Inhabitants of a land that their ancient myths proclaimed to be the creation of divinities, the Japanese have peopled their archipelago with numerous earth gods: giants trees, simple pebbles concealed either in an oratory, a corner of a garden or deep inside a thicket; crossroads stoneposts, steles in the middle of a plot or next to a rice field, tombstones, and rocks that are worshipped on home altars. The imposing presence of these divine proprietors of the provinces and of sites that were once urban settlements, villages, or private residences is still visible in the tall buildings of Tokyo and Osaka. These protean spirits, found on roof tops in the form of stone foxes or redwood porticos, bear witness, even in the heart of the city, to a latent belief: the forces of the earth are still at work in the world, keeping watch over human activities. Although there are very few people left who believe, as the ancients stories tell, that the citizens of Japan are descendants of the gods of the earth and sky, there nevertheless remain many who accept the notion that a single telluric energy inhabits the world of the living, the dead, things, and the gods.

The Mecca Quarry Shale Member from Velpen, Indiana contains abundant vanadium which occurs in solid solution within illite-rich illite-smectite (I-S) having an average content of 1.65 wt. % V, and an overall composition of K0.8(Al2.8Mg0.5Fe0.4V0.3)(Si7.2Al0.8 g)O20(OH)4, analogous to the V-rich dioctahedral mica, roscoelite. The illite contains more than twice as much V as the associated kerogen. Detrital mica has a composition typical of 2M1, muscovite and contains no vanadium. The V-rich illite has a structure and composition typical of formation during normal prograde diagenesis and probably is widespread in the Mecca Quarry Shale because the bed is enriched in V throughout the Midwest. The smectite-to-illite reaction can not be a result of passive burial metamorphism because the host strata were buried no deeper than ~0.5 km at Velpen. The formation of illite occurred in unlithified sediments at shallow depths under the influence of pervasive 80–110°C basinal brines, possibly the same fluids that were responsible for the Mississippi Valley-type lead-zinc mineralization common in the Midwest. The presence of two types of K-rich phyllosilicates may be part of the reason for the lack of correlation between bulk V concentrations and the intensities of X-ray diffraction peaks of illite reported by others.

Submicron-sized (~3–60 nm) powders of Al-substituted magnetite were synthesized in the laboratory by precipitation methods by mixing appropriate molar volumes FeCl2, FeCl3 and AlCl3 solutions and precipitating with 20% NH4OH. Precipitates were dialyzed for 48 hr to remove excess salts and then freeze-dried. The nominal Al mole fractions [Als = Al/(Al + Fe)] in the initial precipitate ranged from 0.001 to 0.42. Portions of the resulting powders were heated sequentially in air at 400° and 500°C. Powders were examined using X-ray diffraction (XRD), transmission electron microscopy (TEM), and visible and near-IR reflectance spectroscopy. Solubilities were determined in ammonium oxalate (pH = 3) and dithionite-citrate-bicarbonate (DCB) solutions. As determined by XRD, the mineralogy of precipitated powder samples was predominantly magnetite. Powders having Als > 0.20 contained minor goethite and a poorly crystalline iron oxide phase (ferrihydrite?), and powders having Als > 0.25 also contained gibbsite. The color of the magnetites was black throughout the range of Al-substitution. Powders heated to 400°C were reddish brown; Munsell colors ranged from 5R 2/2 to 10R 3/4 for Als from 0.1–41.5%, respectively. By XRD, these powders were maghemite, but hematite was also detected by Mössbauer spectroscopy. XRD and Mössbauer data indicate powders heated to 500°C are hematite; their Munsell colors are not noticeably different from the corresponding 400°C samples. Mean crystallite dimensions (MCDs) of the magnetite powders increase with the Al mole fraction from ~10 nm for Als = 0.001% to a maximum value of 35 nm for Als = 0.15 and decrease slightly with further increasing Al substitution. Heating magnetite powders to 400°C did not change the MCDs significantly. Heating to 500°C resulted in hematites having MCDs larger than those for corresponding precursor magnetites for Als < 0.10. The opposite is true for hematites derived from magnetites having Als > 0.10. For hematite powders with Als > 0.05, MCD decreased with increasing Al-substitution. Solubilities of powders in oxalate solutions were independent of Al content and decreased in the order unheated samples (mostly magnetite) >400°C-heated samples (maghemite + hematite) >500°C-heated samples (hematite). All powders dissolved completely in DCB. The low crystallinity of the magnetite powders and the presence of ferrous iron are responsible for their relatively high solubility in oxalate solutions.

