Individuals differ greatly in their ability to learn the sounds of second languages, even when learning starts early in life. Recent research has suggested that the ability to identify the idiosyncratic acoustic variations introduced into the speech stream by the speaker might be relevant for second-language (L2) phoneme learning. However, only a positive correlation between voice recognition and phoneme learning has been shown. In the present study, we investigated whether voice processing ability predicts L2 phoneme learning. We employed a battery of behavioral cognitive ability measures to assess voice processing ability and L2 phoneme learning in 57 early bilingual adults. Confirmatory factor analyses (CFAs) and structural equation modeling (SEM) revealed that voice processing ability predicts L2 phoneme learning. Our findings align with theories of speech perception that attribute a fundamental role to the analysis of voice cues and suggest that the accurate identification of speaker-specific variation is also relevant for phoneme learning.

A penalized likelihood (PL) method for structural equation modeling (SEM) was proposed as a methodology for exploring the underlying relations among both observed and latent variables. Compared to the usual likelihood method, PL includes a penalty term to control the complexity of the hypothesized model. When the penalty level is appropriately chosen, the PL can yield an SEM model that balances the model goodness-of-fit and model complexity. In addition, the PL results in a sparse estimate that enhances the interpretability of the final model. The proposed method is especially useful when limited substantive knowledge is available for model specifications. The PL method can be also understood as a methodology that links the traditional SEM to the exploratory SEM (Asparouhov & Muthén in Struct Equ Model Multidiscipl J 16:397–438, 2009). An expectation-conditional maximization algorithm was developed to maximize the PL criterion. The asymptotic properties of the proposed PL were also derived. The performance of PL was evaluated through a numerical experiment, and two real data illustrations were presented to demonstrate its utility in psychological research.

A maximum likelihood estimation routine is presented for a generalized structural equation model that permits a combination of response variables from various distributions (e.g., normal, Poisson, binomial, etc.). The likelihood function does not have a closed-form solution and so must be numerically approximated, which can be computationally demanding for models with several latent variables. However, the dimension of numerical integration can be reduced if one or more of the latent variables do not directly affect any nonnormal endogenous variables. The method is demonstrated using an empirical example, and the full estimation details, including first-order derivatives of the likelihood function, are provided.

Mediation analysis plays an important role in understanding causal processes in social and behavioral sciences. While path analysis with composite scores was criticized to yield biased parameter estimates when variables contain measurement errors, recent literature has pointed out that the population values of parameters of latent-variable models are determined by the subjectively assigned scales of the latent variables. Thus, conclusions in existing studies comparing structural equation modeling (SEM) and path analysis with weighted composites (PAWC) on the accuracy and precision of the estimates of the indirect effect in mediation analysis have little validity. Instead of comparing the size on estimates of the indirect effect between SEM and PAWC, this article compares parameter estimates by signal-to-noise ratio (SNR), which does not depend on the metrics of the latent variables once the anchors of the latent variables are determined. Results show that PAWC yields greater SNR than SEM in estimating and testing the indirect effect even when measurement errors exist. In particular, path analysis via factor scores almost always yields greater SNRs than SEM. Mediation analysis with equally weighted composites (EWCs) also more likely yields greater SNRs than SEM. Consequently, PAWC is statistically more efficient and more powerful than SEM in conducting mediation analysis in empirical research. The article also further studies conditions that cause SEM to have smaller SNRs, and results indicate that the advantage of PAWC becomes more obvious when there is a strong relationship between the predictor and the mediator, whereas the size of the prediction error in the mediator adversely affects the performance of the PAWC methodology. Results of a real-data example also support the conclusions.

The new software package OpenMx 2.0 for structural equation and other statistical modeling is introduced and its features are described. OpenMx is evolving in a modular direction and now allows a mix-and-match computational approach that separates model expectations from fit functions and optimizers. Major backend architectural improvements include a move to swappable open-source optimizers such as the newly written CSOLNP. Entire new methodologies such as item factor analysis and state space modeling have been implemented. New model expectation functions including support for the expression of models in LISREL syntax and a simplified multigroup expectation function are available. Ease-of-use improvements include helper functions to standardize model parameters and compute their Jacobian-based standard errors, access to model components through standard R $ mechanisms, and improved tab completion from within the R Graphical User Interface.

Methodological development of the model-implied instrumental variable (MIIV) estimation framework has proved fruitful over the last three decades. Major milestones include Bollen’s (Psychometrika 61(1):109–121, 1996) original development of the MIIV estimator and its robustness properties for continuous endogenous variable SEMs, the extension of the MIIV estimator to ordered categorical endogenous variables (Bollen and Maydeu-Olivares in Psychometrika 72(3):309, 2007), and the introduction of a generalized method of moments estimator (Bollen et al., in Psychometrika 79(1):20–50, 2014). This paper furthers these developments by making several unique contributions not present in the prior literature: (1) we use matrix calculus to derive the analytic derivatives of the PIV estimator, (2) we extend the PIV estimator to apply to any mixture of binary, ordinal, and continuous variables, (3) we generalize the PIV model to include intercepts and means, (4) we devise a method to input known threshold values for ordinal observed variables, and (5) we enable a general parameterization that permits the estimation of means, variances, and covariances of the underlying variables to use as input into a SEM analysis with PIV. An empirical example illustrates a mixture of continuous variables and ordinal variables with fixed thresholds. We also include a simulation study to compare the performance of this novel estimator to WLSMV.

