Common ragweed is a troublesome weed in many crops. Farmers and crop advisors in the coastal Mid-Atlantic region have reported inadequate control of common ragweed in soybean fields with glyphosate and other herbicide modes of action. To determine whether herbicide resistance was one of the causes of poor herbicide performance, 29 accessions from four states (Delaware, Maryland, New Jersey, and Virginia) where common ragweed plants survived herbicide applications and produced viable seeds were used for greenhouse screening. Common ragweed seedlings from those accessions were treated with multiple rates of cloransulam, fomesafen, or glyphosate, applied individually postemergence (POST). All accessions except one demonstrated resistance to at least one of the herbicides applied at twice the effective rate (2×), 17 accessions were two-way resistant (to glyphosate and cloransulam, or to glyphosate and fomesafen), and three-way resistance was present in eight accessions collected from three different states. Based on the POST study, five accessions were treated preemergence (PRE) with herbicides that inhibit acetolactate synthase (ALS), and two accessions were treated with herbicides that inhibit protoporphyrinogen oxidase (PPO). All accessions treated PRE with the ALS inhibitors chlorimuron or cloransulam demonstrated resistance at the 2× rates. Both accessions treated PRE with the PPO inhibitor sulfentrazone had survivors at the 2× rate. When the same accessions were treated PRE with fomesafen, one had survivors at the 2× rate, and one had survivors at the 1× rate. Results from these tests confirmed common ragweed with three-way resistance to POST herbicides is widespread in the region. In addition, this is the first confirmation that common ragweed accessions in the region are also resistant to ALS- or PPO-inhibiting herbicides when applied PRE.

Herbicide resistance in weeds significantly threatens crop production in the United States. The introduction of dicamba-resistant soybean and cotton stacked with other herbicide tolerance traits has provided farmers with the flexibility of having multiple herbicide options to diversify their weed management practices and delay resistance evolution. XtendiMax® herbicide with VaporGrip® Technology is a dicamba formulation registered for use on dicamba-resistant soybean and cotton crops by the U.S. Environmental Protection Agency (EPA). One of the terms of its registration includes an evaluation of inquiries on reduced weed control efficacy by growers or users of XtendiMax for suspected weed resistance. A total of 3,555 product performance inquiries (PPIs) were received from 2018 to 2021 regarding reduced weed control efficacy by dicamba. Following the criteria recommended by EPA for screening of suspected resistance in the field, a total of 103 weed accessions from 63 counties in 13 states were collected for greenhouse testing over those 4 yr. Weed accessions for greenhouse testing were collected only in states where resistance to dicamba was not yet confirmed in the weed species under investigation. The accessions, which consisted primarily of waterhemp and Palmer amaranth, were treated with dicamba at rates of 560 g ae ha−1 and 1,120 g ae ha−1. All weed accessions, except for one accession each of Palmer amaranth and waterhemp, were controlled by ≥90% with dicamba at 21 d after treatment in the greenhouse.

Rapeseed is a popular cover crop choice due to its deep-growing taproot, which creates soil macropores and increases water infiltration. Brassicaceae spp. that are mature or at later growth stages can be troublesome to control. Experiments were conducted in Delaware and Virginia to evaluate herbicides for terminating rapeseed cover crops. Two separate experiments, adjacent to each other, were established to evaluate rapeseed termination by 14 herbicide treatments at two timings. Termination timings included an early and late termination to simulate rapeseed termination prior to planting corn and soybean, respectively, for the region. At three locations where rapeseed height averaged 12 cm at early termination and 52 cm at late termination, glyphosate + 2,4-D was most effective, controlling rapeseed 96% 28 d after early termination (DAET). Paraquat + atrazine + mesotrione (92%), glyphosate + saflufenacil (91%), glyphosate + dicamba (91%), and glyphosate (86%) all provided at least 80% control 28 DAET. Rapeseed biomass followed a similar trend. Paraquat + 2,4-D (85%), glyphosate + 2,4-D (82%), and paraquat + atrazine + mesotrione (81%) were the only treatments that provided at least 80% control 28 d after late termination (DALT). Herbicide efficacy was less at Painter in 2017, where rapeseed height was 41 cm at early termination, and 107 cm at late termination. No herbicide treatments controlled rapeseed >80% 28 DAET or 28 DALT at this location. Herbicide termination of rapeseed is best when the plant is small; termination of large rapeseed plants may require mechanical of other methods beyond herbicides.