Samples of ash layers and associated background sediments from Site 808 of ODP Leg 131 in the Nankai Trough accretionary prism were analyzed for changes in mineralogy, porosity and micro-fabric associated with alteration of volcanic ash. Ash layers range from incipient stages of alteration and dissolution to complete alteration to clay minerals and clinoptilolite. Ash layers contain greater abundances of total clay minerals and lower percentages of quartz than do surrounding background hemipelagic sediments. The clay-sized fraction of ash layers is dominated by pure dioctahedral smectite, whereas the background sediments contain primarily illite and chlorite with minor amounts of smectite. Analysis of microfabric revealed dramatic changes in the distributions and abundances of grains and pores during ash alteration. The relative abundances of large pores, grains, and matrix material were quantified on digital back-scattered electron images (BSEI) of ash layer and background sediment samples. During burial, the abundant glass shards of shallow ash layers are initially altered, presumably to smectite. Subsequent dissolution of the glass leaves open, shard-shaped pores, resulting in increased porosities. With greater burial, these pores are filled with clinoptilolite. Although the presence of ash and its alteration products clearly influences sediment physical properties, there is no apparent correlation of the abundance of ash or its alteration products with the formation of thrust faults or other structures within the Nankai Trough accretionary prism.

Smectite was reacted at several temperatures between 200°C and 500°C to produce interstratified illite/smectite (I/S) with different proportions of expandable layers. Dispersed and sedimented products were examined using a transmission electron microscope. Particle size and aspect ratio showed no systematic change as a function of reaction extent during R0 illitization. However, particles exhibited rounded edges during the early stages of the reaction, suggesting some dissolution of primary smectite. Additionally, increasing particle contrast in the electron beam suggests thickening of particles with increasing reaction extent. The thickening of particles is thought to be produced by the nucleation and precipitation of secondary illite layers on primary smectite layers. In the most extensively reacted I/S, particles have become aggregated into clumps or quasicrystals by lateral growth of illite layers. Internal uniformity of crystallographic alignment of individual growing crystals within each aggregate was reflected in the increasing frequency of 60° and 120° interfacial angles within each aggregate. In highly illitic I/S, these aggregates took on an overall euhedral form and became crystallographically contiguous, producing single crystal electron diffraction patterns.

The effects of reaction time (2 to 72 h) and NH4+/A13+ molar ratio (1.6, 2.4 and 3.2) on the hydrothermal synthesis of ammonium-saponites are investigated. The gels are obtained by mixing powders, resulting in a stoichiometric composition, Mg3Si34Al0.6O10(OH)2, with aqueous ammonium solutions, with and without F, to result in initial NH4+/Al3+ molar ratios of 1.6, 2.4 and 3.2. The solid bulk products are characterized by X-raydiffraction (XRD), X-ray fluorescence (XRF) and scanning electron microscopy (SEM) combined with energy-dispersive X-ray (EDX) analysis. The cation exchange capacity (CEC) is determined with an ammonia selective electrode and the pH of the water from the first washing is measured. Ammonium-saponite is formed rapidly within 16 h. A higher NH4+/A13+ molar ratio and the presence of F facilitate the crystallization of saponite. Small metastable amounts of bayerite, Al(OH)3, are present at low NH4+/A13+ molar ratios; after short reaction times, they disappear. During the first 4 h, the pH decreases rapidly, then drops slowly to a constant level of approximately 4.6 after 60 h. With increasing reaction time, saponite crystallites grow in the ab directions of the individual sheets with almost no stacking to thicker flakes. The NH4+ CEC of the solid products increases strongly within the first 24 h. A maximum of 53.3 meq/100 g is observed. The saponite yield increases from approximately 25% after 2 h to almost 100% after 72 h.

