyltransferases: Structures, functions, and mechanisms’, Annual Review of Biochemistry 77(1), 521–555.Google Scholar

Lameris, R., de Bruin, R. C., Schneiders, F. L., van, Henegouwen, Bergen en, Verheul, P. M., de Gruijl, H. M., van der Vliet, T. D. H. J. (2014), ‘Bispecific antibody platforms for cancer immunotherapy’, Critical Reviews in Oncology/Hematology 92(3), 153–165.CrossRefGoogle ScholarPubMed

Langer, E. S. (2011), ‘Trends in perfusion bioreactors: The next revolution in bioprocessing?’, BioProcess International 9(10), 18–22.Google Scholar

Langer, E. S. (2014), ‘Continuous bioprocessing and perfusion: Wider adoption coming as bioprocessing matures’, BioProcessing Journal 13(1), 43–49.Google Scholar

Lavery, M. & Nienow, A. W. (1987), ‘Oxygen transfer in animal cell culture medium’, Biotechnology and Bioengineering 30(3), 368–373.Google Scholar

Le, K., Tan, C., Gupta, S., Guhan, T., Barkhordarian, H., Lull, J., Stevens, J. & Munro, T. (2018), ‘A novel mammalian cell line development platform utilizing nanofluidics and optoelectro positioning technology’, Biotechnology Progress 34(6), 1438–1446.Google Scholar

Li, J., Wong, C. L., Vijayasankaran, N., Hudson, T. & Amanullah, A. (2012), ‘Feeding lactate for CHO cell culture processes: Impact on culture metabolism and performance’, Biotechnology and Bioengineering 109(5), 1173–1186.Google Scholar

Lim, Y., Wong, N. S. C., Lee, Y. Y., Ku, S. C. Y., Wong, D. C. F. & Yap, M. G. S. (2010), ‘Engineering mammalian cells in bioprocessing: Current achievements and future perspectives’, Biotechnology and Applied Biochemistry 55(4),175–189.Google Scholar

Lin, H., Leighty, R. W., Godfrey, S. & Wang, S. B. (2017), ‘Principles and approach to developing mammalian cell culture media for high cell density perfusion process leveraging established fed-batch media’, Biotechnology Progress 33(4), 891–901.Google Scholar

Ling, W. L. (2015), ‘Development of protein-free medium for therapeutic protein production in mammalian cells: Recent advances and perspectives’, Pharmaceutical Bioprocessing 3, 215–226.Google Scholar

Lobban, P. (1972), An Enzymatic Method for End-to-End Joining of DNA Molecules, PhD thesis, Stanford University.Google Scholar

Lobban, P. & Kaiser, A. (1973), ‘Enzymatic end-to-end joining of DNA molecules’, Journal of Molecular Biology 78, 483–471.Google Scholar

Löffelholz, C., Kaiser, S. C., Kraume, M., Eibl, R. & Eibl, D. (2014), ‘Dynamic single-use bioreactors used in modern liter- and m3- scale biotechnological processes: Engineering characteristics and scaling up’, Advances in Biochemical Engineering/Biotechnology 138, 1–44.Google Scholar

Long, Q., Liu, X., Yang, Y., Li, L., Harvey, L., McNeil, B. & Bai, Z. (2014), ‘The development and application of high throughput cultivation technology in bioprocess development’, Journal of Biotechnology 192, 323–338.Google Scholar

Losfeld, M.-E., Scibona, E., Lin, C.-W., Villiger, T. K., Gauss, R., Morbidelli, M. & Aebi, M. (2017), ‘Influence of protein/glycan interaction on site-specific glycan heterogeneity’, The FASEB Journal 31(10), 4623–4635.Google Scholar

Luo, Y. & Chen, G. (2007), ‘Combined approach of NMR and chemometrics for screening peptones used in the cell culture medium for the production of a recombinant therapeutic protein’, Biotechnology and Bioengineering 97(6), 1654–1659.Google Scholar

Luttmann, R., Borchert, S. O., Mueller, C., Loegering, K., Aupert, F., Weyand, S., Kober, C., Faber, B. & Cornelissen, G. (2015), ‘Sequential/parallel production of potential Malaria vaccines: A direct way from single batch to quasi-continuous integrated production’, Journal of Biotechnology 213, 83–96.Google Scholar

