To uncover the chewing mechanism of Cyrtotrachelus buqueti Guer, a mathematical model was created and a kinematic analysis of its rostrum mouthparts was conducted for, to our knowledge, the first time. To reduce noise and improve the quality of scanning electron micrographs of the weevil's mouthparts, nonlocal means and integral nonlocal means algorithms were proposed. Additionally, based on a comparison and analysis of five classical edge detection algorithms, a multiscale edge detection algorithm based on the B-spline wavelet was used to obtain the boundaries of structural features. The least squares method was used to analyze the data of the mouthparts to fit the mathematical model and fitted curves were obtained using Gaussian equations. The results show that curvature and concave–convex variations of the weevil's mouthparts can highlight fluctuations in friction effects when it chews bamboo shoots, which is helpful in preventing debris from bamboo shoots or other debris from sticking to the mouthpart surfaces. Moreover, this paper highlights the utility of micro-computed tomography (microCT) for three-dimensional (3D) reconstruction and a flowchart is suggested. The reconstructed slices were 9.0 μm thick and an accurate 3D rendered model was obtained from a series of microCT slices. Finally, a real model of the rostrum mouthparts was analyzed using finite-element analysis. The results provide a biological template for the design of a novel bionic drilling mechanism.

Adverse programming of adult non-communicable disease can be induced by poor maternal nutrition during pregnancy and the periconception period has been identified as a vulnerable period. In the current study, we used a mouse maternal low-protein diet fed either for the duration of pregnancy (LPD) or exclusively during the preimplantation period (Emb-LPD) with control nutrition provided thereafter and postnatally to investigate effects on fetal bone development and quality. This model has been shown previously to induce cardiometabolic and neurological disease phenotypes in offspring. Micro 3D computed tomography examination at fetal stages Embryonic day E14.5 and E17.4, reflecting early and late stages of bone formation, demonstrated LPD treatment caused increased bone formation of relative high mineral density quality in males, but not females, at E14.5, disproportionate to fetal growth, with bone quality maintained at E17.5. In contrast, Emb-LPD caused a late increase in male fetal bone growth, proportionate to fetal growth, at E17.5, affecting central and peripheral skeleton and of reduced mineral density quality relative to controls. These altered dynamics in bone growth coincide with increased placental efficiency indicating compensatory responses to dietary treatments. Overall, our data show fetal bone formation and mineral quality is dependent upon maternal nutritional protein content and is sex-specific. In particular, we find the duration and timing of poor maternal diet to be critical in the outcomes with periconceptional protein restriction leading to male offspring with increased bone growth but of poor mineral density, thereby susceptible to later disease risk.

Advancements in computer technology have enabled three-dimensional (3D) reconstruction, data-stitching, and manipulation of 3D data obtained on X-ray imaging systems such as micro-computed tomography (μ-CT). Likewise, intuitive evaluation of these 3D datasets can be enhanced by recent advances in virtual reality (VR) hardware and software. Additionally, the generation, viewing, and manipulation of 3D X-ray diffraction datasets, such as pole figures employed for texture analysis, can also benefit from these advanced visualization techniques. We present newly-developed protocols for porting 3D data (as TIFF-stacks) into a Unity gaming software platform so that data may be toured, manipulated, and evaluated within a more-intuitive VR environment through the use of game-like controls and 3D headsets. We demonstrate this capability by rendering μ-CT data of a polymer dogbone test bar at various stages of in situ mechanical strain. An additional experiment is presented showing 3D XRD data collected on an aluminum test block with vias. These 3D XRD data for texture analysis (χ, ϕ, 2θ dimensions) enables the viewer to visually inspect 3D pole figures and detect the presence or absence of in-plane residual macrostrain. These two examples serve to illustrate the benefits of this new methodology for multidimensional analysis.

Pottery-manufacturing sequences can act as proxies for human migration and interaction. A good example is provided by the ‘spiralled patchwork technology’ (SPT) identified at two key early farming sites in the Ligurian-Provencal Arc in the north-west of the Italian peninsula. SPT is distinct from the ceramic technology used by early farmer communities in south-east Italy that shows technical continuity with the southern Balkans. Macroscopic analysis and micro-computed tomography suggests the presence of two communities of practice, and thus two distinct social groups in the northern Mediterranean: one of southern Balkan tradition, the other (associated with SPT) of as yet unknown origin. The identification of SPT opens up the exciting possibility of tracing the origins and migrations of a second distinct group of early farmers into Southern Europe.

