In this letter we make the case that closer integration of sediment core and passive optical remote sensing data would provide new insights into past and contemporary glacio-sedimentary processes. Sediment cores are frequently used to study past glacial processes and environments as they contain a lengthy geochemical and sedimentological record of changing conditions. In contrast, optical remote sensing imagery is used extensively to examine contemporary glacial processes, including meltwater dynamics, glacial retreat, calving, and ice accumulation. While paleoenvironmental data from sediment cores and optical remote sensing imagery are rarely used in tandem, they are complementary. Sediment core records are spatially discrete, providing long-term paleoenvironmental proxy data which require assumptions about environment-sediment linkages. Optical imagery offers precise, spatially extensive data to visualize contemporary processes often limited in their temporal extent. We suggest that methodologies which integrate optical remotely sensing with sediment core data allow direct observation of processes interpolated from sedimentological analysis and achieve a more holistic perspective on glacial processes. This integration addresses the limitations of both data sources and can achieve a stronger understanding of glacier dynamics by expanding the spatiotemporal extent of data, reducing the uncertainty of interpretations, and broadening the local analyses to regional and global scales.

Monte Perdido Glacier, located in the central Pyrenees, is one of the southernmost glaciers in Europe. Due to climate change, this glacier is suffering an accelerated mass loss, especially in the last decades. If the current trends persist, this glacier is expected to disappear in the next 50 years. As part of the efforts of the scientific community to increase the knowledge about this glacier, this research presents the first microstructural characterization of the Monte Perdido Glacier, focused on a high-impurity concentration segment that belongs to an ice core drilled in 2017. The results reveal the ice has a layering defined by air bubbles and non-soluble impurities. The bubble-defined layering exhibits features of both a primary (sedimentary) and a secondary (strain-induced) origin. We found a clear inverse correspondence between the particle concentration and the grains' size and roundness index. A preliminary micro-Raman characterization of the particles shows the occurrence of atacamite, anatase (likely related to ancient mining activities in the vicinity of the glacier) and quartz. The latter could be an indicator of mineral dust, probably suggesting the arrival of dust-laden air masses from the north of the African continent.

We present new data from the debris-rich basal ice layers of the NEEM ice core (NW Greenland). Using mineralogical observations, SEM imagery, geochemical data from silicates (meteoric 10Be, εNd, 87Sr/86Sr) and organic material (C/N, δ13C), we characterize the source material, succession of previous glaciations and deglaciations and the paleoecological conditions during ice-free episodes. Meteoric 10Be data and grain features indicate that the ice sheet interacted with paleosols and eroded fresh bedrock, leading to mixing in these debris-rich ice layers. Our analysis also identifies four successive stages in NW Greenland: (1) initial preglacial conditions, (2) glacial advance 1, (3) glacial retreat and interglacial conditions and (4) glacial advance 2 (current ice-sheet development). C/N and δ13C data suggest that deglacial environments favored the development of tundra and taiga ecosystems. These two successive glacial fluctuations observed at NEEM are consistent with those identified from the Camp Century core basal sediments over the last 3 Ma. Further inland, GRIP and GISP2 summit sites have remained glaciated more continuously than the western margin, with less intense ice-substratum interactions than those observed at NEEM.

The Subglacial Antarctic Lakes Scientific Access (SALSA) Project accessed Mercer Subglacial Lake using environmentally clean hot-water drilling to examine interactions among ice, water, sediment, rock, microbes and carbon reservoirs within the lake water column and underlying sediments. A ~0.4 m diameter borehole was melted through 1087 m of ice and maintained over ~10 days, allowing observation of ice properties and collection of water and sediment with various tools. Over this period, SALSA collected: 60 L of lake water and 10 L of deep borehole water; microbes >0.2 μm in diameter from in situ filtration of ~100 L of lake water; 10 multicores 0.32–0.49 m long; 1.0 and 1.76 m long gravity cores; three conductivity–temperature–depth profiles of borehole and lake water; five discrete depth current meter measurements in the lake and images of ice, the lake water–ice interface and lake sediments. Temperature and conductivity data showed the hydrodynamic character of water mixing between the borehole and lake after entry. Models simulating melting of the ~6 m thick basal accreted ice layer imply that debris fall-out through the ~15 m water column to the lake sediments from borehole melting had little effect on the stratigraphy of surficial sediment cores.

