Hostname: page-component-cd9895bd7-jn8rn Total loading time: 0 Render date: 2024-12-22T22:08:24.236Z Has data issue: false hasContentIssue false

A LATE HELLADIC IIIC EARLY DEPOSIT FROM KOKOTSIKA PLOT IN KASTRO/PALAIA (VOLOS)

Published online by Cambridge University Press:  15 June 2022

Bartłomiej Lis*
Affiliation:
Institute of Archaeology and Ethnology, Polish Academy of Sciences
Anthi Batziou
Affiliation:
Ephorate of Antiquities of Magnesia
Rights & Permissions [Opens in a new window]

Abstract

This article presents a Late Helladic IIIC Early deposit of pottery and small finds deriving from rescue excavations at the Kokotsika plot in Kastro/Palaia, within the modern city of Volos. It is the first systematically published deposit from that site, providing data on stratigraphy, small finds, pottery typology, decoration, fabrics and use-wear patterns, supplemented with detailed statistics. A particular feature of the recovered assemblage is the comparatively high frequency of Handmade Burnished Ware, as well as the presence of Grey Ware, both seen as products of people deriving from the Italian peninsula. The presented deposit provides valuable new data both for the site of Kastro/Palaia, as well as for the region of coastal Thessaly. The revealed remains and stratigraphy might be related to the structures exposed in nearby plots by earlier excavation campaigns of D. Theocharis. The deposit documents most likely a slightly later stage of Late Helladic IIIC Early compared to what is present at the abandonment deposits at Dimini and Pefkakia. As such it provides new clues for the reconstruction of regional history, confirming earlier views that Kastro/Palaia attracted people who left other habitation sites in the area.

Αποθέτης της ΥΕ ΙΙΙΓ Πρώιμης από το οικόπεδο Κοκότσικα στο Κάστρο/Παλαιά (Βόλος)

Το άρθρο παρουσιάζει την κεραμική και τα μικρά ευρήματα ενός αποθέτη της Υστεροελλαδικής ΙΙΙΓ Πρώιμης που εντοπίστηκε σε σωστική ανασκαφή στο οικόπεδο Κοκότσικα στο Κάστρο/Παλαιά, μέσα στη σύγχρονη πόλη του Βόλου. Είναι το πρώτο συστηματικά δημοσιευμένο σύνολο από αυτή τη θέση, παρέχοντας στοιχεία για στρωματογραφία, μικρά ευρήματα, κεραμική τυπολογία και διακόσμηση, κεραμικές ύλες και ίχνη χρήσης-φθοράς, το οποίο συνοδεύεται με λεπτομερή στατιστική ανάλυση. Ένα ιδιαίτερο χαρακτηριστικό του αποκαλυφθέντος συνόλου είναι η συγκριτικά υψηλή συχνότητα χειροποίητης στιλβωμένης κεραμικής, καθώς και η παρουσία γκρίζας κεραμικής, που θεωρούνται και οι δύο ως προϊόντα πληθυσμού με προέλευση την ιταλική χερσόνησο. Ο αποθέτης που παρουσιάζεται παρέχει πολύτιμα νέα δεδομένα τόσο για τη θέση Κάστρο/Παλαιά, όσο και για την περιοχή της παράκτιας Θεσσαλίας. Τα αποκαλυφθέντα κατάλοιπα και η στρωματογραφία θα μπορούσαν να συσχετιστούν με αρχιτεκτονικές δομές που είχαν αποκαλυφθεί σε πλησιόχωρα οικόπεδα κατά τη διάρκεια παλαιότερων ανασκαφικών ερευνών από το Δ. Θεοχάρη. Ο αποθέτης τεκμηριώνεικατά πάσα πιθανότηταμια ελαφρώς μεταγενέστερη φάση της ΥΕ ΙΙΙΓ Πρώιμης σε σύγκριση με αυτή που υπάρχει στον ορίζοντα εγκατάλειψης στο Διμήνι και στα Πευκάκια. Κατά συνέπεια ο υπό μελέτη αποθέτης παρέχει νέα στοιχεία για την ανασύνθεση της τοπικής ιστορίας, καθόσον θεωρείται ότι το Κάστρο/Παλαιά προσείλκυσε πληθυσμό ο οποίος εγκατέλειψε άλλες κατοικημένες θέσεις στην περιοχή.

Type
Articles
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
Copyright © The Author(s), 2022. Published by Cambridge University Press on behalf of The Council, British School at Athens

INTRODUCTION

The settlement at Kastro/Palaia (Volos) is situated on the coast of the north bay of the Pagasetic Gulf. The site has been densely populated from prehistoric times until the present day, and is almost totally covered by modern buildings. In 1956, D. Theocharis (Reference Theocharis1956a; Reference Theocharis1956b) started systematic excavations on the west slope of the hill in Kastro/Palaia (Fig. 1), revealing, in his Trench III, impressive architectural remains that he ascribed to two successive palaces. Unfortunately, only short preliminary reports presented these important findings, and final publication was never accomplished. Late Bronze Age pottery was studied in the 1990s by Anthi Batziou in the framework of her PhD (Batziou-Efstathiou Reference Batziou-Efstathiou1998), but this study was hindered by the lack of comprehensive documentation from the old excavation. More recently, a program of restudy of finds from Theocharis’ excavation with limited reinvestigations in his Trench III has been carried out (Skafida et al. Reference Skafida, Karnava, Georgiou, Agnousiotis, Karouzou, Kalogianni, Asderaki, Vaxevanopoulos, Georgiou, Topa, Dionisiou, Tsoumousli, Margaritof and Mazarakis Ainian2020, with further bibliography). In addition to these investigations, several rescue excavations were carried out at various plots on Kastro/Palaia by local archaeologists. Twenty meters to the east of Trench III, an interesting excavation was conducted in 1988 by Z. Malakasioti (Reference Malakasioti1988; Reference Malakasioti1989; see also Batziou-Efstathiou Reference Batziou-Efstathiou1998) at A. Kokotsika plot (Velissariou street 38; Fig. 1), in a trench measuring 4 x 3.5 m. It provided important insights into the diachronic picture of the site, and in particular into the Late Helladic (LH) IIIC Early period that constitutes the topic of this article.

Fig. 1. General plan of Kastro/Palaia in Volos with locations of Theocharis’ Trench III and Kokotsika plot excavations. Based on Theocharis Reference Theocharis1956a, fig. 44 and Skafida et al. Reference Skafida, Karnava, Agnousiotis and Georgiou2018a, fig. 55.

EXCAVATION AND CONTEXT

The following account is based on the excavation notebooks kept at the Ephorate of Antiquities of Magnesia. In total, nine habitation levels were distinguished. The upper levels, numbered 9–7, excavated at a depth of 1.25–4.93 m,Footnote 1 are dated to the Byzantine, Archaic, Geometric, Protogeometric and LH IIIC Late periods. The remains of the LH IIIC Early and Middle phases are scarce in general, mostly restricted to successive floors, sometimes cut by refuse pits, with accumulations containing pottery and artefacts (Batziou-Efstathiou Reference Batziou-Efstathiou1998, 253–62). Level 6, at a depth of 4.93–6.05 m, is dated to LH IIIC Middle. Level 5, excavated from a depth of 6.05 to 6.35 m, with its uppermost part dated to LH IIIC Early, is the most interesting in terms of its pottery assemblage, deriving from a well-stratified context. This fact was the reason for the re-examination and study of the material of this particular level. Architectural remains containing a mix of decorated Mycenaean, local painted pottery in Middle Helladic tradition, unpainted and usually hand-made and burnished open shapes characterise the three levels numbered 4–2, from a depth of 6.35 to 7.10 m. They date to the Palatial and the Pre-palatial Mycenaean periods. Level 1 at a depth of 7.10 to 7.34 m features architectural remains and yielded purely Middle Bronze Age pottery.

Level 5 (depth 6.05–6.35 m; Fig. 2)

Starting from the depth of 6.05 m, the soil was mixed with clay and many charcoals. In the middle of the trench, there was an intensively burned area measuring approximately 0.80 x 0.60 m. This level produced abundant pottery and some small finds: a steatite conulus BE 6717,Footnote 2 bronze slag and some highly corroded unidentified metal finds, as well as part of a glass bead BE 6719.