Horseweed is a problematic weed to control, especially in no-tillage production. Increasing cases of herbicide resistance have exacerbated the problem, necessitating alternative control options and an integrated weed management approach. Field experiments were conducted to evaluate horseweed suppression from fall-planted cover crop monocultures and mixtures as well as two fall-applied residual herbicide treatments. Prior to cover crop termination, horseweed density was reduced by 88% to 96% from cover crops. At cover crop termination in late spring, cereal rye biomass was 7,671 kg ha–1, which was similar to cereal rye–containing mixtures (7,720 kg ha–1) but greater than legumes in monoculture (3,335 kg ha–1). After cover crops were terminated in late spring using a roller crimper, corn and soybeans were planted and horseweed was evaluated using density counts, visible ratings, and biomass collection until harvest. Forage radish winterkilled, offering no competition in late winter or biomass to contribute to horseweed suppression after termination. Excluding forage radish in monoculture, no difference in horseweed suppression was detected between cereal rye–containing cover crops and legumes (crimson clover and hairy vetch) in monoculture. Likewise, horseweed suppression was similar between monocultures and mixtures, with the exception of one site-year in which mixtures provided better suppression. In this experiment, the cover crop treatments performed as well as or better than the fall-applied residual herbicides, flumioxazin+paraquat and metribuzin+chlorimuron-ethyl. These results indicate that fall-planted cover crops are a viable option to suppress horseweed and can be an effective part of an integrated weed management program. Furthermore, cover crop mixtures can be used to gain the benefits of legume or brassica cover crop species without sacrificing horseweed suppression.

A field study was conducted for the 2014 and 2015 growing season in Arkansas, Indiana, Illinois, Missouri, Ohio, and Tennessee to determine the effect of cereal rye and either oats, radish, or annual ryegrass on the control of Amaranthus spp. when integrated with comprehensive herbicide programs in glyphosate-resistant and glufosinate-resistant soybean. Amaranthus species included redroot pigweed, waterhemp, and Palmer amaranth. The two herbicide programs included were: a PRE residual herbicide followed by POST application of foliar and residual herbicide (PRE/POST); or PRE residual herbicide followed by POST application of foliar and residual herbicide, followed by another POST application of residual herbicide (PRE/POST/POST). Control was not affected by type of soybean resistance trait. At the end of the season, herbicides controlled 100 and 96% of the redroot pigweed and Palmer amaranth, respectively, versus 49 and 29% in the absence of herbicides, averaged over sites and other factors. The PRE/POST and PRE/POST/POST herbicide treatments controlled 83 and 90% of waterhemp at the end of the season, respectively, versus 14% without herbicide. Cover crop treatments affected control of waterhemp and Palmer amaranth and soybean yield, only in the absence of herbicides. The rye cover crop consistently reduced Amaranthus spp. density in the absence of herbicides compared to no cover treatment.

Emergence patterns of foxtail in spring wheat following soybean were evaluated for three seeding dates and three tillage regimes. Cumulative foxtail emergence, as a percentage of total plants emerged in the growing season, was generally not influenced by tillage regime throughout most of the emergence period, but when differences occurred, emergence was lower with no-till than with moldboard plow. Foxtail seedling densities were greater in no-till and chisel plow than in moldboard plow. Weed biomass and wheat yields were not affected by tillage regime. Delaying wheat seeding reduced foxtail percent emergence and emerged seedling density. Differences in emergence patterns of foxtail were attributable to thermal accumulation after seeding. Wheat yield was not influenced by seeding date in 2 of 3 yr.

Intensive field surveys were conducted in eastern Nebraska to determine the frequency distribution model and associated parameters of broadleaf and grass weed seedling populations. The negative binomial distribution consistently fit the data over time (1992 to 1993) and space (fields) for both the inter and intrarow broadleaf and grass weed seedling populations. The other distributions tested (Poisson with zeros, Neyman type A, logarithmic with zeros, and Poisson-binomial) did not fit the data as consistently as the negative binomial distribution. Associated with the negative binomial distribution is a k parameter. k is a nonspatial aggregation parameter related to the variance at a given mean value. The k parameter of the negative binomial distribution was consistent across weed density for individual weed species in a given field except for foxtail spp. populations. Stability of the k parameter across field sites was assessed using the likelihood ratio test There was no stable or common k value across field sites and years for all weed species populations. The lack of stability in k across field sites is of concern, because this parameter is used extensively in the development of parametric sequential sampling procedures. Because k is not stable across field sites, k must be estimated at the time of sampling. Understanding the variability in it is critical to the development of parametric sequential sampling strategies and understanding the dynamics of weed species in the field.