Subglacial sediments have the potential to reveal information about the controls on glacier flow, changes in ice-sheet history and characterise life in those environments. Retrieving sediments from beneath the ice, through hot water drilled access holes at remote field locations, present many challenges. Motivated by the need to minimise weight, corer diameter and simplify assembly and operation, British Antarctic Survey, in collaboration with UWITEC, developed a simple mechanical percussion corer. At depths over 1000 m however, manual operation of the percussion hammer is compromised by the lack of clear operator feedback at the surface. To address this, we present a new auto-release-recovery percussion hammer mechanism that makes coring operations depth independent and improves hammer efficiency. Using a single rope tether for both the corer and hammer operation, this modified percussion corer is relatively simple to operate, easy to maintain, and has successfully operated at a depth of >2130 m.

Glacial erosion produces vast quantities of fine-grained sediment that has a far-reaching impact on Earth surface processes. To gain a better understanding of the production of glacial silt and clay, we use automated mineralogy to quantify the microstructure and mineralogy of rock and sediment samples from 20 basins in the St. Elias Mountains, Yukon, Canada. Sediments were collected from proglacial streams, while rock samples were collected from ice marginal outcrops and fragmented using electrical pulse disaggregation. For both rock fragments and sediments, we observe a log-normal distribution of grain sizes and a sub-micrometer terminal grain size. We find that the abrasion of silt and clay results in both rounding and the exploitation of through-going fractures. The abundance of inter- versus intragranular fractures depends on mineralogy and size. Unlike the relatively larger grains, where crushing and abrasion are thought to exploit and produce discrete populations of grain sizes, the comminution of fines leads to a grain size, composition and rounding that is continuously distributed across size, and highly dependent on source-rock properties.

The geomorphology and stratigraphy of the South Fork Hoh River (SF Hoh), Olympic Mountains, Washington, allow for greater understanding of Marine Oxygen Isotope Stage 2 (MIS 2) ice fluctuations, glacial dynamics, and sedimentation. Age control from optically stimulated luminescence and radiocarbon dating constrains deposited sediments associated with four Late Pleistocene ice-marginal positions that formed under reduced ice volume conditions compared with MIS 3–5 glaciers in the same drainage. The earliest MIS 2 ice margin extended into the main Hoh River valley (pre–SF 1, 28 ka to >23.0 ka). After retreat, the ice occupied three closely spaced ice-marginal positions (SF 1–3) that range in age from 22.0 ka to shortly after 18.7 ka. While the SF 1 and SF 3 positions were previously identified as the Twin Creeks I and II positions, the intermediate SF 2 position had not been recognized. Moraines are composed of poorly sorted, but stratified, sediment and few tills. Diamicton units show evidence of water reworking. This research documents a detailed record of MIS 2 glaciation in a maritime setting in western North America and provides evidence of rapid MIS 2 ice-marginal fluctuations that likely reflect responses to millennial-scale climatic fluctuations and may be relevant to understanding other complex MIS 2 moraine sequences.