While effect size estimates, post hoc power estimates, and a priori sample size determination are becoming a routine part of univariate analyses involving measured variables (e.g., ANOVA), such measures and methods have not been articulated for analyses involving latent means. The current article presents standardized effect size measures for latent mean differences inferred from both structured means modeling and MIMIC approaches to hypothesis testing about differences among means on a single latent construct. These measures are then related to post hoc power analysis, a priori sample size determination, and a relevant measure of construct reliability.

A method is presented for estimating reliability using structural equation modeling (SEM) that allows for nonlinearity between factors and item scores. Assuming the focus is on consistency of summed item scores, this method for estimating reliability is preferred to those based on linear SEM models and to the most commonly reported estimate of reliability, coefficient alpha.

The infinitesimal jackknife provides a simple general method for estimating standard errors in covariance structure analysis. Beyond its simplicity and generality what makes the infinitesimal jackknife method attractive is that essentially no assumptions are required to produce consistent standard error estimates, not even the requirement that the population sampled has the covariance structure assumed. Commonly used covariance structure analysis software uses parametric methods for estimating parameters and standard errors. When the population sampled has the covariance structure assumed, but fails to have the distributional form assumed, the parameter estimates usually remain consistent, but the standard error estimates do not. This has motivated the introduction of a variety of nonparametric standard error estimates that are consistent when the population sampled fails to have the distributional form assumed. The only distributional assumption these require is that the covariance structure be correctly specified. As noted, even this assumption is not required for the infinitesimal jackknife. The relation between the infinitesimal jackknife and other nonparametric standard error estimators is discussed. An advantage of the infinitesimal jackknife over the jackknife and the bootstrap is that it requires only one analysis to produce standard error estimates rather than one for every jackknife or bootstrap sample.

We propose a new and flexible simulation method for non-normal data with user-specified marginal distributions, covariance matrix and certain bivariate dependencies. The VITA (VIne To Anything) method is based on regular vines and generalizes the NORTA (NORmal To Anything) method. Fundamental theoretical properties of the VITA method are deduced. Two illustrations demonstrate the flexibility and usefulness of VITA in the context of structural equation models. R code for the implementation is provided.

In the behavioral and social sciences, quasi-experimental and observational studies are used due to the difficulty achieving a random assignment. However, the estimation of differences between groups in observational studies frequently suffers from bias due to differences in the distributions of covariates. To estimate average treatment effects when the treatment variable is binary, Rosenbaum and Rubin (1983a) proposed adjustment methods for pretreatment variables using the propensity score.

However, these studies were interested only in estimating the average causal effect and/or marginal means. In the behavioral and social sciences, a general estimation method is required to estimate parameters in multiple group structural equation modeling where the differences of covariates are adjusted.

We show that a Horvitz-Thompson-type estimator, propensity score weighted M estimator (PWME) is consistent, even when we use estimated propensity scores, and the asymptotic variance of the PWME is shown to be less than that with true propensity scores.

Furthermore, we show that the asymptotic distribution of the propensity score weighted statistic under a null hypothesis is a weighted sum of independent χ12 variables.

We show the method can compare latent variable means with covariates adjusted using propensity scores, which was not feasible by previous methods. We also apply the proposed method for correlated longitudinal binary responses with informative dropout using data from the Longitudinal Study of Aging (LSOA). The results of a simulation study indicate that the proposed estimation method is more robust than the maximum likelihood (ML) estimation method, in that PWME does not require the knowledge of the relationships among dependent variables and covariates.

An approach to generate non-normality in multivariate data based on a structural model with normally distributed latent variables is presented. The key idea is to create non-normality in the manifest variables by applying non-linear linking functions to the latent part, the error part, or both. The algorithm corrects the covariance matrix for the applied function by approximating the deviance using an approximated normal variable. We show that the root mean square error (RMSE) for the covariance matrix converges to zero as sample size increases and closely approximates the RMSE as obtained when generating normally distributed variables. Our algorithm creates non-normality affecting every moment, is computationally undemanding, easy to apply, and particularly useful for simulation studies in structural equation modeling.

Higher-order approximations to the distributions of fit indexes for structural equation models under fixed alternative hypotheses are obtained in nonnormal samples as well as normal ones. The fit indexes include the normal-theory likelihood ratio chi-square statistic for a posited model, the corresponding statistic for the baseline model of uncorrelated observed variables, and various fit indexes as functions of these two statistics. The approximations are given by the Edgeworth expansions for the distributions of the fit indexes under arbitrary distributions. Numerical examples in normal and nonnormal samples with the asymptotic and simulated distributions of the fit indexes show the relative inappropriateness of the normal-theory approximation using noncentral chi-square distributions. A simulation for the confidence intervals of the fit indexes based on the normal-theory Studentized estimators under normality with a small sample size indicates an advantage for the approximation by the Cornish–Fisher expansion over those by the noncentral chi-square distribution and the asymptotic normality.