Fig. 2. Photograph showing level 5 during excavation. Arrow pointing to approximate N. Author: Z. Malakasioti. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

In the north-east corner of the trench (Fig. 3), at a depth of 6.15 m, the excavator reports part of a hearth made of three successive layers of clay: the lower layer was of clay and contained pieces of charcoal and ashes, the middle layer of clay was thin, red, highly burned, and, above them, the third clay layer was likewise thin, with sherds of Handmade Burnished Ware on it, visible in Fig. 3. Around this hearth, bits of bronze slag, pottery and small finds were gathered. Among the small finds there were some unidentified heavily corroded bronze objects, part of an ivory object with holes BE 6734, two bone pins BE 6712, 6715, part of a Mycenaean figurine BE 6713, and a bronze ring BE 6714. A cavity with a diameter of 0.135 m and 0.20 m deep, plastered with clay only in its upper 0.14 m, was found in the middle of the hearth.Footnote 3

Fig. 3. Photograph showing detail of the hearth with sherds on top and a post hole, seen from SW. Author: Z. Malakasioti. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

The stone foundation of a wall (preserved length 1.65 m, width 0.50 m), constructed with big schist slabs, was found in the south of the trench, 0.75 m from the west and 1.95 m from the east baulk. According to the excavator, a large number of stones found in the layers above might have belonged to this destroyed wall. It is not visible in the photograph (Fig. 2), probably because it had already been removed when the photo was taken, but some stones can be seen sticking out from the southern baulk that might have belonged to it. There might be yet another wall visible in the south-west corner with three stones in the same north–south alignment.

Part of the foundation of a second wall (preserved length 1.32 m, width 0.54 m) with north–south orientation was uncovered in the north part of the trench (Fig. 2). The excavator considered it possible that this wall was connected with the other destroyed wall mentioned above.

Abundant pottery that came from bags labelled with depths of 6.05 and 6.15 represents a chronologically coherent assemblage, with numerous joins between various bags. It dates to the LH IIIC Early period, and constitutes the main topic of this article. Hereafter it will be referred to as ‘the deposit’.

At a depth from 6.15 to 6.27/6.35 m, a thick destruction layer (as described by the excavator) covered the trench with two successive layers of mud bricks mixed with pieces of plaster and of green pebbles, and below them, burned clay with much charcoal and ash. The pottery was much less abundant in this level, and only two small finds were registered: a Psi-type figurine BE 6881, and an obsidian blade BE 6682. Beneath it, a white plaster floor was revealed at a depth of 6.27 to 6.35 m, which was better preserved in the south and west part of the trench. It is readily visible in the excavation photo (Fig. 2). This plaster floor might have been repaired with green pebbles preserved towards the east side of the trench.

In the south-west corner of the trench, a structure formed with stones and clay was interpreted as a possible hearth. In the middle of it, another cavity with a diameter of 0.20 m and depth of 0.16 m was found. As visible in the excavation photo (Fig. 2), this cavity is made in the plaster floor, and therefore the entire structure may be related to the use period of this floor.

Only a limited amount of material was associated with this plaster floor, or in general with the levels below the LH IIIC Early deposit. It consisted predominantly of unpainted open shapes, such as shallow cups and kylikes, as well as conical cups with string-cut bases. The few decorated sherds were no later than the LH IIIA2 period and included a linear kylix base and a linear body sherd from a rhyton.

Stratigraphic levels below the depth of 6.35 m, i.e. below the level of the plaster floor, confirm this early date, as the latest decorated material does not post-date LH IIIA.

Refuse pit

In the north part of the trench, between the wall and the hearth, a circular refuse pit (diameter of 1.20 m) was identified at a depth between 6.27 and 7.72 m, cutting through earlier levels. As it cut through the white plaster floor (Fig. 2), and includes chronologically mixed material with latest fragments dating to LH IIIC Middle–Late, it represents significantly later activity.Footnote 4 The pit was filled with ash, charcoal, burned clay, pottery, as well as small finds such as a millstone BE 6680, two clay spools BE 6707, 6723, part of an anthropomorphic figurine BE 6708, part of an animal figurine BE 6722, shells of Patella caerulea that had been collected without the mollusc and were beach-worn (examined by R. Veropoulidou), as well as other species constituting unambiguous food remains.

Although the pit was first recognised at a depth of 6.27 m, according to the pottery found inside it must also post-date the activity attested with the LH IIIC Early level starting at 6.05 m. In the excavation photo (Fig. 2) a pile of stones is visible above the pit, reaching high above the plaster floor and the hearth uncovered at 6.15 m. These stones could therefore have formed part of the original pit fill, perhaps placed there to seal its mouth.

The proximity of the two excavations, Kokotsika plot and Theocharis’ Trench III (Fig. 1), and the stratigraphy of the Kokotsika plot with a white plaster floor at roughly the same depth as two white plaster floors revealed in Trench III (Skafida et al. Reference Skafida, Karnava, Georgiou and Agnousiotis2018b, 73, drawing 1) could suggest that they may be related, and perhaps belong to the same large Mycenaean complex. Theocharis considered these plaster floors as belonging to two consecutive palaces, one of the fourteenth century BC, the other of the thirteenth century BC, destroyed by fire early in the twelfth century BC. According to the pottery found below and above the plaster floor in the Kokotsika plot excavations, it could be linked to the earlier of the two floors found by Theocharis. The use of plaster floors could be a key element that distinguishes and differentiates the buildings where they were found from any other structures excavated so far in Kastro/Palaia dating to the palatial period (Batziou Reference Batziouin print).

PRESENTATION OF POTTERY

Introduction

The deposit from Kokotsika plot at Kastro/Palaia (Volos) presented here can be confidently placed in the LH IIIC Early period. On the one hand, it contains pieces that are not present in the LH IIIB2 Thessalian assemblages, like the painted carinated cup or linear deep bowl; on the other it lacks typical diagnostics of the ensuing LH IIIC Middle period known from Kastro/Palaia or Velestino, such as trays, large pictorial kraters, or reserved bands on the interiors of deep bowls. More precise synchronization with published deposits from Thessaly and other regions of Central and Southern Greece will be offered below.

In terms of deposit type, the Kokotsika plot cannot be considered a floor deposit. This is strongly suggested by the fact that among the mendable pottery there are no examples that would be close to a complete preservation. In fact, only one vessel (cup KP No. 38) has more than 50 per cent of its rim preserved, but even this piece does not preserve more than half of the entire vessel.Footnote 5 In addition, there are three vessels that preserve more than 40 per cent of the rim, and another three with more than 30 per cent of the rim preserved. This shows that we are dealing predominantly with parts of vessels, plus numerous single sherds. As the excavated area is not insubstantial, the lack of the remaining parts of better-preserved vessels cannot be explained as a result of a partial recovery of a larger floor deposit. Also, although the material presented here derives from rescue excavations, even small and undecorated sherds were kept. It is therefore likely that we are dealing here with a fill or dump. Whether the material originally accumulated in this location (and is thus in situ) or was redeposited from elsewhere (i.e. is in a secondary position), for instance in an attempt to raise the level, cannot be answered with the evidence at hand.

In total, 168 rim fragments (after mending) were counted, of which 14 were considered earlier than the core of the deposit, and one was identified as a later intrusion. As the non-contemporary material comes in the form of single sherds, its share in the assemblage is lower than what the simple rim count would suggest. Earlier pottery accounts for only 5 per cent of the entire assemblage, and so the material can be considered as chronologically quite homogenous.

Preservation

The pottery has on average a fair degree of preservation, but some variability is apparent, and consistent with the suggestion that it is not a floor deposit. Apart from the wear resulting from use (see below), many sherds display a medium degree of wear of their surfaces and edges, possibly to be explained as a result of exposure to moderate weathering. Nevertheless, some pieces have fresh sharp edges showing that they were not exposed for too long. Regarding the mendability rate, among 154 rim fragments, 25 were mended from two or more fragments. The average rim preservation is 7.5 per cent. The only other deposit for which comparable statistics are available is an LH IIIA1 pit from Kontopigado, and there this index is somewhat higher and amounts to 9.6 per cent (Kaza-Papageorgiou and Kardamaki Reference Kaza-Papageorgiou and Kardamaki2018, 7, table 1). The difference seems to result from a different type of context, as pits usually favour higher mendability.

