Illite crystallinity data from the Silurian slate belts of England and Wales indicate anchizone to low epizone metamorphism during the Acadian deformation in late Early Devonian time. This metamorphic grade implies a substantial overburden, now eroded, of Lower Devonian non-marine sediments of the Old Red Sandstone (ORS) magnafacies. A minimum 3.5 km pre-tectonic thickness of ‘lost’ ORS is estimated in the southern Lake District and comparable thicknesses in North Wales and East Anglia. Tectonically driven subsidence of the underlying Avalonian crust is required to accommodate such thicknesses of non-marine sediment. One proposed mechanism is flexure of the Avalonian footwall during convergence that continued from Iapetus closure in the Silurian until Acadian cleavage formation in the Emsian. The evidence for this model in the critical area of northwest England is reviewed and found to be unconvincing. An alternative model is developed following a recent suggestion that the Early Devonian was a period not of continued convergence but of orogen-wide sinistral transtension. Transtensional accommodation of the lost ORS is evidenced by Early Devonian extensional faults, by synchronous lamprophyric magmatism, and by compatibility with previously diagnosed sediment provenance patterns. A summary of Siluro-Devonian tectonostratigraphy for Britain south of the Highland Border emphasizes that, unlike the Scottish Highlands, this area was not affected by the Scandian Orogeny, but was by the Acadian. An important period of sinistral transtension in the Early Devonian (c.420–400 Ma) was common to both regions. This was a time of high heat flow, lamprophyric and more evolved magmatism, and major southward sediment transport, involving mainly recycled metamorphic detritus from the Highlands and from contemporaneous volcanicity. Old Red Sandstone, deposited in coalescing transtensional basins over much of Britain from the Midland Valley to the Welsh Borders, was largely removed and recycled southward during Acadian inversion.

In the Putorana region of the Siberian continental flood basalt province, tuffs form thin layers or small bodies between single basaltic lava flows. Based on our fieldwork, these ash fall deposits have relatively small volumes (≤100 000 m3) compared with the associated basaltic flows and the tuffs of the adjacent Noril'sk region in the north. Six tuff units with different degrees and modes of alteration were analysed by XRD, SEM and XRF in order to determine mineralogical and chemical changes which occurred during progressive alteration. Pyroxene compositions and immobile element ratios suggest that the tuffs were derived from a basaltic lava like the flood basalts. Post-eruptive, low-temperature alteration processes have significantly changed the primary composition of the tuffs. Therefore the different tuffs have variable petrography, mineralogy and geochemistry (MgO 5.2–9.2 wt %, SiO2 33.6–69.1 wt % and TiO2 0.6–1.6 wt %) compared to the tholeiitic basalts in which they are interbedded. Crystallization of secondary minerals, such as carbonate, clay minerals, zeolites and analcime, occurred from circulating fluids. The results show that the fluid compositions varied significantly between the different tuffs. This implies that the elements behaved differently depending on the circulating agent, which led to the formation of different minerals. In addition, two samples show an input of quartz, derived either by wind from terrigenous sediments or generated by magma–sediment interaction, and one sample was deposited in a subaqueous, possibly lacustrine environment. These results indicate that the conditions during alteration varied despite the close spatial relationship of the tuffs and that a generalization about the alteration processes cannot be made in the Putorana region. The analyses of the clay minerals show alteration of chlorite to vermiculite. Interestingly, corrensite (a regularly stacked, 50/50 mixed layered clay mineral composed of chlorite and vermiculite) is still preserved in two samples. This indicates different alteration stages in the different tuff outcrops. The state of alteration deduced from immobile element ratios, plagioclase compositions and mineral assemblages shows contradictory results. This suggests that the state of alteration is best deduced from clay minerals, as one can follow this process step by step.

The model of a foreland propagating sequence already presented for the External Hellenides is significantly modified in this paper. New data are used, including structural maps, cross-sections, stratigraphic determinations and seismic profiles. In general, thrusts formed a foreland propagating sequence but they acted simultaneously for a long period of time. Thus, during the Middle Eocene the Pindos thrust resulted in the formation of the Ionian–Gavrovo foreland and acted in tandem with the newly formed Gavrovo thrust within the basin until the Late Oligocene. The Gavrovo thrust consists of segments, showing that out-of-sequence thrusting was important. Thrust nucleation and propagation history is strongly influenced by normal faults formed in the forebulge region of the Ionian–Gavrovo foreland basin. Shortening rates within the Gavrovo–Ionian foreland are low, about 1 mm/year. Although thrust load played an important role in the formation of this basin, the additional load of 3500 m thick clastics in the basin enhanced subsidence and underthrusting.