In glacial environments particle-size analysis of moraines provides insights into clast origin, transport history, depositional mechanism and processes of reworking. Traditional methods for grain-size classification are labour-intensive, physically intrusive and are limited to patch-scale (1 m2) observation. We develop emerging, high-resolution ground- and unmanned aerial vehicle-based ‘Structure-from-Motion’ (UAV-SfM) photogrammetry to recover grain-size information across a moraine surface in the Heritage Range, Antarctica. SfM data products were benchmarked against equivalent datasets acquired using terrestrial laser scanning, and were found to be accurate to within 1.7 and 50 mm for patch- and site-scale modelling, respectively. Grain-size distributions were obtained through digital grain classification, or ‘photo-sieving’, of patch-scale SfM orthoimagery. Photo-sieved distributions were accurate to <2 mm compared to control distributions derived from dry-sieving. A relationship between patch-scale median grain size and the standard deviation of local surface elevations was applied to a site-scale UAV-SfM model to facilitate upscaling and the production of a spatially continuous map of the median grain size across a 0.3 km2 area of moraine. This highly automated workflow for site-scale sedimentological characterization eliminates much of the subjectivity associated with traditional methods and forms a sound basis for subsequent glaciological process interpretation and analysis.

Isla de los Estados is a mountainous island southeast of Tierra del Fuego, in southernmost South America. Its central and eastern parts have an alpine topography, transected by U-shaped valleys, small, partly over-deepened fjords, and a multitude of abandoned cirques, all associated with extensive former local glaciations. Traces of glacial erosion generally reach 400–450 m a.s.l., and above that trimline a distinct sharp-edged nunatak derived landscape is present. The westernmost part of the island has a lower, more subdued topography, reflecting its "softer" geology but possibly also over-running and erosion by mainland-derived ice streams. The present study concentrated on glacigenic sediment sequences exposed along coastal erosional cliffs. A combination of OSL and 14C datings show that these sediments mostly date from the latest (Wisconsinan/Weichselian) glacial cycle, i.e. from the last ca. 100 ka with the oldest (glaciolacustrine) deposits possibly as old as 90–80 ka. The upper parts of overlying tills, with associated lateral and terminal moraines from glaciers that expanded onto an eustatically exposed dry shelf north of the island, date from the last global glacial maximum (LGM). Radiocarbon ages of peat and lake sediments indicate that deglaciation began 17–16 cal ka BP.

To explore links between glacier dynamics, sediment yields and the accumulation of glacial sediments in a temperate setting, we use extensive glaciological observations for Columbia Glacier, Alaska, and new oceanographic data from the fjord exposed during its retreat. High-resolution seismic data indicate that 3.2 × 108 m3 of sediment has accumulated in Columbia Fjord over the past three decades, which corresponds to ~5 mm a−1 of erosion averaged over the glaciated area. We develop a general model to infer the sediment-flux history from the glacier that is compatible with the observed retreat history, and the thickness and architecture of the fjord sediment deposits. Results reveal a fivefold increase in sediment flux from 1997 to 2000, which is not correlated with concurrent changes in ice flux or retreat rate. We suggest the flux increase resulted from an increase in the sediment transport capacity of the subglacial hydraulic system due to the retreat-related steepening of the glacier surface over a known subglacial deep basin. Because variations in subglacial sediment storage can impact glacial sediment flux, in addition to changes in climate, erosion rate and glacier dynamics, the interpretation of climatic changes based on the sediment record is more complex than generally assumed.

Fláajökull is a non-surging outlet glacier draining the south-eastern part of the Vatnajökull, southeast Iceland. Fláajökull was stationary or advanced slightly between 1966 and 1995 and formed a prominent end moraine. Glacial retreat since then has revealed a cluster of 15 drumlins. This study focuses on the morphology and sedimentology of the drumlins. They are 100–600 m long, 40–130 m wide, and have cores of glaciofluvial sediment or till. The drumlins are draped by ~1 m thick, massive subglacial traction till. The glacier forefield is characterized by a number of arcuate and saw-tooth, terminal and recessional moraine ridges, overridden moraines with fluted surfaces, and glaciofluvial outwash. Some of the drumlins extend towards the 1995 end moraine but terminate abruptly at the moraine and are not observed in front of it. This suggests that they were formed sub-marginally during the 1966–1995 terminal position. The sedimentary structure of the drumlins is best explained by the sticky spot model. Dating and dendrochronological analyses of birch logs found on the surface of one of the drumlins indicate that the valley was forested about 2100 calendar year BP, after which the glacier started to reform, possibly due to an abrupt change in climate.