Quantification method

In terms of pottery quantification, the decision was made to employ a method based on estimated vessels equivalents (EVE) for rims. The method involves measuring the percentage of the original circumference that a particular fragment preserves. It is usually done with a simple diameter chart that is divided into sections representing 10 or 5 per cent of the entire circumference. For this reason, it is only applicable to rims and bases, and not for features like handles or legs. The use of this method is not widespread in publications of prehistoric pottery in the Aegean,Footnote 6 yet according to a classic textbook by Orton, Tyers and Vince (1993, 171) ‘the vessel-equivalent is the only measure that is unbiased, both for measuring proportions within an assemblage and for comparing them between the assemblages’. Besides these unquestionable advantages, which are not common to other counting systems used in the field (feature and sherd counts, minimum number of individuals [MNI]), the other aspect of this method whose benefits are particularly clear is that it differentiates between vessels that are well preserved, irrespective of whether broken up into many pieces or complete, and single sherds. In the case of some other quantitative approaches (notably MNI), both a complete vessel and a single rim sherd would be counted as one. Here we have decided to restrict ourselves to rims only and exclude bases, as they are subject to the problem of ‘chunky types’ (i.e. they break into relatively few pieces) that is most acute in smaller assemblages (Orton, Tyers and Vince Reference Orton, Tyers and Vince1993, 174).

Recording procedure

A modification of a system that splits the pottery according to fabrics (fine; medium-coarse; coarse) towards one that reflects functional differences – or pottery classes (Rutter Reference Rutter1995; Hale Reference Hale2016) – was applied here. Following the standard approach, fine pottery, comprising mostly tableware, was subdivided into patterned, linear, monochrome and unpainted. Cooking pottery represents basically the only unburnished medium-coarse pottery in the deposit. Medium and large closed shapes used for short-term storage that could form another category in the medium-coarse fraction, in the case of coastal Thessaly are best described as medium fine rather than medium coarse. Therefore they were treated together with the rest of the fine pottery. The storage category consists of thick-walled pithoi with considerable amounts of non-plastic inclusions, that would usually – but not invariably – fall into the coarse fraction. Two additional classes were differentiated. One is Handmade Burnished Ware (HBW), comprising medium-coarse dark-fired fabrics with burnished surfaces. It must be stressed that despite its crude appearance, it rarely falls into the coarse category as traditionally defined, i.e. containing inclusions exceeding 4 mm in size (see below). The other class is Grey Ware, which belongs to fine pottery, and is distinguished by the grey clay colour of both surface and fracture, and burnished to polished surfaces. It can be differentiated from optically very similar Middle Helladic Grey Minyan mostly by way of its different morphological range. Grey Minyan was seemingly absent in this deposit, except perhaps in the form of small body sherds not readily assignable to a specific shape. However, due to the counting method employed, which considers only rims, this issue is eliminated.

Inventorying strategy and illustrations

In the inventorying process, preference was given to mendable material, as this has the highest odds of belonging to the core deposit representing a chronologically more coherent group than single sherds that may be coming from, for instance, disintegrated mudbricks. Indeed, all identified earlier fragments were single sherds with the exception of two bases – one of which was clearly reworked and repurposed (KP No. 29), while the other one could have also served as a stopper (KP No. 28) – and two stirrup jars (KP Nos 30–31; see the discussion below).

In accordance with this strategy, almost all mendable fragments were inventoried. Exceptions were body fragments lacking patterned decoration, as well as two lower body fragments of deep bowls consisting of several fragments, but with few actual joins among them. The inventoried material thus provides a good overview of the entire deposit that is supplemented by frequencies based on all rim sherds. Due to the importance of HBW and Grey Ware, in the case of these two classes also single fragments were inventoried. With regard to motifs, non-inventoried material is mentioned in the discussions of specific shapes.

The majority of inventoried pottery is illustrated with drawings and colour photographs. The remainder, consisting of a few undecorated or linear-painted fragments, are shown with photographs. In Figs 45, 711, 13 and 1521, line drawings are shown alongside colour photographs of the same fragments in the same scale. Care was taken to correctly stance the fragments while taking photographs; in those rare cases when this was not possible, the photographed pieces may appear slightly bigger than on the drawings.

Fig. 4. Decorated deep bowls. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Fig. 5. Decorated deep bowls. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

The majority of non-inventoried fragments mentioned in the discussion are illustrated with photographs in Figs 6, 12 and 14.

Fig. 6. Photographs of non-inventoried open shapes mentioned in the text. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Contrary to the common practice in pottery studies in the Aegean, no Munsell readings were taken on inventoried pottery. We hope that the rich photographic documentation taken in the same, neutral light conditions will compensate for this unorthodox approach. We believe that for the purposes of comparison (both within the presented assemblage and between pottery from various sites), colour photographs provide a much more useful basis.

Catalogue

Abbreviated catalogues for inventoried pottery and small finds are provided as tables in the online-only Supplementary Material (Tables A1 and A2). For pottery, they list both Furumark Shape (FS, when precisely identifiable) and Furumark Motif (FM, when applicable), which are omitted in the discussion below, as well as the number of fragments and rim and base diameters.

Frequencies of functional classes

Regarding the general composition (Table 1), the deposit represents a rather typical domestic assemblage of LH IIIC Early period, with one major exception being the extremely high share of Handmade Burnished Ware. Among the fine pottery, the painted fraction outnumbers the unpainted pottery by 2:1 (Table 2), but the unpainted variety is more prominent among the open shapes (40% vs 32%; Table 3). Such a relationship is most characteristic for quantified LH IIIC Early deposits, and dramatically different to what had been the case for the previous LH IIIB period, when the shares of the two broad categories were reversed (Thomas Reference Thomas2005, 459, table 2). Open shapes dominate the entire fine fraction, as well as its painted and unpainted subgroups, in each case representing more than 70 per cent (Table 2). Within the painted pottery, the share of monochrome types is negligible for open shapes, but impressively high (>50%) among the closed vessels (Table 3). Linear and patterned decorative schemes have roughly equal shares among open shapes, but within the closed vessels the patterned variety is practically non-existent, being limited to two stirrup jars and one body sherd of a larger closed shape (Table 3). Grey Ware represents a particular subset of fine pottery, with a small share of 1.4 per cent (Table 1). There is no identifiable medium-coarse pottery other than cooking pots, which, with a share of less than 8 per cent (Table 1), make up a comparatively small part of the assemblage.Footnote 7 Among the published pottery groups that are chronologically close to the deposit presented here, only the LH IIIB2 Causeway deposit (layer C) from Mycenae has a similar share of cooking pottery (Wardle Reference Wardle1973). In the case of the deposit presented here, this is most likely directly related to the very high share of HBW, which amounts to 14 per cent (Table 1). The fact that the frequency of this particular group at the majority of other sites does not exceed 1 per cent shows clearly how striking the difference in this respect is. The possible reasons for such a high share will be outlined in the later part of this article; suffice it to say here that the fact that some of the HBW vessels might have been used for food preparation may account for a low percentage of cooking pottery in the Kokotsika plot deposit. Finally, large storage containers (pithoi) represent 3 per cent of the entire assemblage (Table 1).

Table 1. General percentages of various pottery groups based on rim EVE.

Table 2. Percentages of various groups within fine and fine painted pottery.

Table 3. Percentages of various decoration schemes among fine open and closed pottery.

These frequencies may not be representative of the entire site during the LH IIIC Early period, but one needs to await further publications of relevant deposits to verify this.

DETAILED PRESENTATION OF POTTERYFootnote 8

Fine painted pottery

Open shapes

Painted open shapes represent almost 33 per cent of the entire assemblage, and slightly more than 70 per cent of the entire painted fraction (Table 2).

Deep bowls

Deep bowl is by far the most common open shape, as is typical for most of the LH IIIB/C Early pottery assemblages. If all cases where there is uncertainty whether a rim belongs to a deep bowl or another open form (like a cup or a stemmed bowl) are counted as deep bowls, its share amounts to 62 per cent.

