Powder X-ray diffraction patterns for three forms of MIL-53(Al), a metal organic framework (MOF) compound with breathing characteristics, were investigated using the Rietveld refinement method. These three samples are referred to as the MIL-53(Al)as-syn (the as synthesized sample), orthorhombic, Pnma, a = 17.064(2) Å, b = 6.6069(9) Å, c = 12.1636(13) Å, V = 1371.3(2) Å3, Z = 4), MIL-53(Al)LT-H (low-temperature hydrated phase, monoclinic P21/c, a = 19.4993(8) Å, b = 15.2347(6) Å, c = 6.5687(3) Å, β = 104.219(4) °, V = 1891.55(10) Å3, Z = 8), and MIL-53(Al)HT-D (high-temperature dehydrated phase, Imma, a = 6.6324(5) Å, b = 16.736(2) Å, c = 12.840(2), V = 1425.2(2) Å3, Z = 4). The crystal structures of the “as-syn” sample and the HT-D sample are confirmed to be the commonly adopted ones. However, the structure of the MIL-53(Al)LT-H phase is confirmed to be monoclinic with a space group of P21/c instead of the commonly accepted space group Cc, resulting in a cell volume double in size. The structure has two slightly different types of channel. The pore volumes and pore surface area were estimated to be 0.11766 (8) cm3/g and 1461.3(10) m2/g for MIL-53(Al)HT-D (high-temperature dehydrated phase), and 0.08628 (5) cm3/g and 1401.6 (10) m2/g for MIL-53(Al)as-syn phases, respectively. The powder patterns for the MIL-53(Al)as-syn and MIL-53(Al)HT-D phases are reported in this paper.

We use density functional theory meta-generalized gradient approximation TPSS + D3(BJ) + U + J calculations to investigate the energetics and geometry of water molecules in the flexible metal-organic framework material Materials of Institut Lavoisier (MIL)-53(Cr) as a function of cell volume. The critical concentration of water to cause the transition from the large pore (lp) to the narrow pore (np) structure is estimated to be about 0.13 water molecule per Cr. At a concentration x = 1 water molecule per Cr, the zero-temperature np and lp configurations each have a hydrogen bond between the H of each framework hydroxyl group and water oxygen (OW). At intermediate volumes, water dimer-like configurations are observed. A concentration x = 1.25 leads to hydrogen bonding between water molecules in the np phase that is absent for x = 1. Our results suggest possible mechanisms for pore closing in hydrated MIL-53(Cr).

A straightforward intuitive user-friendly compact graphical interface, PreDICT (Premier DICVOL Tool) has been developed to take full advantage of the new capabilities of the most recent version of the DICVOL14 Indexing Software. The latter, an updated version of DICVOL04, includes optimizations, e.g. for monoclinic and triclinic cases, a detailed review of the input data from the indexing solutions, cell centering tests, as well as the handling of a moderate number of impurity peaks. Among the most salient features of PreDICT, one can mention the ability (1) to use 2θ non-equistepped input 1D X-ray powder diffraction patterns as can be obtained from 2D detectors, (2) to strip laboratory data from its Kα2 contribution when present, (3) to generate 2θ equistepped output 1D X-ray powder diffraction patterns in both the “.XY” and “.GSA” formats. In addition, PreDICT allows for the following features: (1) full access to the native DICVOL14 input/output ASCII file system is retained, (2) for any selection of a DICVOL14 suggested unit cell, all predicted Bragg peaks up to a certain 2θMAX value are clearly displayed and indicated, thereby emphasizing the contribution of the unaccounted peaks (if any) to the 1D X-ray powder diffraction pattern under current investigation.

Structural characterization and X-ray reference powder pattern determination have been conducted for the Co- and Zn-containing tridymite derivatives Ba(Co1−xZnx)SiO4 (x = 0.2, 0.4, 0.6, 0.8). The bright blue series of Ba(Co1−xZnx)SiO4 crystallized in the hexagonal P63 space group (No. 173), with Z = 6. While the lattice parameter “a” decreases from 9.126 (2) Å to 9.10374(6) Å from x = 0.2 to 0.8, the lattice parameter “c” increases from 8.69477(12) Å to 8.72200(10) Å, respectively. Apparently, despite the similarity of ionic sizes of Zn2+ and Co2+, these opposing trends are due to the framework tetrahedral tilting of (ZnCo)O4. The lattice volume, V, remains comparable between 626.27 Å3 and 626.017 (7) Å3 from x = 0 to x = 0.8. UV-visible absorption spectrum measurements indicate the band gap of these two materials to be ≈3.3 and ≈3.5 eV, respectively, therefore potential UV photocatalytic materials. Reference powder X-ray diffraction patterns of these compounds have been submitted to be included in the Powder Diffraction File (PDF).