Luttmann, R., Bracewell, D. G., Cornelissen, G., Gernaey, K. V., Glassey, J., Hass, V. C., Kaiser, C., Preusse, C., Striedner, G. & Mandenius, C. (2012), ‘Soft sensors in bioprocessing: A status report and recommendations’, Biotechnology Journal 7(8), 1040–1048.Google Scholar

Ma, N., Mollet, M. & Chalmers, J. J. (2003), ‘Aeration, mixing and hydrodynamics in bioreactors’, in Encyclopedia of Cell Technology, John Wiley and Sons, Inc., Hoboken, pp. 225–248.Google Scholar

Manchester, K. L. (2007), ‘Louis Pasteur, fermentation, and a rival’, South African Journal of Science 103(9–10), 377–380.Google Scholar

Marks, D. M. (2003), ‘Equipment design considerations for large scale cell culture’, Cytotechnology 42(1), 21–33.Google Scholar

Matthews, T. E., Berry, B. N., Smelko, J., Moretto, J., Moore, B. & Wiltberger, K. (2016), ‘Closed loop control of lactate concentration in mammalian cell culture by Raman spectroscopy leads to improved cell density, viability, and biopharmaceutical protein production’, Biotechnology and Bioengineering 113(11), 2416–2424.Google Scholar

McCoy, R. E., Costa, N. a. & Morris, A. E. (2015), ‘Factors that determine stability of highly concentrated chemically defined production media’, Biotechnology Progress 31(2), 493–502.Google Scholar

McCracken, N. A., Kowle, R. & Ouyang, A. (2014), ‘Control of galactosylated glycoforms distribution in cell culture system’, Biotechnology Progress 30(3), 547–553.Google Scholar

McGovern, P. E., Glusker, D. L., Exner, L. J. & Voigt, M. M. (1996), ‘Neolithic resinated wine’, Nature 381, 480–481.Google Scholar

McGovern, P. E., Zhang, J., Tang, J., Zhang, Z., Hall, G. R., Moreau, R. A., Nunez, A., Butrym, E. D., Richards, M. P., Wang, C.-S., Cheng, G., Zhao, Z. & Wang, C. (2004), ‘Fermented beverages of pre- and proto-historic China’, Proceedings of the National Academy of Sciences 101(51), 17593–17598.Google Scholar

Meglen, R. R. (1992), ‘Examining large databases: A chemometric approach using principal component analysis’, Marine Chemistry 39(1–3), 217–237.Google Scholar

Mehdizadeh, H., Lauri, D., Karry, K. M., Moshgbar, M., Procopio-Melino, R. & Drapeau, D. (2015), ‘Generic Raman-based calibration models enabling real-time monitoring of cell culture bioreactors’, Biotechnology Progress 31(4), 1004–1013.Google Scholar

Meier, S. J., Hatton, T. A. & Wang, D. I. (1999), ‘Cell death from bursting bubbles: Role of cell attachment to rising bubbles in sparged reactors’, Biotechnology and Bioengineering 62(4), 468–478.Google Scholar

Mercier, S. M., Diepenbroek, B., Wijffels, R. H. & Streefland, M. (2014), ‘Multivariate PAT solutions for biopharmaceutical cultivation: current progress and limitations’, Trends in Biotechnology 32(6), 329–336.Google Scholar

Mercier, S. M., Rouel, P. M. & Lebrun, P. (2016), ‘Process analytical technology tools for perfusion cell culture’, Engineering in Life Sciences 16(1), 25–35.Google Scholar

Mercille, S., Johnson, M., Lanthier, S., Kamen, A. A. & Messie, B. (2000), ‘Understanding factors that limit the productivity of suspension-based perfusion cultures operated at high medium renewal rates’, Biotechnology and Bioengineering 67(4), 435–450.Google Scholar

Mertz, J. E. & Davis, R. (1972), ‘Cleavage of DNA by RI restriction endonuclease generates cohesive ends’, Proceedings of the National Academy of Sciences of the United States of America 69(11), 3370–3374.Google Scholar

Meuwly, F., Weber, U., Ziegler, T., Gervais, A., Mastrangeli, R., Crisci, C., Rossi, M., Bernard, A., von Stockar, U. & Kadouri, A. (2006), ‘Conversion of a CHO cell culture process from perfusion to fed-batch technology without altering product quality’, Journal of Biotechnology 123(1), 106–116.Google Scholar