Formulas for the asymptotic biases of the parameter estimates in structural equation models are provided in the case of the Wishart maximum likelihood estimation for normally and nonnormally distributed variables. When multivariate normality is satisfied, considerable simplification is obtained for the models of unstandardized variables. Formulas for the models of standardized variables are also provided. Numerical examples with Monte Carlo simulations in factor analysis show the accuracy of the formulas and suggest the asymptotic robustness of the asymptotic biases with normality assumption against nonnormal data. Some relationships between the asymptotic biases and other asymptotic values are discussed.

This paper develops a theorem that facilitates computing the degrees of freedom of Wald-type chi-square tests for moment restrictions when there is rank deficiency of key matrices involved in the definition of the test. An if and only if (iff) condition is developed for a simple rule of difference of ranks to be used when computing the desired degrees of freedom of the test. The theorem is developed exploiting basics tools of matrix algebra. The theorem is shown to play a key role in proving the asymptotic chi-squaredness of a goodness of fit test in moment structure analysis, and in finding the degrees of freedom of this chi-square statistic.

Starting with Kenny and Judd (Psychol. Bull. 96:201–210, 1984) several methods have been introduced for analyzing models with interaction terms. In all these methods more information from the data than just means and covariances is required. In this paper we also use more than just first- and second-order moments; however, we are aiming to adding just a selection of the third-order moments. The key issue in this paper is to develop theoretical results that will allow practitioners to evaluate the strength of different third-order moments in assessing interaction terms of the model. To select the third-order moments, we propose to be guided by the power of the goodness-of-fit test of a model with no interactions, which varies with each selection of third-order moments. A theorem is presented that relates the power of the usual goodness-of-fit test of the model with the power of a moment test for the significance of third-order moments; the latter has the advantage that it can be computed without fitting a model. The main conclusion is that the selection of third-order moments can be based on the power of a moment test, thus assessing the relevance in the analysis of different sets of third-order moments can be computationally simple. The paper gives an illustration of the method and argues for the need of refraining from adding into the analysis an excess of higher-order moments.

The general use of coefficient alpha to assess reliability should be discouraged on a number of grounds. The assumptions underlying coefficient alpha are unlikely to hold in practice, and violation of these assumptions can result in nontrivial negative or positive bias. Structural equation modeling was discussed as an informative process both to assess the assumptions underlying coefficient alpha and to estimate reliability

A Metropolis–Hastings Robbins–Monro (MH-RM) algorithm for high-dimensional maximum marginal likelihood exploratory item factor analysis is proposed. The sequence of estimates from the MH-RM algorithm converges with probability one to the maximum likelihood solution. Details on the computer implementation of this algorithm are provided. The accuracy of the proposed algorithm is demonstrated with simulations. As an illustration, the proposed algorithm is applied to explore the factor structure underlying a new quality of life scale for children. It is shown that when the dimensionality is high, MH-RM has advantages over existing methods such as numerical quadrature based EM algorithm. Extensions of the algorithm to other modeling frameworks are discussed.

Researchers in the field of network psychometrics often focus on the estimation of Gaussian graphical models (GGMs)—an undirected network model of partial correlations—between observed variables of cross-sectional data or single-subject time-series data. This assumes that all variables are measured without measurement error, which may be implausible. In addition, cross-sectional data cannot distinguish between within-subject and between-subject effects. This paper provides a general framework that extends GGM modeling with latent variables, including relationships over time. These relationships can be estimated from time-series data or panel data featuring at least three waves of measurement. The model takes the form of a graphical vector-autoregression model between latent variables and is termed the ts-lvgvar when estimated from time-series data and the panel-lvgvar when estimated from panel data. These methods have been implemented in the software package psychonetrics, which is exemplified in two empirical examples, one using time-series data and one using panel data, and evaluated in two large-scale simulation studies. The paper concludes with a discussion on ergodicity and generalizability. Although within-subject effects may in principle be separated from between-subject effects, the interpretation of these results rests on the intensity and the time interval of measurement and on the plausibility of the assumption of stationarity.

In this paper, we show that for some structural equation models (SEM), the classical chi-square goodness-of-fit test is unable to detect the presence of nonlinear terms in the model. As an example, we consider a regression model with latent variables and interactions terms. Not only the model test has zero power against that type of misspecifications, but even the theoretical (chi-square) distribution of the test is not distorted when severe interaction term misspecification is present in the postulated model. We explain this phenomenon by exploiting results on asymptotic robustness in structural equation models. The importance of this paper is to warn against the conclusion that if a proposed linear model fits the data well according to the chi-quare goodness-of-fit test, then the underlying model is linear indeed; it will be shown that the underlying model may, in fact, be severely nonlinear. In addition, the present paper shows that such insensitivity to nonlinear terms is only a particular instance of a more general problem, namely, the incapacity of the classical chi-square goodness-of-fit test to detect deviations from zero correlation among exogenous regressors (either being them observable, or latent) when the structural part of the model is just saturated.