The impact of POST applications of fluazifop-P on sugarcane grown in Louisiana was determined for 3, 6,11, 22, and 44% of the lowest rate recommended for the control of johnsongrass in soybean (100 g ai ha−1). In field studies, sugarcane injury 4 WAT increased as the rate of fluazifop-P increased. Injury in excess of 80% was observed when fluazifop-P at 44 g ha−1 was applied in May and June and 54% when applied in August Sugarcane stalks treated with fluazifop-P were fewer in number, shorter and lighter, and immature at harvest This resulted in lower Brix and sucrose levels, higher fiber content, and ultimately lower sugar yields. Reductions in sugar yields associated with an application of fluazifop-P closely paralleled visual injury 4 WAT. Injury from application of fluazifop-P was also evident in the subsequent ratoon crop where reductions in spring shoot counts of 14 to 25% were obtained even when fluazifop-P had been applied at 6 g ha−1 the previous year. Greenhouse studies indicated that the response observed in the field with CP 70-321 sugarcane was indicative of the major cultivars grown, with the possible exception of CP 74-383.

Eight field studies were conducted in soybeans at seven locations in Kansas over a 3-yr period to examine the efficacy of using reduced rates of the herbicides acifluorfen, bentazon, chlorimuron, and tank mixes of acifluorfen and bentazon. POST applications of these herbicides at 1/2X rates at 2 wk after planting (WAP) resulted in broadleaf weed control similar to that obtained from standard treatments of 1X rates applied at 4 WAP at six of seven studies with acifluorfen, bentazon, and acifluorfen plus bentazon and at five of seven studies with chlorimuron. One-quarter rates applied 2 WAP were equivalent to standard treatments for broadleaf weed control in four of seven studies with acifluorfen and chlorimuron, five of seven studies with bentazon, and six of seven studies with acifluorfen plus bentazon. One cultivation at 4 WAP, increased the broadleaf weed control with all herbicide treatments.

Due to the limited availability of selective herbicides to control Sumatran fleabane after soybean emergence, it is essential to develop new options that provide effective control prior to planting. A new herbicide formulation containing diclosulam+halauxifen-methyl was evaluated for effectiveness at two Sumatran fleabane plant heights (5 to 10 cm, and 10 to 50 cm) and for soybean selectivity when applied at 7 or 3 d before planting. Combined results from the two sites showed that diclosulam+halauxifen, applied either alone or in a tank mixture with glyphosate, and the tank mixture of diclosulam+2,4-D amine+glyphosate are effective at all rates tested to control Sumatran fleabane in preplant applications. Crop response was observed with applications 7 days before planting at only one of the sites. A rate-dependent crop response was observed for pre-plant applications performed 3 days before soybean planting. However, crop yield was not significantly affected for either timing across all rates. All rates tested of diclosulam+halauxifen in this study were considered safe to soybean.

Horseweed populations with mixtures of biotypes resistant to glyphosate and acetolactate synthase (ALS)–inhibiting herbicides as well as biotypes with multiple resistance to glyphosate + ALS-inhibiting herbicides have been documented in Indiana and Ohio. These biotypes are particularly problematic because ALS-inhibiting herbicides are commonly tank mixed with glyphosate to improve postemergence horseweed control in soybean. The objective of this research was to characterize the growth and seed production of horseweed populations with resistance to glyphosate or ALS-inhibiting herbicides, and multiple resistance to glyphosate + ALS-inhibiting herbicides. A four-herbicide by four-horseweed population factorial field experiment was conducted in the southeastern region of Indiana in 2007 and repeated in 2008. Four horseweed populations were collected from Indiana or Ohio and confirmed resistant to glyphosate, ALS inhibitors, both, or neither in greenhouse experiments. The four herbicide treatments were untreated, 0.84 kg ae ha−1 glyphosate, 35 g ai ha−1 cloransulam, and 0.84 kg ae ha−1 glyphosate + 35 g ai ha−1 cloransulam. Untreated plants from horseweed populations that were resistant to glyphosate, ALS-inhibiting, or multiple glyphosate + ALS-inhibiting herbicides produced similar amounts of biomass and seed compared to populations that were susceptible to those herbicides or combination of herbicides. Furthermore, aboveground shoot mass and seed production did not differ between treated and untreated plants.