Miller, W. M., Blanch, H. W. & Wilke, C. R. (1988), ‘A kinetic analysis of hybridoma growth and metabolism in batch and continuous suspension culture: effect of nutrient concentration, dilution rate, and pH’, Biotechnology and Bioengineering 32(8), 947–965.Google Scholar

Miller, W. M., Wilke, C. R. & Blanch, H. W. (1987), ‘Effects of dissolved oxygen concentration on hybridoma growth and metabolism in continuous culture’, Journal of Cellular Physiology 132(3), 524–530.Google Scholar

Mokuolu, S. (2018), ‘New standards define single-use materials qualification’, Pharmaceutical Technology 42(2), 52–53.Google Scholar

Monteil, D. T., Juvet, V., Paz, J., Moniatte, M., Baldi, L., Hacker, D. L. & Wurm, F. M. (2016), ‘A comparison of orbitally-shaken and stirred-tank bioreactors: pH modulation and bioreactor type affect CHO cell growth and protein glycosylation’, BiotechnologyGoogle Scholar

Morari, M. & Zafiriou, E. (1989), Robust Process Control. Prentice Hall.Google Scholar

Morrow, J., Cohen, S. N., Chang, A. C., Boyer, H. W. & Goodman, H. M. (1974), ‘Replication and transcription of eukaryotic DNA in Escherichia coli’, Proceedings of the National Academy of Sciences of the United States of America 71(5), 1743–1747.Google Scholar

Moussa, A. S., Soos, M., Sefcik, J. & Morbidelli, M. (2007), ‘Effect of solid volume fraction on aggregation and breakage in colloidal suspensions in batch and continuous stirred tanks’, Langmuir 23(4), 1664–1673.Google Scholar

Moyle, D. (2017), Biomanufacturing Technology Roadmap: Modular and Mobile, Technical report, BioPhorum Operations Group Ltd.Google Scholar

Mulukutla, B. C., Gramer, M. & Hu, W. S. (2012), ‘On metabolic shift to lactate consumption in fed-batch culture of mammalian cells’, Metabolic Engineering 14(2), 138–149.Google Scholar

Narayanan, H., Luna, M., von Stoch, M., Cruz Bournazou, M., Polotti, G., Morbidelli, M., Butté, A. & Sokolov, M. (2019a), ‘Bioprocess in the digital age: The role of process models’, Biotechnology Journal 15(1), https://doi.org/10.1002/biot.201900172.Google Scholar

Narayanan, H., Sokolov, M., Butté, A. & Morbidelli, M. (2019b), ‘Decision Tree-PLS (DT-PLS) algorithm for the development of process: Specific local prediction models’, Biotechnology Progress 35(4), e2818.Google Scholar

Narayanan, H., Sokolov, M., Morbidelli, M. & Butté, A. (2019c), ‘A new generation of predictive models: The added value of hybrid models for manufacturing processes of therapeutic proteins’, Biotechnology and Bioengineering 116(10), 2540–2549.Google Scholar

Nasr, M. M., Krumme, M., Matsuda, Y., Trout, B. L., Badman, C., Mascia, S., Cooney, C. L., Jensen, K. D., Florence, A., Johnston, C., Konstantinov, K. & Lee, S. L. (2017), ‘Regulatory perspectives on continuous pharmaceutical manufacturing: Moving from theory to practice, September 26–27, 2016, International Symposium on the Continuous Manufacturing of Pharmaceuticals’, Journal of Pharmaceutical Sciences 106(11), 3199–3206.Google Scholar

Neunstoecklin, B., Stettler, M., Solacroup, T., Broly, H., Morbidelli, M. & Soos, M. (2015), ‘Determination of the maximum operating range of hydrodynamic stress in mammalian cell culture’, Journal of Biotechnology 194, 100–109.CrossRefGoogle ScholarPubMed

Neunstoecklin, B., Villiger, T. K., Lucas, E., Stettler, M., Broly, H., Morbidelli, M. & Soos, M. (2016), ‘Pilot-scale verification of maximum tolerable hydrodynamic stress for mammalian cell culture’, Applied Microbiology and Biotechnology 100(8), 3489–3498.Google Scholar

Nienow, A. W. (1997), ‘On impeller circulation and mixing effectiveness in the turbulent flow regime’, Chemical Engineering Science 52(15), 2557–2565.Google Scholar