A large and representative collection of clay-size dioctahedral mica minerals differing in their chemical compositions has been studied by infrared (IR) spectroscopy in the OH stretching vibration region. Decomposition of the IR spectra in the individual OH bands has provided unambiguous identification of the band positions for each defined pair of octahedral cations bonded to OH groups. The presence of pyrophyllite-like local structural environments in samples having a deficiency of K in interlayers has been established. A set of the relationships between the OH frequencies corresponding to pairs of cations having different valency and mass has been found.

Cores of pelitic sediments (Eocene-Miocene) of the drillings Puchkirchen 1 and Geretsberg 1 (Molasse Basin, Upper Austria) have been studied to determine the mineralogical and chemical changes taking place during burial diagenesis. Mineralogical and chemical investigations of the bulk samples show that the deepest samples of the profiles are derived from a different source area. In particular, there is an increase in kaolinite and chlorite with depth and a decrease in quartz related to the initial sedimentology and provenance.

Investigations of the <2 µm and <0.2 µm fractions of the profiles Puchkirchen 1 and Geretsberg 1 reveal the diagenetic overprint of the mineral constituents: The gradual illitization of mixed-layer illite-smectite, also reflected in an increase of K2O and Al2O3, is displayed most prominently in the <0.2 µm fraction. The source for the Al and K is the dissolution of K-feldspar (<2 µm fraction), as indicated in many previous studies.

The I-S mixed-layer phases are randomly interlayered to a depth of 1600 m; from there on a regular interstratified I-S phase appears in coexistence with the randomly interlayered I-S mixed layer. The randomly oriented phase is still present in major amounts to depths of 2500 m, presumably as a result of the low geothermal gradient (2.9 °C/100 m) in the Molasse Basin.

The calculation of the structural formula of the end members illite and smectite from this series of I-S mixed-layer phases gave the following results: Smectite: $${K_{0.14}}{X^ + }_{0.44}\left( {A{l_{1.10}}M{g_{0.46}}F{e_{0.36}}T{i_{0.01}}} \right)S{i_{4.03}}{O_{10}}{\left( {OH} \right)_2}$$

Illite: $${K_{0.44}}{X^ + }_{0.19}\left( {A{l_{1.26}}M{g_{0.42}}F{e_{0.38}}T{i_{0.01}}} \right)\left( {S{i_{3.52}}A{l_{0.48}}} \right){O_{10}}{\left( {OH} \right)_2}$$

The end-member interlayer charge for the smectite component (+0.58) is higher than reported for typical smectites (+0.32 to +0.47). It is suggested that the I-S phases of the Molasse Basin are probably intergrowths of 3 layer-silicate members: illite, low-charged smectite and high-charged smectite. The determined smectite end-member composition represents, therefore, an average for a variable 2-component smectite system. The charge-differences of the 2 smectites would likely reflect the differences in source material, which in turn would have led to the formation of different early, highly smectitic I-S phases in the sedimentary basin.