Balance between adipocyte and osteoblast differentiation is the key link of disease progression in obesity and osteoporosis. We have previously reported that formononetin (FNT), an isoflavone extracted from Butea monosperma, stimulates osteoblast formation and protects against postmenopausal bone loss. The inverse relationship between osteoblasts and adipocytes prompted us to analyse the effect of FNT on adipogenesis and in vivo bone loss, triggered by high-fat diet (HFD)-induced obesity. The anti-obesity effect and mechanism of action of FNT was determined in 3T3-L1 cells and HFD-induced obese male mice. Our findings show that FNT suppresses the adipogenic differentiation of 3T3-L1 fibroblasts, through down-regulation of key adipogenic markers such as PPARγ, CCAAT/enhancer-binding protein alpha (C/EBPα) and sterol regulatory element-binding protein (SREBP) and inhibits intracellular TAG accumulation. Increased intracellular reactive oxygen species levels and AMP-activated protein kinase (AMPK) activation accompanied by stabilisation of β-catenin were attributed to the anti-adipogenic action of FNT. In vivo, 12 weeks of FNT treatment inhibited the development of obesity in mice by attenuating HFD-induced body weight gain and visceral fat accumulation. The anti-obesity effect of FNT results from increased energy expenditure. FNT also protects against HFD-induced dyslipidaemia and rescues deterioration of trabecular bone volume by increasing bone formation and decreasing bone resorbtion caused by HFD. FNT’s rescuing action against obesity-induced osteoporosis commenced at the level of progenitors, as bone marrow progenitor cells, obtained from the HFD mice group supplemented with FNT, showed increased osteogenic and decreased adipogenic potentials. Our findings suggest that FNT inhibits adipogenesis through AMPK/β-catenin signal transduction pathways and protects against HFD-induced obesity and bone loss.

Terebellides stroemii Sars, 1835, the type species of the genus, was originally described from the south-west coast of Norway. Over the past 170 plus years this species has been reported from around the world often without a detailed description; in some cases, schematic illustrations of the anterior end with the distinctive branchiae were given. Identifications were likely based mainly on the branchiae consisting of 4–5 lobes but recent work has shown that this character alone has led to misidentifications and confusion of a number of morphologically similar species. Michael Sars (1835) did not designate type specimens for this species. In order to provide an accurate definition of the genus it is necessary to redescribe and characterize the type species including the designation of a neotype. This will provide a baseline against which the potentially undescribed sibling species in the area can be compared and fully described. A large collection of specimens identified as T. stroemii from locations along the coasts of Norway was studied in the Natural History Museum, University of Oslo. This has prompted us to locate material collected by M. Sars (1835) from the vicinity of the type locality and to designate a neotype and provide a comprehensive description of the type species of the genus.

During foetal development, calcium requirements are met as a consequence of maternal adaptations independent of vitamin D status. In contrast, after birth, dependency on vitamin D appears necessary for calcium metabolism and skeletal health. We used a rodent model (Sprague-Dawley rats), to determine if maternal vitamin D deficiency during pregnancy had a deleterious effect on bone structure at birth. Vitamin D deplete females were maintained under deplete conditions until birth of the pups, whereupon all dams were fed a vitamin D replete diet. Offspring were harvested at birth, and 140 days of age. Bones were analyzed using micro-computed tomography and strength tested to study differences in bone structure, density and strength and subjected to elemental analysis using plasma mass spectrometry to determine strontium, barium and calcium contents. Offspring from deplete mothers displayed altered trabecular parameters in the femur at birth and 140 days of age. In addition, at 140 days of age there was evidence of premature mineralization of the secondary ossification centre of the femoral head. Elemental analysis showed increased strontium uptake in the femur of the developmentally vitamin D-deficient offspring. Vitamin D depletion during development in the offspring may have a long-lasting effect, despite repletion of vitamin D from birth. This may have consequences for human health given the low vitamin D levels seen during pregnancy and current lifestyle of sun avoidance due to the risk of skin cancer.

Micro-computed tomography with the highly intense, monochromatic X rays produced by the synchrotron is a superior method to nondestructively measure the local absorption in three-dimensional space. Because biological tissues and cells consist mainly of water as the surrounding medium, higher absorbing agents have to be incorporated into the structures of interest. Even without X-ray optics such as refractive lens, one can uncover the stain distribution with the spatial resolution of about 1 μm. Incorporating the stain at selected cell compartments, for example, binding to the RNA/DNA, their density distribution becomes quantified. In this communication, we demonstrate that tomograms obtained at the beamlines BW2 and W2 (HASYLAB at DESY, Hamburg, Germany) and 4S (SLS, Villigen, Switzerland) clearly show that the RNA/DNA-stained HEK 293 cell clusters have a core of high density and a peripheral part of lower density, which correlate with results of optical microscopy. The inner part of the clusters is associated with nonvital cells as the result of insufficient oxygen and nutrition supply. This necrotic part is surrounded by (6 ± 1) layers of vital cells.

Bone mass is dramatically compromised during periods of weightlessness, inactivity, or bed rest. Animals that hibernate reduce their body temperature, heart rate and metabolic activity, and likewise lower bone turnover activity during their immobile state. Black bears Ursus americanus, however, do not hibernate, but rather overwinter by denning during which they maintain a nearly normal functional heart rate, cardiac output and temperature. Furthermore, markers of bone turnover in black bears are maintained during denning periods. Thus, the purpose of this work was to determine if the denning state of relative immobility in black bears results in changes in bone mass and bone architectural structure. Harvested forelimbs (ulna and radius) were compared between pre- and post-denning black bears using X-ray imaging, dual energy X-ray absorptiometry, and micro-computed tomography to quantify total distal forelimb bone mineral density, cancellous bone mineral density, bone mineral content, bone volume fraction, degree of anisotropy, structure model index, and trabecular thickness. No significant differences in any of the measured parameters were found in comparing radius and ulna from autumn and spring bears in this cross-sectional sample, suggesting that black bears did not experience a significant change in bone mass or architecture during denning. The statistical power for detecting a significant difference (P ≤ 0.05) for this sample was 0.8. The specific mechanism by which the preservation of bone was attained may be related to skeletal muscle interaction or circulating systemic hormones.