Nienow, A. W. (1998), ‘Hydrodynamics of stirred bioreactors’, Applied Mechanics Reviews 51(1), 3–32.Google Scholar

Nienow, A. W. (2006), ‘Reactor engineering in large scale animal cell culture’, Cytotechnology 50(1–3), 9–33.Google Scholar

Nienow, A. W. (2010), ‘Impeller selection for animal cell culture’, in Encyclopedia of Industrial Biotechnology, American Cancer Society, pp. 1–25.Google Scholar

Nienow, A. W., Rielly, C. D., Brosnan, K., Bargh, N., Lee, K., Coopman, K. & Hewitt, C. J. (2013), ‘The physical characterisation of a microscale parallel bioreactor platform with an industrial CHO cell line expressing an IgG4’, Biochemical Engineering Journal 76, 25–36.Google Scholar

Opel, C. F., Li, J. & Amanullah, A. (2010), ‘Quantitative modeling of viable cell density, cell size, intracellular conductivity, and membrane capacitance in batch and fed-batch CHO processes using dielectric spectroscopy’, Biotechnology Progress 26(4), 1187–1199.Google Scholar

Ozturk, S. S. (1996), ‘Engineering challenges in high density cell culture systems’, Cytotechnology 22, 3–16.Google Scholar

Ozturk, S. S. (2014), ‘Opportunities and challenges for the implementation of continuous processing in biomanufacturing’, in Subramanian, G., ed., Continuous Processing in Pharmaceutical Manufacturing, Wiley-Blackwell, chapter 18, pp. 457–478.Google Scholar

Ozturk, S. S. & Hu, W.-S. (2006), Cell Culture Technology for Pharmaceutical and Cell-Based Therapies, Taylor and Francis.Google Scholar

Ozturk, S. S. & Kompala, D. S. (2006), ‘Optimization of high cell density perfusion bioreactors’, in Cell Culture Technology for Pharmaceutical and Cell-Based Therapies, Taylor and Francis Group, Boca Raton, pp. 387–416.Google Scholar

Ozturk, S. S. & Palsson, B. O. (1990), ‘Effects of dissolved oxygen on hybridoma cell growth, metabolism, and antibody production kinetics in continuous culture’, Biotechnology Progress 6(6), 437–446.Google Scholar

Ozturk, S. S. & Palsson, B. O. (1991), ‘Growth, metabolic, and antibody production kinetics of hybridoma cell culture: 2. Effects of serum concentration, dissolved oxygen concentration, and mediumpHin a batch reactor’, Biotechnology Progress 7(6), 481–494.Google Scholar

Pardee, A. B. (1989), ‘G1 events and regulation of cell proliferation’, Science 246(4930), 603–608.Google Scholar

Park, J. H., Noh, S. M., Woo, J. R., Kim, J. W. & Lee, G. M. (2015), ‘Valeric acid induces cell cycle arrest at G1 phase in CHO cell cultures and improves recombinant antibody productivity’, Biotechnology Journal 11(4), 487–496.Google Scholar

Pasteur, L. (1885), Mémoire sur la fermentation alcoolique, PhD thesis, Académie des sciences.Google Scholar

Pattison, R., Swamy, J., Mendenhall, B., Hwang, C. & Frohlich, B. (2000), ‘Measurement and control of dissolved carbon dioxide in mammalian cell culture processes using an in situ fiber optic chemical sensor’, Biotechnology Progress 16(5), 769–774.Google Scholar

Pfister, D., Nicoud, L. & Morbidelli, M. (2018), Continuous Biopharmaceutical Processes, Cambridge University Press.Google Scholar

Pham, P. L., Kamen, A. & Durocher, Y. (2006), ‘Large-scale transfection of mammalian cells for the fast production of recombinant protein’, Molecular Biotechnology 34(2), 225–237.Google Scholar

Pilkington, P. H., Margaritis, A., Mensour, N. A. & Russell, I. (1998), ‘Fundamentals of immobilised yeast cells for continuous beer fermentation: A review’, Journal of the Institute of Brewing 104(1), 19–31.Google Scholar

Pohlscheidt, M., Jacobs, M., Wolf, S., Thiele, J., Jockwer, A., Gabelsberger, J., Jenzsch, M., Tebbe, H. & Burg, J. (2013), ‘Optimizing capacity utilization by large scale 3000 L perfusion in seed train bioreactors’, Biotechnology Progress 29(1), 222–229.Google Scholar