Our methods of research, duly elaborated hereafter, would benefit from being applied to the realm of the East. For that matter, the examination of Syriac, Armenian, Coptic or Arabic manuscripts does not differ in the least from that of a Greek or Latin manuscript. The rules developed by classical philologists are just as valid for the study of the Maxims of Phtahhotep and the Precepts of Kagemeni…

Alphonse Dain (1975), Les Manuscrits (Paris, Les Belles Lettres)

One of the objects of a comparative history of the scholarly practices in the West, the Far East, the Arab world and classical antiquity is the role of libraries in the constitution, transmission and transformations of the great textual corpora. To the institutional and social aspects of the politics of social memory should be added the range of intellectual and technical practices which have as their aim the conservation of this inheritance: material conservation and transmission - copying texts, restoring them, transferring them from one medium, one script and one language to another - but also work on the literal level and the meaning, the content and the form.

Although, in one respect, the role of popular movements in the collapse of the Soviet system was clear and fundamental, nevertheless that played by the former Communist elites was equally important.

Montmorillonites saturated with Li+, Na+, K+, NH4+, Mg2+, Ca2+, Ba2+, or Ni2+ ions can form complexes with propylene carbonate (PC) by intercalation; the d(001) of montmorillonite expands to 19 Å. In the infrared absorption spectra of these complexes, the C=0 stretching band of the intercalated PC molecules shifts to lower frequencies, and the amount of the shift increased with the increase of the polarizing power of the interlayer cations. Water molecules were strongly bound to the cations. The PC molecules interacted with the cations by way of H2O molecules. With the removal of H2O, the PC molecules directly coordinate to the cations and the PC molecules show a much larger red-shift in the C=O frequency. The PC-montmorillonite complexes exhibited osmotic swelling, even in aqueous electrolyte solutions. This finding is interpreted in terms of the formation of thick electric double-layers consisting of PC and H2O between the 2:1 layers.

High-resolution transmission electron microscopy has revealed spherical and hemispherical structures on the surface of partly hydrated volcanic and synthetic glasses. These structures contrast with the bulk of the glass in showing lattice-fringe images indicative of the early stages of crystallization. Heavy-ion Rutherford scattering analysis of the noncrystalline volcanic glass indicates a structural water with hydrogen and deuterium. Depth profiles show that the glass grains contain structural water without adsorbed water on the surface. The presence of structural water in volcanic glass must be of interest to the formation of primitive clays. The spherical and hemispherical structures favor production of clay precursors in the presence of water.

A hydrothermally altered rhyolitic hyaloclastite from Ponza island, Italy, has four alteration zones with unique clay assemblages: (1) a non-pervasive argillic zone characterized by smectite; (2) a propylitic zone with interstratified illite-smectite (I-S) containing 10–85% illite (I); (3) a silicic zone composed of I-S with ≥90% I and pure illite; and (4) a sericitic zone with I-S ranging from 66% I to pure illite. Atomic force microscopy reveals abrupt changes in particle morphology with illitization, including initial changes from anhedral plates to laths and then to euhedral plates and hexagonal plates. I-S particles progressively thicken with illitization and mean particle area (basal plane) remains constant from pure smectite to I-S with 80% I. However, particle area increases from 90 to 100% illite. Computer modeling of I-S structural forms indicates octahedral cation ordering progressively changes from cis- vacant smectite to interstratified cis- and tnuis-vacant I-S, and then to trans-vacant illite. In addition, polytypes progressively change from 1 Md to 1M, and then to 2M, illite. Electron-microprobe and X-ray fluoresence analyses show that I-S chemistry progressively changes during illitization, evolving toward a phengitic composition with ∼0.89 fixed interlayer K+ per O10(OH)2. Octahedral Mg2+ shows little change with illitization, varying from 0.3 to 0.5 cations per O,10(OH)2. The layer charge of smectite is ~0.38 equivalents per O10(OH)2.

On the basis of abrupt changes in morphology and progressive changes in polytype and chemistry, smectite illitization on Ponza involved a dissolution and recrystallization mechanism with multiple stages of nucléation and crystal growth. In this multi-step model, temperature of alteration provided the major control for the layer composition, polytype, and morphology of I-S crystallites. Other factors that may play a secondary role include: K+ availability, water-rock ratio, and permeability. Alternatively, the mechanism of I-S and illite formation at Ponza and other hydrothermal environments may occur by direct precipitation of I-S crystallites from rhyolite glass and may not involve progressive reactions of smectite precursors.