As is fairly typical for Thessaly already in the deposits considered as LH IIIB2, the majority of deep bowls in the Kokotsika plot deposit have a monochrome interior. Nevertheless, examples with linear interiors are present, including a well-preserved deep bowl KP No. 2 (Fig. 4). The interior banding usually consists of a thin rimband and a second band below, which can be quite thick, as on KP No. 7 (Fig. 4).

The exterior banding on the rim may consist of a band of various thickness, from a thin one typical of Group A deep bowls (KP No. 2), to a medium-thick band (KP No. 1, Fig. 4) typical for a deep bowl of ‘Group C’ as differentiated by Elina Kardamaki (Reference Kardamaki, Schallin and Tournavitou2015, 84) for Tiryns. At least in one case there is no rimband at all (KP No. 10, but probably also KP No. 6, Fig. 4). All other examples have a banding typical of stemmed bowls, with additional band below a thin rimband.

On the lower body, the decorative zone is bordered by a single or a double band. There is usually a band at the base, slightly above its resting surface. Handles are invariably tri-splashed.

The usual profile is relatively straight with a gently flaring lipless rim; only in the case of KP No. 10 (Fig. 4) is the rim more sharply outturned, or even everted as on KP No. 4. At least one inventoried piece considered here as a deep bowl has a thickened lip (KP No. 1, Fig. 4). The reasons for ascription of these pieces to deep bowls are the following: 1) the extreme rarity of stemmed bowls already in the LH IIIB2 deposits in Thessaly; 2) the appearance of such a deep bowl type at the transition from LH IIIB2 to LH IIIC Early all over the Mainland (Mountjoy Reference Mountjoy1997, 111, figs 8–10); and 3) parallels for shape and decoration among better-preserved examples from Dimini with a ring base (Adrymi-Sismani Reference Adrymi-Sismani2014, 468, LH IIIB2).

Rim diameters of deep bowls in this deposit range from 14 to 20 cm, with a single smaller example (12 cm).

In terms of decorative motifs, the most popular one is the triglyph, usually filled with a zigzag or a wavy band. The panels made by the triglyph are often filled with antithetic spirals, and rims or sherds with parts of such spirals are quite frequent (KP Nos 4 and 8, Fig. 5). KP No. 4 is an example with the central triglyph filled with bivalves while the spirals have a cross-hatched decoration.Footnote 9 A single narrow central triglyph with compressed semi-circles is found on KP No. 2 (Fig. 4), which has a linear interior. Deep bowls decorated with such a motif are not attested at Dimini, but several examples are known from Pefkakia.Footnote 10 An unusual diagonal triglyph filled with a wavy band decorates deep bowl KP No. 3 (Fig. 5).Footnote 11 Narrow triglyphs are attested on deep bowls KP Nos 6 and 12 (Figs 45). In the case of KP No. 6 the side triglyph close to the handle is filled with zigzag, in KP No. 12 with a wavy band.

Dense spirals are also used in a running version (KP No. 1, Fig. 4),Footnote 12 which can have a solid centre (KP No. 13, Fig. 5). An uncatalogued rim sherd (Fig. 6a) is probably decorated with a stemmed version of this motif.

Two inventoried fragments are decorated with a floating zigzag (KP Nos 5 and 10, Figs 7 and 4),Footnote 13 and this is the only narrow pattern attested in this deposit.

Fig. 7. Decorated deep bowls. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

An unusual decoration on the deep bowl is a vertical whorl shell (KP No. 9, Fig. 7), reaching way below the handle attachment. Both the motif and the decorative zone extending towards the base are characteristics of early deep bowls. However, deep bowls decorated with vertical whorl-shells are known from LH IIIB2 levels at Dimini (BE 36002; Adrymi-Sismani Reference Adrymi-Sismani2014, 349). The example from the Kokotsika plot is of high quality and has a monochrome interior.

At least one specimen appears to belong to a linear deep bowl (KP No. 14, Fig. 7), although its fragmentary preservation does not exclude the possibility of it bearing a sparse decoration, like a central narrow triglyph (cf. KP No. 2, Fig. 4). KP No. 15 (Fig. 7), restored as another linear deep bowl on the drawing, preserves only the handle part and most likely bore patterned decoration. A ring base with part of a lower wall (KP No. 16, Fig. 7) featuring monochrome interior and a single band at the base on the exterior also belongs to a deep bowl. Among the uncatalogued material, there are fragments of two other mendable deep bowls preserving a ring base and fragments of linear lower walls.

No examples of monochrome deep bowls have been identified. Such deep bowls are virtually unknown in the LH IIIC Early materials from Thessaly.Footnote 14

Among the uncatalogued sherd material, there are two rim fragments that most likely belong to deep bowl rims (rather than stemmed bowls) that are decorated with a thick wavy band (Fig. 6bc), a type quite widespread on the Mainland at the LH IIIB2/C Early transition (Vitale Reference Vitale2006) and common in Thessaly.Footnote 15 One of the rims is thickened, the other everted in a typical manner for deep bowls decorated in this manner found at Dimini or Pefkakia. Both have monochrome interiors and a band at the rim.

Cups

There are two linear cup fragments, both with a gently flaring lip and a diameter of 10 cm. They have monochrome interiors, and a narrow (KP No. 18, Fig. 8) to medium-wide (KP No. 17, Fig. 8) band on the exterior. KP No. 18 preserves parts of both attachments to a vertical handle. It also has a slight carination at the height of the lower handle attachment. The profile of KP No. 18 is not unlike that of a kylix, but with this decoration it is a remote possibility. Both cups are very similar in terms of their fabric.

Fig. 8. Decorated cups, stemmed bowls and shallow bowl. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

While linear cups described above are already popular in the deposits assigned to LH IIIB2 in Dimini (Adrymi-Sismani Reference Adrymi-Sismani2014, 398, 432–3, 458, 473–4), a monochrome carinated cup (KP No. 19, Fig. 8) is a type not attested among Mycenaean pottery even in the re-occupation deposits at that site dated to LH IIIC Early.Footnote 16 In fact, in Rutter's scheme of the relative chronology of that period, this is a marker of phase 2 (Rutter Reference Rutter and Davies1977), i.e. not of the earliest LH IIIC. KP No. 19 preserves rim and sharp carination, while a large rim diameter (18 cm) leaves little room for doubts regarding the shape, as an angular kylix would have a much smaller diameter.

Stemmed bowls

Some of the fragments classified as deep bowls feature rims that could be also considered as stemmed bowls, but KP No. 11 (Fig. 8) has several features that suggest it may be the only positively identifiable stemmed bowl in this deposit.Footnote 17 The walls are splaying, terminating in an everted rim, and the lowest preserved part is so narrow that a ring base seems very unlikely. It has a monochrome interior, and a stemmed bowl rim banding on the rim's exterior. Only a small part of the decorative zone with a panel of vertical lines filled with horizontal wavy lines and flanked by half-rosettes is preserved, framed by two bands below the horizontal handle.

Another fragment that belongs to a stemmed bowl is a linear stem preserving part of a domed base and a small part of an unpainted interior (KP No. 29, Fig. 8). Its fabric suggests it is an import, possibly Argive, and a date in LH IIIB would be most likely. Nevertheless, the stem has been clearly reworked by breaking off the entire lower bowl, possibly to convert it into a stopper. No other fragments of bases that could be ascribed to stemmed bowls were identified in this deposit.

Shallow bowl

KP No. 21 (Fig. 8) is a relatively large (rim diameter of 20 cm) linear bowl with thickened and flat-topped rim and horizontal handles attached just below it. It has monochrome interior and rim top, two narrow bands enclosed by wider ones below the handles, and another narrow band below.Footnote 18 It is distinguished by a highly micaceous fabric.

Basins

In terms of decoration, two variants are attested in this deposit – with a monochrome (KP No. 26, Fig. 9) and a linear interior (KP No. 27, Fig. 9). KP No. 26 preserves a protruding, flat-topped rim and parts of a horizontal handle with flattened oval section. The rim's upper surface is solidly painted, and there is a band just below the rim, continuing on the handle. The rim diameter is substantial (30 cm).