Politis, S., Colombo, P., Colombo, G. & Rekkas, D. (2017), ‘Design of experiments (DoE) in pharmaceutical development’, Drug Development and Industrial Pharmacy 43(6), 889–901.Google Scholar

Pollock, J., Coffman, J., Ho, S. V. & Farid, S. S. (2017), ‘Integrated continuous bioprocessing: Economic, operational, and environmental feasibility for clinical and commercial antibody manufacture’, Biotechnology Progress 33(4), 854–866.Google Scholar

Pollock, J., Ho, S. V. & Farid, S. S. (2013), ‘Fed-batch and perfusion culture processes: Economic, environmental, and operational feasibility under uncertainty’, Biotechnology and Bioengineering 110(1), 206–219.Google Scholar

Pörtner, R. (2015), ‘Bioreactors for mammalian cells’, in Al-Rubeai, M., ed., Animal Cell Culture, Springer International Publishing, pp. 89–135.Google Scholar

Pörtner, R. & Schäfer, T. (1996), ‘Modelling hybridoma cell growth and metabolism a comparison of selected models and data’, Journal of Biotechnology 49(1–3), 119–135.Google Scholar

Radoniqi, F., Zhang, H., Bardliving, C. L., Shamlou, P. & Coffman, J. (2018), ‘Computational fluid dynamic modeling of alternating tangential flow filtration for perfusion cell culture’, Biotechnology and Bioengineering 115(11), 2751–2759.Google Scholar

Raghunath, B., Bin, W., Pattnaik, P. & Janssens, J. (2013), ‘Best practices for optimization and scale-up of microfiltration TFF processes’, BioProcessing Journal 11(1), 30–40.Google Scholar

Ramakrishnan, B., Boeggeman, E., Ramasamy, V. & Qasba, P. K. (2004), ‘Structure and catalytic cycle of β-1,4-galactosyltransferase’, Current Opinion in Structural Biology 14(5), 593–600.Google Scholar

Ranganathan, P. & Sivaraman, S. (2011), ‘Investigations on hydrodynamics and mass transfer in gas–liquid stirred reactor using computational fluid dynamics’, Chemical Engineering Science 66(14), 3108–3124.Google Scholar

Rathore, A. S. (2009), ‘Roadmap for implementation of quality by design (QbD) for biotechnology products’. Trend in Biotechnology, 27(9), 546–553, https://doi.org/10.1016/ j.tibtech.2009.06.006.Google Scholar

Rathore, A. S. (2014), ‘QbD/PAT for bioprocessing: Moving from theory to implementation’. Current Opinion in Chemical Engineering, 6, 1–8, https://doi.org/10.1016/j.coche.2014.05 .006.Google Scholar

Rathore, A. S., Kateja, N. & Kumar, D. (2018), ‘Process integration and control in continuous bioprocessing’, Current Opinion in Chemical Engineering 22, 18–25.Google Scholar

Rathore, A. S., Pathak, M. & Godara, A. (2016), ‘Process development in the QbD paradigm: Role of process integration in process optimization for production of biotherapeutics’, Biotechnology Progress 32(2), 355–362.Google Scholar

Rathore, A. S. & Winkle, H. (2009), ‘Quality by design for biopharmaceuticals’, Nature 27(1), 26–34.Google Scholar

Read, E., Park, J., Shah, R., Riley, B., Brorson, K. & Rathore, A. (2010a), ‘Process analytical technology (PAT) for biopharmaceutical products: Part I. Concepts and applications’, Biotechnology and Bioengineering 105(2), 276–284.Google Scholar

Read, E., Shah, R., Riley, B., Park, J., Brorson, K. & Rathore, A. (2010b), ‘Process analytical technology (PAT) for biopharmaceutical products: Part II. Concepts and applications’, Biotechnology and Bioengineering 105(2), 285–295.Google Scholar

Reinhart, D., Damjanovic, L., Kaisermayer, C. & Kunert, R. (2015), ‘Benchmarking of commercially available CHO cell culture media for antibody production’, Applied Microbiology and Biotechnology 99(11), 4645–4657.Google Scholar

Rivinoja, A., Hassinen, A., Kokkonen, N., Kauppila, A. & Kellokumpu, S. (2009), ‘Elevated Golgi pH impairs terminal N-glycosylation by inducing mislocalization of Golgi glycosyltransferases’, Journal of Cellular Physiology 220(1), 144–154.Google Scholar