Proprionoglarisguyoti gen. nov., sp. nov., Parapsyllipsocus vergereaui gen. nov., sp. nov., and Prospeleketoralbianensis gen. nov., sp. nov. are described from the Early Cretaceous amber of Archingeay (SW France). Libanoglarismouawadi gen. nov., sp. nov. is described from the Early Cretaceous amber of Lebanon. They are all placed into the suborder Trogiomorpha, incertae familiae. The discovery of these new taxa together with a first phylogenetic analysis of the trogiomorphan families demonstrate the necessity of a cladistic redefinition of the currently admitted major subdivisions of this suborder.

Palaeomagnetic studies have been carried out on Neoproterozoic, Cambrian and Ordovician rocks in the Nuneaton inlier, England (52.5° N, 1.5° W). Three magnetic components were recognized, which provide a consistent structural and magnetic history of the inlier. Neoproterozoic volcaniclastic and intrusive rocks acquired a characteristic remanent magnetization (ChRM) dated at 603Ma. Late Ordovician rocks are represented by lamprophyre and diorite intrusions and their ChRMs were probably imprinted during their emplacement, at about 442 Ma. The Lower Cambrian sedimentary sequence of the Hartshill Sandstone Formation, which unconformably overlies the Neoproterozoic rocks and hosts the Ordovician intrusions, does not preserve a primary magnetization but shows the imprints of the Late Ordovician (442 Ma) remagnetization, as well as a probable end-Carboniferous remagnetization. Palaeolatitudes calculated for the late Neoproterozoic rocks and Ordovician intrusions are in good agreement with other palaeolatitudes calculated for Avalonia during those times. Both the late Neoproterozoic and Late Ordovician rocks additionally show ChRMs with declination anomalies indicating a large tectonic rotation of the Nuneaton area, possibly during one of the Caledonian phases of deformation affecting southern Britain.

The thermal properties of rocks in the upper crust of the Qaidam basin are given based on measurements of 98 thermal conductivities and 50 heat production values. Nineteen new measured heat flow data were obtained from thermal conductivity data and systematic steady-state temperature data. This paper contributes 28 calculated heat flow values for the basin for the first time. Examination of 47 heat flow values, ranging from 31.3 to 70.4 mW/m2 with an average value of 52.6±9.6 mW/m2, gives the heat flow distribution character of the basin: high heat flows over 60 mW/m2 are distributed in the western and central parts of the basin. Lower heat flow values are found in the eastern part and north marginal area of the basin, with values less 40 mW/m2. The Qaidam basin heatflow data show a linear relationship between heatflow and heat production, based on thermal structure analysis. The thermal structure of the lithosphere is characterized as having a ‘hot crust’ but ‘cold mantle’. Heat production in the upper crust is a significant source of heat in the basin and contributes up to 56.8% of the surface heat flow. The heat flow province is of great geophysical significance, and the thermal structure of the area gives clues about the regional geodynamics. Study of the Qaidam basin thermal structure shows that the crust has been highly active, particularly during its most recent geological evolution. This corresponds to Himalayan tectonic movements during latest Eocene to Quaternary times in the region of the Qinghai–Tibet Plateau. Since the Qaidam basin is in the northeastern area of the Qinghai–Tibet Plateau, the heat flow values and the thermal structure of the basin may give some insight into the thermal state of the plateau, and study of thermal regime of the Qaidam basin could in turn provide useful information about the tectonics of the Qinghai–Tibet Plateau.

The elliptical and hyperbolic outcrop patterns characteristic of periclinal folds can be used to classify structures according to different curvature attributes. Elliptical patterns indicate domal-basinal structures with synclastic curvature, that is, principal curvatures of the same sign. Hyperbolic patterns are diagnostic of anticlastic curvature (saddle-like structures). Such outcrop geometries are geological examples of Dupin's indicatrix, the geometrical figure obtained by sectioning a curved surface on a plane parallel and almost coincident with the tangent plane. The aspect ratio of Dupin's indicatrix is theoretically related to the ratio of the principal curvature values for the part of the structure being considered. This new method allows quantitative assessment of structures on maps and on remote sensing images. Illustrations are given from Wyoming, USA, and Yorkshire, England.