Fig. 9. Decorated basins, kylix and kylix/bowl/dipper. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

KP No. 27 is a very low broad ring base, 13 cm in diameter, with a single preserved band on both interior and exterior.Footnote 19

Among the uncatalogued material there is an example of a basin with a slightly thickened rim, painted on top, with otherwise no decoration on the body and only a band along the horizontal handle (Fig. 6d).

Kylix

There is one certain and another possible fragment that belongs to a decorated kylix. While the only decorated kylikes common on the Mainland during LH IIIC Early are of the conical type, and are usually linear, a survival of a standard rounded decorated kylix FS 258 beyond the LH IIIB1 period seems to be typical of Thessalian assemblages.Footnote 20 Such kylikes are present in the LH IIIB2 destruction layers in Dimini, as well as in the re-occupation phase dated to early LH IIIC (Adrymi-Sismani Reference Adrymi-Sismani2014, 531–3). They are, however, very rare in similarly dated deposits at Pefkakia.

In the Kokotsika plot deposit, there is one fragment of such a kylix (KP No. 22, Fig. 9), preserving part of the body decorated with a palm motif, and exhibiting a monochrome interior.Footnote 21 It is of very high quality, very similar in this respect to the deep bowl KP No. 1.

An enigmatic linear vessel (KP No. 20, Fig. 9) features a narrow lower body that appears to be coming down to a stem, a small diameter, as well as purely linear decoration, thus unlikely to qualify for a stemmed bowl. Therefore it is considered here as a possible kylix, but it could be a cup/bowlFootnote 22 or even a large dipper.Footnote 23 It is unusual in many respects. It has a vertical upper profile, unfortunately without a preserved rim. There are thin grooves on the uppermost preserved wall, perhaps near to the rim. It has an irregularly spaced banding on the exterior with three bands at mid body, and a thicker band at the lowest preserved body, which could have even been solidly painted. The interior is monochrome, and the walls are relatively thick. There is use-wear in form of vertical scratches on mid body, which is normally not seen on kylixes (see the discussion below).

Mug

A single linear rim (not inventoried) appears to come from a mug (Fig. 6e). It has a rimband, and a single band on lower preserved exterior.

Kraters

Kraters represent a very small part of the deposit according to rim EVEs (below 1%), but there are three inventoried examples with different decorative schemes, each consisting of more than a single piece.

KP No. 23 (Fig. 10) preserves a handle and body fragments belonging to a substantial, high-quality and hard-fired krater, partially burnt. The decoration consists of a tricurved arch, with additional fill of two slightly curved horizontal bands and a solid triangle. The decorative zone is framed by bands. The interior is monochrome, and the paint has a metallic sheen. The partially preserved handle is obliquely pierced.Footnote 24

Fig. 10. Decorated kraters. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Another krater (KP No. 24, Fig. 10) preserves only body fragments, but exhibits a linear interior. The exterior is decorated with two stemmed spirals, perhaps radiating from the same point.Footnote 25

The third krater (KP No. 25, Fig. 10) preserves a small part of an incurving rim capped by a thickened and sloping lip. Rim and interior are monochrome. One of the body sherds preserves a slight thickening, most likely to a horizontal handle. It appears to be decorated with curvilinear patterns, painted with either three equal thin bands or in a thin-thick-thin banding system.Footnote 26 One of the sherds preserves also a different, partially preserved motif consisting of a loop and additional bands.

Kalathos

A single base fragment with linear exterior decoration, including the underside, and unpainted interior, could belong to a kalathos (Fig. 6f).

Closed shapes

Closed shapes represent the minority of the fine painted fraction, with a share of 29 per cent (Table 2). Most prominent among them are the monochrome examples (Table 3).

Jug/amphora/hydria

Painted closed shapes of medium size in this deposit are limited, with a single exception, to vessels either solidly painted or with a monochrome, dark reddish-brown wash that appears to constitute a thinner layer that does not cover completely the underlying surface. While their fragments are quite common in the sherd material, it was only possible to identify joining fragments belonging to two bases that were mended.

KP No. 37 (Fig. 11) is a flat raised base with part of the lower body solidly painted including originally the entire base underside, now preserving only patches of paint. Due to its intense use, the edges and underside of the base are heavily worn, as is also part of the upper preserved body (see below for a discussion of use-wear patterns in this deposit).

Fig. 11. Decorated jars and stirrup jars. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

KP No. 36 (Fig. 11) is a simple base, only slightly convex, with a dark reddish-brown paint. The base is worn at its edges, with more intense wear at c. 20 per cent of the base circumference, extending onto the wall.

A number of rims (Fig. 12) belong to such closed shapes, most probably either jugs or amphoras, less likely hydrias, as there is limited evidence for horizontal handles. The rims are most often of squared profile, and when more rounded profile is encountered, it usually has a gentle carination in the front part of the rim. There are rare examples of simple flaring rims, and one with a thickened and down-sloping lip. Hollowing on the interior is very rare. Vertical handles belonging to these shapes, attached to the rim, feature oval sections.

Fig. 12. Photographs of non-inventoried monochrome painted/washed closed shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

At Dimini, monochrome painted or washed closed shapes seem non-existent. On the contrary, such vessels appear to be a standard constituent of ceramic assemblages at Pefkakia during LH IIIB2–IIIC Early period, and most likely also earlier. We might be dealing here therefore with some micro-regional differences in pottery consumption practices.

Stirrup jars

Two stirrup jars were mended from several fragments. For one of them, KP No. 31 (Fig. 11), it was possible to generate a composite drawing, from the base to the lower shoulder. It has a globular shape and a raised hollowed base. It is decorated with two fine line groups enclosed by bands on both sides, and traces of most likely enclosed zigzag on the uppermost preserved body. The underside preserves four concentric circles. The fabric, and the quality of manufacture, suggest it is an import, most likely from the Argolid.Footnote 27

The other stirrup jar, KP No. 30 (Fig. 11), preserves part of a shoulder with the beginning of a vertical handle and the lowermost stump of a most likely hollowed false neck,Footnote 28 both solidly painted. Decoration consists of a fringed flower with an internally dotted stem,Footnote 29 and a fine line group below. Lower on the body there is a double thin line, a typical linear feature put on the bodies of the stirrup jars. The flat course of the shoulder combined with a gentle transition to the body suggests this might be an example of either FS 167, the conical-piriform type, or FS 182, the conical type.

Feeding bottle

A single basket-handle with a ladder pattern preserving a very small part of the rim (KP No. 34, Fig. 13) confirms the presence of a feeding bottle in this deposit. The fragment appears to be burnt.

Fig. 13. Various decorated closed shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Alabastra

The deposit from the Kokotsika plot includes non-joining fragments of what are probably two distinct rounded alabastra (KP Nos 32a and 32b, Fig. 13). One of them is a base mended from several sherds and decorated with multiple circles of varying thickness. The other is a single handle and body fragment from a rounded alabastron decorated with a rock pattern. The body profile is quite steep, indicating a higher version of the form with parallels in Dimini and Pefkakia (Adrymi-Sismani Reference Adrymi-Sismani2014, 544, LH IIIC Early; Batziou-Efstathiou Reference Batziou-Efstathiou, Weilhartner and Ruppenstein2015, 60, fig. 20).

A single uncatalogued base sherd (Fig. 14a) belongs to a straight-sided alabastron. The preserved decoration is linear on the lower body, with spaced concentric circles on the underside of the base.

Fig. 14. Photographs of non-inventoried decorated closed shapes and unpainted open shapes mentioned in the text. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Miscellaneous closed shapes

A single neck and shoulder fragment from a closed shape was inventoried as KP No. 35 (Fig. 13), as it preserves patterned decoration. There is a slightly irregular horizontal (rather than a wavy) band at the neck, a band at neck-shoulder transition, and two dots and an additional element (vertical stripe) next to them. This is the only example of a patterned closed shape except for the two stirrup jars.

Four non-joining shoulder fragments (KP No. 32c, Fig. 13) attest to the presence of a small monochrome closed shape, probably a roughly globular juglet similar to several examples attested at Pefkakia in the latest occupation levels.