Rodrigues, M. E., Costa, A. R., Henriques, M., Azeredo, J. & Oliveira, R. (2010), ‘Technological progresses in monoclonal antibody production systems’, Biotechnology Progress 26(2), 332–351.Google Scholar

Rouiller, Y., Bielser, J.-M., Brühlmann, D., Jordan, M., Broly, H. & Stettler, M. (2016), ‘Screening and assessment of performance and molecule quality attributes of industrial cell lines across different fed-batch systems’, Biotechnology Progress 32(1), 160–170.Google Scholar

Rouiller, Y., Périlleux, A., Collet, N., Jordan, M., Stettler, M. & Broly, H. (2013), ‘A high-throughput media design approach for high performance mammalian fed-batch cultures’, mAbs 5(3), 501–511.Google Scholar

Rouiller, Y., Solacroup, T., Deparis, V., Barbafieri, M., Gleixner, R., Broly, H. & Eon-Duval, A. (2012), ‘Application of quality by design to the characterization of the cell culture process of an Fc-fusion protein’, European Journal of Pharmaceutics and Biopharmaceutics 81(2), 426–437.Google Scholar

Routledge, S. J. (2012), ‘Beyond de-foaming: The effects of antifoams on bioprocess productivity’, Computational and Structural Biotechnology Journal 3(4), e201210001.Google Scholar

Roy, J. (2009), ‘Glycosylation of antibody therapeutics: Optimisation for purpose’, in Methods in Molecular Biology, Vol. 483, pp. 223–238.Google Scholar

Roychoudhury, P., O’Kennedy, R., McNeil, B. & Harvey, L. M. (2007), Analytica Chimica Acta 590(1), 110–117.Google Scholar

Running, J. A. & Bansal, K. (2016), ‘Oxygen transfer rates in shaken culture vessels from Fernbach flasks to microtiter plates’, Biotechnology and Bioengineering 113(8), 1729–1735.Google Scholar

Rutherford, K., Mahmoudi, S. M. S., Lee, K. C. & Yianneskis, M. (1996), ‘The influence of Rushton impeller blade and disk thickness on the mixing characteristics of stirred vessels’, Chemical Engineering Research and Design 74(3), 369–378.Google Scholar

Ryan, P. W., Li, B., Shanahan, M., Leister, K. J. & Ryder, A. G. (2010), ‘Prediction of cell culture media performance using fluorescence spectroscopy’, Analytical Chemistry 82(4), 1311–1317.Google Scholar

Saha, D., Soos, M., Lüthi, B., Holzner, M., Liberzon, A., Babler, M. U. & Kinzelbach, W. (2014), ‘Experimental characterization of breakage rate of colloidal aggregates in axisymmetric extensional flow’, Langmuir 30(48), 14385–14395.Google Scholar

Sajjadi, S. & Yianneskis, M. (2003), ‘Semibatch emulsion polymerization of methyl methacrylate with a neat monomer feed’, Polymer Reaction Engineering 11(4), 715–736.Google Scholar

Sano, C. (2009), ‘History of glutamate production’, American Journal of Clinical Nutrition 90(3), 728–732.Google Scholar

Sawyer, D., Sanderson, K., Lu, R., Daszkowski, T., Clark, E., Mcduff, P., Astrom, J., Heffernan, C., Duffy, L., Poole, S., Ryll, T., Sheehy, P., Strachan, D., Souquet, J., Beattie, D., Pollard, D., Stauch, O., Bezy, P., Sauer, T., Boettcher, L., Simpson, C., Dakin, J., Pitt, S. & Boyle, A. (2017a), Biomanufacturing Technology Roadmap: Overview, Technical report, BioPhorum Operations Group Ltd.Google Scholar

Sawyer, D., Sanderson, K., Lu, R., Daszkowski, T., Clark, E., Mcduff, P., Heffernan, C., Duffy, L., Poole, S., Ryll, T., Sheehy, P., Strachan, D., Beattie, D., Souquet, J., Pollard, D., Stauch, O., Bezy, P., Sauer, T., Boettcher, L., Simpson, C., Dakin, J., Pitt, S. & Boyle, A. (2017b), Biomanufacturing Technology Roadmap: Executive Summary, Technical report, BioPhorum Operations Group Ltd.Google Scholar