This work was undertaken in preparation for a survey to assess the exposure of carpenters to hazardous dust working in construction. Inhalable dust, in this industry, was expected to contain both crystalline mineral and amorphous phases (wood dust). The Rietveld method was applied to provide a simultaneous multicomponent analysis. To assess its performance, mixtures of aerosolised calcite, gypsum, quartz, kaolinite, and wood dust were collected onto quartz fibre filters (n = 41) using the Button inhalable sampler. Results obtained using Rietveld were compared with loaded mass and those from external standard calibrations. The measured content of a component in 14 samples was used as an internal standard by Rietveld to determine amorphous content (wood). The performance of the Rietveld and external standard methods was similar. The 95% confidence interval for the absolute differences between the two methods was 15%. Only one relative difference of more than 15% had a mass loading >0.5 mg. An approach for assessing the limits of detection with relative intensity ratios was applied and gave comparable values with the usual method using calibration coefficients from the external standard method. Rietveld is therefore a potentially useful multicomponent method for the measurement of dust aerosol to help better understand workers' exposures.

History of the development of the reciprocal lattice is reviewed. The reciprocal lattice as an essential tool for the study of diffraction experiments by ordered structures and characterization of their structural properties is widely taught in any text of solid state or chemistry, but usually without discussion of its history. This article aims to give a coherent historical perspective on the reciprocal lattice. First, a basic introduction to the reciprocal lattice concept, its mathematical foundation and physical origin, and its relationship with the direct lattice is provided. Then a detailed chronicle of ideas leading to the concept of the reciprocal lattice is presented, including a review of the contributions of Gibbs, Ewald, and others. The polar lattice concept, the great ancestor of the reciprocal lattice, is presented.

The crystal structures of cefdinir and cefdinir sesquihydrate have been solved and refined using synchrotron X-ray powder diffraction data, and optimized using density functional techniques. Cefdinir crystallizes in space group P21 (#4) with a = 5.35652(4), b = 19.85676(10), c = 7.57928(5) Å, β = 97.050(1) °, V = 800.061(6) Å3, and Z = 2. Cefdinir sesquihydrate crystallizes in space group C2 (#5) with a = 23.98775(20), b = 5.01646(3), c = 15.92016(12) Å, β = 109.4470(8) °, V = 1806.438(16) Å3, and Z = 4. The cefdinir molecules in the anhydrous crystal structure and sesquihydrate have very different conformations. The two conformations are similar in energy. The hydrogen bonding patterns are very different in the two structures, and the sesquihydrate is more stable than expected from the sum of the energies of cefdinir and cefdinir sesquihydrate, the result of additional hydrogen bonding. The powder patterns are included in the Powder Diffraction File™ as entries 00-066-1604 (cefdinir) and 00-066-1605 (cefdinir sesquihydrate).

X-ray powder diffraction data, unit-cell parameters, and space group for 17- hydroxy-16-methyl-9,11-epoxypregna-1,4,6-triene-3,20-dione, C22H26O4, are reported [ a = 18.435(1) Å, b = 12.269(3) Å, c = 8.251(5) Å, α = 90°, β = 90°, γ = 90°, unit-cell volume V = 1866.43 Å3, Z = 4, ρcal = 1.261 g cm−3 and space group P212121]. All measured lines were indexed and are consistent with the P212121 space group. No detectable impurities were observed.

Capecitabine (Xeloda) is a chemotherapy drug used to treat breast, gastric, and colorectal cancers. Commercial capecitabine crystallizes in the orthorhombic space group P212121 (#19) with a = 5.20587(3), b = 9.52324(4), c = 34.79574(21) Å, V = 1725.062(12) Å3, and Z = 4. A reduced cell search in the Cambridge Structural Database (Groom C. R., Bruno, I. J., Lightfoot, M. P., and Ward, S. C. (2016) Crystallogr. Sect. B: Struct. Sci., Cryst. Eng. Mater.72, 171–179) yielded three previous structure determinations (Rohlicek, J., Husak, M., Gavenda, A., Jegorov, A., Kratochvil, B., and Fitch, A. (2016). Acta Cryst. Sect. E: Crystallgr. Commun.72, 879–880, BOVDUM; Malińska, M., Krzeczyński, P., Czerniec-Michalik, E., Trzcińska, K., Cmoch, P., Kutner, A., and Woźniak, K. (2014). J. Pharm. Sci.103, 587–593, BOVDUM01 and BOVDUM02), using synchrotron powder data and later single crystal data at two temperatures. In this work, the sample was ordered from United States Pharmacopeial Convention (lot # G0J205), and analyzed as-received. The room temperature (295 K) crystal structure was refined using synchrotron (λ = 0.413914 Å) powder diffraction data, density functional theory (DFT), and Rietveld refinement techniques. Hydrogen positions were included as part of the structure, and were re-calculated during the refinement. The diffraction data were collected on a beamline 11-BM at the Advanced Photon Source, Argonne National Laboratory and the powder X-ray diffraction pattern of the compound is provided. The agreement of the Rietveld-refined and DFT-optimized structures is poorest in the pentyl side chain, consistent with the disorder observed previously.

The third edition of the To.Sca.Lake Summer School, co-sponsored by ICDD, was organized on the Como Lake shore in Northern Italy, and has seen the participation of more than 50 attendees from four different continents. The main topic was Total Scattering Analysis in the real and reciprocal spaces (by the Pair Distribution Function and the Debye Scattering Equation approaches, respectively). with additional contributions on Small Angle X-ray Scattering and Light Scattering methods, the latter proposed in the static and dynamic modes.