A small fragment of upper body mended from five fragments (KP No. 33, Fig. 13) belongs to a closed shape with linear decoration, possibly imported. The banding consists of two thin bands enclosed between two thicker ones. The paint has a high lustre, and the surface is polished, a treatment not attested among the other Mycenaean pottery from the deposit.

An enigmatic squared slightly irregular rim fragment (with a diameter of 5.5–6.0 cm, Fig. 14b), in a very dark reddish-brown fabric and covered with a wash of a very similar colour, may belong to a spout of a large transport stirrup jar. The fabric containing calcareous and quartz inclusions is not unlike that of vessels considered to be of local manufacture (see below), but its colour and hard firing stands out.Footnote 30 Alternatively, this fragment could belong to an askos.

A single flaring rim (Fig. 14c) belongs to a small closed shape, either an amphoriskos or an alabastron, and has a band at the rim in and out. Its fabric does not correspond to local pottery. A shoulder body sherd with a beginning of a flaring monochrome neck should belong to another such shape. On the body it is decorated with an enclosed fine line group (Fig. 14d).

Another rim (Fig. 14e) could attest to the existence of a collar-necked jar, a shape that gains popularity on the Greek mainland from the beginning of the LH IIIC period onward (Mountjoy Reference Mountjoy1986, 134). It is a slightly flaring flattened rim, with a painted top, a band below on the exterior, and an unpainted interior.

Single body sherd from a closed shape, perhaps a collar-necked jar, is the only example of pictorial decoration in this deposit (Fig. 14f). It shows a fish attacking another animal.

Fine unpainted pottery

As mentioned above, such pottery is outnumbered by the painted fraction, since it represents less than 40 per cent of the entire fine fraction (Table 2). Again, open shapes have a much higher frequency than closed unpainted vessels (77.7 vs 22.3%, Table 2). Nevertheless, even among the open shapes the number of mendable vessels was small. The difficulty of finding joining pieces (especially body sherds) among unpainted sherds was definitely an important factor here.

Open shapes

There are several different types of open vessels attested in this deposit, but only a few are preserved with more than a single fragment.

Cup

A shallow cup with a slightly carinated profile, KP No. 38 (Fig. 15), is the most completely preserved vessel in the entire deposit, but is still missing more than 50 per cent of its body. It has a flat, only slightly raised and string-cut base, rounded carination and a flaring lipless rim. The vertical handle has an oval section

Fig. 15. Unpainted open shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Kylikes

Two mended fragments, KP Nos 41 and 42 (Fig. 15), preserve most likely lower bodies of kylikes. Their profiles are conical, but nothing can be said about the upper bowl and rim. Both are made of a pale yellowish fine fabric.

Several kylix rims preserved as single fragments have earlier profiles, suggesting an LH IIIA2–B1 date.

Interestingly, there is not a single fragment that could be confidently ascribed to a conical kylix, a popular type at both Pefkakia (Batziou-Efstathiou Reference Batziou-Efstathiou, Weilhartner and Ruppenstein2015, 67, fig. 44) and Dimini (Adrymi-Sismani Reference Adrymi-Sismani2014, 549), as well as in Theocharis’ excavations at Kastro/Palaia (Theocharis Reference Theocharis1956b, 126, fig. 43β).

Kraters

Unpainted kraters are attested only in sherd material. Several rim types are present. A fragment with a distinct pale slip over a dark red clay body preserves an everted rim with a tapering lip (Fig. 14g). This could belong to a stemmed krater of a type attested in Dimini both in LH IIIB2 and LH IIIC Early levels (Adrymi-Sismani Reference Adrymi-Sismani2014, 370–1, 555–6, nos BE 35819 and 35637). Another similar rim preserves the stump of a vertical strap handle.

Ring-based kraters are attested by two squared rims (Fig. 14h), one of them exhibiting a convex upper surface. There is also a thickened rim with a convex top, slightly undercut, and another protruding rim with a convex top in a medium-fine fabric (Fig. 14i).

Basin

Just as was true of kraters, unpainted basins are attested only in sherd material. Again, there is quite a variety in rim types, including a thickened and protruding rim, and a protruding flat-topped rim with pale slip, preserving the stump of a horizontal handle. There is also a thickened down-sloping rim to a shallow example of this shape.

Mug

The presence of an unpainted mug is attested by several pieces from rim to base of a small example (KP No. 43, Fig. 15).Footnote 31 The base is slightly convex, and the rim is flaring, exhibiting traces of use-wear (see below). The handle is not preserved.

Deep bowl

Relatively deep body and a flaring lipless rim of KP No. 40 (Fig. 15) most likely belongs to an unpainted deep bowl. In the sherd material, there is also a complete horizontal handle possibly to another unpainted deep bowl. Such deep bowls are generally rare, but seem to be more common in early LH IIIC layers at other sites such as Iria in the Argolid (Döhl Reference Döhl and Jantzen1973, 170–1, nos A6, A9, A11, A12, pls 69–70).

Dipper

An uncatalogued thick-walled rim with a high-swung handle must belong to a relatively large dipper (Fig. 14j). Among the unpainted rims there might be others that belong to that shape.

Shallow angular bowl

A single mended fragment (KP No. 39, Fig. 15) belongs most likely to a shallow angular bowl. It preserves a slightly hollowed base and parts of the lower bowl, and is very well made. Interestingly, among the sherd material there is only one rim with a carinated profile, more likely part of a kylix, and not a single example of a rim with a horizontal handle that would unequivocally attest to the presence of this vessel type in the deposit.

Closed shapes

The only closed shape preserving a significant portion of its profile is a medium-sized jar with a sharply flaring rim (KP No. 44, 17 cm in diameter; Fig. 15). Based on the profile, and slight wear at the rim, it could be identified as a dipper jug. This shape is best known from Lefkandi (see Evely Reference Evely2006, 19, 52, figs. 2:5.2, 2:8.2, nos 66/P183 and 66/P308), but has been also attested in Pefkakia.

Uncatalogued rims include a squared, triangular rim, slightly undercut with a thickening indicating the presence of a vertical handle, another rim with a rounded profile, and two non-joining fragments preserving a tall, slightly flaring neck ending in a flattened rim that is only slightly thickened

Grey Ware

Grey Ware is a rare category in this deposit (1.4% of the total pottery, Table 1), but one of significant importance for the stratum's overall interpretation due to its association with Handmade Burnished Ware (see the discussion below). It appears to consists of two shapes only – a carinated cup and a closed shape. The fabric is grey in colour, sometimes exhibiting a thin core that can be slightly lighter or darker than the rest of the fracture. Surfaces are burnished, sometimes reaching a stage of polishing when single burnishing troughs are no longer discernible. The undersides of the bases also receive this labour-intensive surface treatment. There are clear wheelmarks on most of the inventoried fragments. All examples of open shapes in Grey Ware are preserved as single sherds.

Carinated cup

The shape, as can be reconstructed from single fragments, has a flaring tapering lipless rim (KP No. 51, Fig. 16), relatively sharp carination (KP Nos 46, 47, 50, Fig. 16), and slightly convex lower body coming down to a ring base, that can be quite low (KP No. 52, Fig. 16) or more standard in profile (KP No. 49, Fig. 16). It is equipped with a vertical, probably high-swung strap handle (KP No. 48, Fig. 16). The inventoried handle significantly changes its course right above the attachment. Examples from Kastro/Palaia seem to belong to large cups, as rim KP No. 51 has a diameter of 21 cm and the diameter at the exterior carination of KP No. 47 is 19 cm.

Fig. 16. Grey Ware. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

At Dimini, carinated cups in Grey Ware come in two sizes.Footnote 32 Small cups have a diameter around 10 cm; large ones are twice as big (Adrymi-Sismani Reference Adrymi-Sismani2014, 559). They are characterised by ring bases, sharp carinations similar to that of KP No. 47, and flaring rims. The handles of large specimens are strap in section, although not as wide and thin as KP No. 48 (Adrymi-Sismani Reference Adrymi-Sismani2014, 559–60). Cups from Dimini for which parallels from Broglio di Trebisacce and Torre Mordillo have been quoted (Jung Reference Jung2006, 49–51) seem to closely match those from Kastro/Palaia.

Closed shape

A single closed shape in Grey Ware is represented by two joining raised and flat base fragments (KP No. 45, Fig. 16) belonging to a medium-sized wheelmade jar (base diameter 9.2 cm).