2-Phenethylamine 13C-enriched in the beta position was adsorbed on four different aluminum-exchanged clays: hectorite, Barasym, Laponite RD, and lithium taeniolite. The sites for adsorption were characterized by 13C high-resolution cross-polarization magic angle spinning nuclear magnetic resonance (CPMAS-NMR) spectroscopy. Using differences in chemical shift values and linewidths, three different types of bound ammonium compounds and a motionally restricted bound compound were identified. Correlation with charge effects indicated that one of the clay sites was extremely acidic.

The important catalytic sites for the different clays, the edge or platelet face, interlamellar and some combination of both, were probed by using the trimethylsilyl group as a clay-blocking agent. Silylation of aluminum-exchanged Laponite RD and Li taeniolite had little effect on amine adsorption. This indicates that, for these clays, amine adsorption occurred mainly at interlamellar sites. For hectorite, amine adsorption occurred at both surface and interlamellar sites, and silylation had the effect of reducing surface adsorption. Silylation of Barasym resulted in a very interesting shift of adsorption from one kind of surface site to a more acidic surface site.

Smectite and zeolites were formed from a volcanic glass as the products of reaction with NaOH solution at 90°C and 100°C under atmospheric pressure. Formation conditions of smectite and various zeolites were determined by the ratio of the amounts of volcanic glass (g) to NaOH (g) in the solution. Smectite was formed under the condition that the values of weight of volcanic glass (g)/(NaOH(g)/40) are between 0.5 and 6. Fe was an important constituent of the octahedral layer of smectite.

Since the theme of this issue is ‘back to the future,’ especially to the ways in which information formats before the age of printing anticipate and perhaps even may give some guidance to principles of organization and cognitive layouts for the ‘new’ science of information design, I am going to focus in my presentation on the design of memory storage, as it was taught and practiced in the Middle Ages. It is important to recognize that ‘memory-art’ accompanied every aspect of education in the ancient trivium, though different aspects and capacities of human memory were emphasized as appropriate to its various disciplines. What is commonly now taken to be ‘the art of memory,’ namely the advice to link powerful images of ‘content’ (imagines rerum) together in dramatic scenes conceived within a mental location (locus) (as described most completely in the early first century B.C. Rhetorica ad Herennium) is not a universal technique but specifically a device of Rhetoric, and thus of composition. There is also an ‘art of memory’ associated with Dialectic, and this is the device of the ‘topics’ or ‘seats’ (topoi) of argument, syllogism and enthymeme arranged in an orderly schematic of specific mental ‘places.’ Aristotle expounded this scheme as a variety of mnemonic art in his treatise Peri Topoi, and in turn it was further disseminated to later antiquity and the Middle Ages in works by Cicero and Boethius.

Adsorption-desorption of Cd to Ca montmorillonite (SAz-1) was studied at concentrations ranging from 44.5 to 266.8 μM. An adsorption model was employed in the analysis of the data. The procedure consists of solving the electrostatic Gouy-Chapman equations and calculating adsorbed amounts of the cations as the sum of the cations residing in the double-layer region, and the cations chemically bound to the surface, in a closed system. The model also accounts explicitly for cation complexation in solution. The model yields good predictions for the adsorbed amounts of Cd, Ca and Mg, by employing binding coefficients from previous studies for the divalent cations and for Na, K and CdCl+. The model calculations also yield good predictions for the apparent hysteresis observed in the adsorbed amounts of Cd after each of 3 cycles of desorption. The apparent hysteresis is explained by the reduction in the total concentrations of Ca and Mg in desorption cycles, and the corresponding increase in the magnitude of the surface potential. Our estimates indicate that adsorption of Cd is mostly to planar, rather than edge sites of the clay mineral.