Closed shapes are a rare addition to the repertoire of Grey Ware pottery. From Dimini, only one closed shape has been published – a belly-handled amphora BE 35826 (Adrymi-Sismani Reference Adrymi-Sismani2014, 561), unfortunately without a preserved base.

Cooking pottery

Cooking pottery represents a surprisingly small part of the entire assemblage (less than 8%, Table 1). Nevertheless, its composition is highly interesting. Mendable cooking pots belong to a distinct class of Aeginetan-tradition cooking pottery. This class, thoroughly discussed elsewhere (Lis et al. Reference Lis, Kiriatzi, Rückl and Batziou2020), was most likely manufactured by potters representing a tradition developed on the island of Aegina that spread around 1200 BC towards the north, reaching as far as the Pagasetic Gulf. Nevertheless, according to the petrographic analysis only one of the cooking pots from this deposit appears to be local to the general area. Wheelmade cooking pottery that can be termed ‘Mycenaean’ is attested only with single sherds.

Aeginetan-tradition, handmade

The single best-preserved Aeginetan-tradition cooking pot (KP No. 53, Fig. 17) is a tripod, probably two-handled, with a short everted rim. Three other inventoried fragments preserve only everted rims (KP Nos 54, 56–57, Fig. 17), and it is uncertain if they represent other tripods or could possibly belong to flat-based jars. However, no flat bases have been identified in this group.Footnote 33

Fig. 17. Cooking pottery and pithos. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Wheelmade Mycenaean

Flat-based jars, in turn, are attested among the few fragments of wheelmade cooking pottery. The bases are raised and flat (KP No. 58, Fig. 17). Rims are very different from the Aeginetan-tradition cooking pots, as they are everted but very long, either slightly tapering (KP No. 62, Fig. 17) or flattened (KP No. 61, Fig. 17). Interestingly, KP No. 62 is similar to Aeginetan cooking pottery of the Early Mycenaean period. Being a single sherd, it could be an earlier kick-up.

Pithoi

The only significantly preserved example of a large storage container is KP No. 87 (Fig. 17), comprising four rim fragments joining into a substantial part of the circumference.Footnote 34 Interestingly, some, but not all, of these fragments are clearly burnt. The rim has a distinctive profile, protruding on both interior and exterior and featuring a flat top. Surfaces are wiped, but not very regularly. There is a shallow irregular groove just under the rim on the exterior. The vessel is handmade.

An uncatalogued protruding and flat-topped rim belongs to a larger closed shape, perhaps another pithos.

Handmade Burnished Ware

There are two reasons for which we are confident identifying this handmade pottery as Handmade Burnished Ware of Italian type. First, there are specific shapes, like the carinated cup, for which exact typological equivalents can be found only among the Late Bronze Age sites of the Italian peninsula. Secondly, preliminary petrographic analysisFootnote 35 of a selection of HBW pottery from this deposit indicates frequent use of grog, i.e. crashed pottery, in paste preparation process, a feature very characteristic for impasto pottery in Italy (Levi Reference Levi1999; Cannavò and Levi Reference Cannavò and Levi2018; Levi, Cannavò and Brunelli Reference Levi, Cannavò and Brunelli2019) as well as for some of the Handmade Burnished Ware found in the Aegean (Whitbread Reference Whitbread and Motyka Sanders1992; D'Agata, Boileau and De Angelis Reference D'Agata, Boileau and De Angelis2012) and beyond (Boileau et al. Reference Boileau, Badre, Capet, Jung and Mommsen2010; Pilides and Boileau Reference Pilides, Boileau, Karageorghis and Kouka2011).

There are a few observations that can be made here that regard other aspects of technology. Irrespective of the colour of the surface, which varies from light brown to black, the breaks are invariably very dark to black, indicating most likely a short firing process that did not allow for a complete oxidation of the organic matter contained in the clay. Most, but not all, fragments of HBW have burnished surfaces. The quality of burnishing varies, from cursory to extremely careful, providing an almost decorative effect on the neck of a closed shape KP No. 83 with vertical burnishing strokes. An interesting detail of the burnishing process was revealed after a close-up inspection of the marks. In the majority of cases, and irrespective of the quality of the final effect, burnishing troughs have an interior texture consisting of very fine parallel striations. This would indicate that the surface was treated not with a smooth object, like a rounded pebble or piece of bone, as is usually assumed, but with an object that had some sort of texture.Footnote 36 In terms of decoration, a few shapes exhibit impressed decoration.

From an overview of the existing literature, one may get the impression that HBW is made of coarse fabrics. However, close inspection of fabrics in this deposit, combined with petrographic examination, reveals that while some of the pieces exhibit a high density of inclusions, these inclusions rarely exceed 2 mm in their maximum dimension. Therefore, they should more accurately be classified as medium-coarse, even in the case of the most thick-walled fragments. In comparison with Mycenaean cooking pottery, the fired fabrics of most HBW pieces are in fact less coarse.

In terms of vase-building technique, material from the Kokotsika plot does not reveal much beyond the mere fact that these pieces are handmade. There is only a slight indication of coil joins in few of the studied fragments. Interestingly, a cup with a vertical rim handle (KP No. 68) appears to have a lower handle attachment plugged through the wall.

According to the statistics based on rim EVEs, HBW constitutes an extraordinarily high percentage of the entire deposit, amounting to 14 per cent (Table 1). The assemblage is dominated by closed shapes, in a reversed proportion to that attested for the Mycenaean pottery.

Carinated open shapes

The carinated cup (or bowl) is probably the most distinct type of Handmade Burnished Ware pottery. Its presence in the Kokotsika plot deposit is attested by several fragments, but the type does not seem to be very frequent. The clearest example is KP No. 64 (Fig. 18) preserving a sharp carination at the junction of the lower and upper wall, the latter with a very straight, almost vertical course, flaring out only close to the rim.Footnote 37 It exhibits high quality burnishing with vertical strokes.

Fig. 18. Handmade Burnished Ware – various open shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Handle and body fragments, initially inventoried together as KP No. 63 based on the presence of decoration, turned out to belong to two different vessels following a detailed macroscopic fabric analysis. Body fragment KP No. 63b (Fig. 18) belongs to a cup with a rounded transition between upper and lower wall and preserves a scar to a probably vertical handle. Upper wall and the rounded transition are decorated with impressed oblique lines arranged most likely in opposing groups.Footnote 38 Burnishing is of particularly high quality on the exterior.

Fragment KP No. 63a (Fig. 18) belongs most likely to a complex handle with a horned apex. Preserved is part of a single horn sharply turning upwards and ending with a flattened, slightly convex top. It is decorated on one side only with impressed curved lines, forming some sort of a festoon pattern.Footnote 39

Other cups and bowls

Rim and handle fragment KP No. 65 (Fig. 18) derives from a large cup/bowl with a composite vertical handle of strap type that has a standard loop part attached to the rim and a vertical protrusion raising above the rim. Based on Italian parallels, there are numerous variants of how this part above the rim could be shaped (Damiani Reference Damiani2010, 272–369). The rim is entirely covered by the handle, and a possible carination is not preserved, hence this fragment is not discussed under carinated open shapes. This piece is distinguished by a grey surface, but neither the coarser fabric nor wall thickness nor lack of wheel traces allows it to be classified as Grey Ware. It features high quality burnishing, vertical along the handle and horizontal on the interior of the bowl.

KP No. 66 (Fig. 18) is a small flaring rim fragment to a cup, and is relatively thin-walled. It has horizontal burnishing of good quality.

Rim and handle fragment KP No. 84 (Fig. 18) belong probably to a cup with a high handle of strap type. The upper wall is almost vertical and ends in a simple rim. There is a protrusion on the lowest preserved exterior part of the sherd that could mark the lower handle attachment. Burnishing is traceable only on parts of the sherd, but this might be due to surface wear.

A very different type of an open shape is represented by KP No. 68 (Fig. 18). It is a cup with a complete vertical handle of almost circular section.Footnote 40 The handle's lower attachment is plugged through the wall, which is visible only in the break, but not on the interior surface. The precise profile of the rim is masked by the handle's attachment so that it is impossible to know if it was genuinely as simple as depicted in the drawing here. Likewise, it is uncertain whether there was an impressed plastic band at the height of the lower handle attachment. Finally, the stance of the wall could be more vertical than shown in the drawing. In that case, similarity to the cups of the type present at Lefkandi would be more obvious (Evely Reference Evely2006, 120, pl. 26:4, fig. 2:42; see also Jung Reference Jung2006, 200).

A bowl of substantial size (rim diameter 27 cm) with a flattened, slightly thickened rim is documented by two rim fragments (KP No. 74, Fig. 18). One of them preserves a triangular protrusion on the rim top.Footnote 41 The stance of the other fragment is uncertain, and if both belong to the same vessel, the lower wall must be more incurving. Good quality horizontal burnishing is preserved on all surfaces.

Large bowls

The largest of the HBW vessels from the Kokotsika plot deposit is a bowl, KP No. 67 (Fig. 19), with tapering body, slightly convex walls and a single preserved horizontal handle of an oval section situated at mid-body height. Its diameter can be estimated at c. 50 cm. It resembles somewhat BE 35997 from Dimini (Adrymi-Sismani Reference Adrymi-Sismani2014, 567), while a bowl with similar dimensions, yet with no handles, was found in Late Minoan IIIC levels at Chania (80-P 0235: Hallager and Hallager Reference Hallager and Hallager2000, 166, pls 51, 67d). Its walls are up to 1 cm thick. It shows mostly horizontal burnishing, both on exterior and interior.

Fig. 19. Handmade Burnished Ware – large bowl and closed shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Jars with incurving rims (and plastic band)

Such jars are probably the most common type of HBW vessel found on the Greek mainlandFootnote 42 and represent a common type of impasto pottery in Italy referred to as olla (Damiani Reference Damiani2010, 267–72, pls 89–92).

The best preserved HBW vessel in this deposit (KP No. 70, Fig. 19) belongs to this characteristic type. It is a jar with an incurving rim and plastic finger-impressed band just below the rim. Almost 40 per cent of the rim is preserved. There is a single tongue-shaped lug protruding from the plastic band. The rim is only slightly flattened on top. On the interior, just below the rim, there are traces of added clay that were not entirely obscured by subsequent burnishing. The quality of surface treatment is good, and it seems that in this case it was executed in various directions with overlapping troughs resulting in a higher lustre.

Another similar form is KP No. 73 (Fig. 19). In this case the rim is more obviously flattened and additionally decorated with oblique incisions made with a sharp tool. What is unusual is that the interior does not show any traces of burnishing, while the exterior has only very cursory burnishing. There are clear finger impressions on the interior just below the rim, perhaps from an upward movement while building the vase.

KP No. 80 (Fig. 19) displays an almost vertical upper wall, with a flattened rim. Below the rim there is an elongated tongue-shaped lug, on one end of which there seems to be an edge of a finger impression, suggesting that it is a part of a plastic band, just as the one attested for KP No. 70. On the part of the interior the flattening of rim forms a slight protrusion. There are traces of high quality burnishing, but most of the surface is worn.

Possibly from a similar jar, but with an uncertain stance, comes a wall fragment, KP No. 75 (Fig. 19), featuring an elongated horizontal lug with a central finger impression. Good horizontal burnishing is preserved on the exterior, covering even the finger impression; the interior is most likely worn and preserves only faint traces of a similar treatment.

KP No. 76 (Fig. 20) is another, but again slightly different jar of the same general type. The upper wall is straight in its course, as opposed to a more usual curved wall typical for this shape, and curves slightly in. It ends with a partially flattened rim. Quite low below the rim, at the edge of the preserved sherd, there is the beginning of a plastic band, which may have been plain. It would be the only example of a plain plastic band in this deposit. Levels above it, with the majority of pottery dating to LH IIIC Middle, yielded two further incurving jar rims with plain plastic bands (KP Nos 77 and 79, Fig. 20, both from the depth of 5.70–5.95).Footnote 43 The surface of KP No. 76 does not preserve any traces of burnishing, and it does not seem that this is due to surface wear. The irregular interior surface in particular does not seem to have received any final surface treatment. The course of the plain plastic bands on both examples deriving from a later context is slightly oblique, but since these are small fragments of the entire vessel it is uncertain whether this is just an irregularity or a conscious choice of a potter.

Fig. 20. Handmade Burnished Ware – various closed shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Other closed shapes

KP No. 83 (Fig. 20) is a single fragment preserving spreading neck ending with an everted rim. The flattened upper surface of the lip is decorated with groups of opposed diagonals, in a manner perhaps similar to the cup KP No. 63b.Footnote 44 There might be additional impressed dots between the diagonals, barely visible even in strongly raking light. In terms of manufacturing details, there is a slight overhang on the interior just below the rim which has not been obscured by later treatment. The burnishing is of excellent quality, approaching an almost decorative effect with vertical troughs on the exterior.

A similarly high quality of burnishing is present on KP No. 72 (Fig. 20), a very large jar with a simple flaring rim. Its surface is pale brown, but the core is very dark. Breaks preserve traces of coil joins, a rare feature for HBW from the Kokotsika plot.

A very large jar with a spreading neck and flattened but not everted rim is represented by KP No. 71 (Fig. 20). In general form it is similar to KP No. 83. It exhibits good quality burnishing, with troughs going in various directions on the exterior, being more regularly horizontal on the interior.

A much different closed shape with a vertical shoulder handle of round section is represented by KP No. 86 (Fig. 21). It has a globular shoulder turning into a neck, but only its beginning is preserved. The handle attachments are spaced very close to one another.Footnote 45 The walls are very thick, on average 1 cm. Burnishing is of a fairly good quality.

Fig. 21. Handmade Burnished Ware – various closed shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Another jar, KP No. 82 (Fig. 21), has a flaring slightly tapering rim and a vertical handle of oval section. Its overall form is reminiscent of Mycenaean cooking pots, a phenomenon attested among examples of HBW from other sites (Kilian Reference Kilian2007, 23, pls 17–18).

There is a simple flat base with straight, spreading lower walls, inventoried as KP No. 85 (Fig. 21). It could belong to one of the closed shapes described here, but it cannot be excluded that it derives from larger open shapes, like KP No. 67. KP No. 85 is among the coarsest examples of HBW from the Kokotsika plot deposit and preserves traces of a fairly regular horizontal burnishing on the interior, but only cursory vertical burnishing on the generally irregular exterior surface.

KP No. 78 (Fig. 21) is another flat base, but the wall is more curved, and it probably belongs to a smaller closed shape, possibly a jar with an incurving rim. It exhibits vertical burnishing on the exterior, and horizontal on the interior. The base's underside is, once again, burnished.

Use-wear

Several vessels from the discussed deposit display various types of use-wear. Perhaps the most distinct pattern manifests itself through abraded scratched surfaces. Parts of vessels that display this use-wear include rims, bases and the most protruding parts of the body. It is present on deep bowls (their rims and convex lower bellies) KP Nos 2 (Fig. 22a), 3, bowl/kylix/dipper KP No. 20, mug KP No. 43, and two monochrome closed shapes, KP Nos 36 and 37 (Fig. 22b). In the latter case, the use-wear is present on the base and lower body. It is particularly noticeable on KP No. 37 since due to the wear some of the paint was also removed, revealing patches of exposed clay body.

Fig. 22. Examples of use-wear on pottery from the Kokotsika plot. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

This type of use-wear is well known from other sites, particularly Lefkandi (Lis Reference Lis2013), and seems to be most common during the LH IIIC Early period, thus in line with the date proposed for the Kokotsika deposit. It has been associated with the use of various vessels for scooping out content from other, coarser containers. In the case of closed shapes that could have served as water jars, such use-wear might have developed during the drawing of water from a well.Footnote 46

Another type of use-wear found on several open shapes occurs on the interiors of their rims in the form of worn paint. It is present on deep bowls KP Nos 10 and 15 (Fig. 22c), stemmed bowl KP No. 11 (Fig. 22d) and bowl KP No. 21. This could derive from stirring or removing of the contents with a spoon, which leaned against the interior rim during this action.

Deep bowl KP No. 16 (Fig. 22e) displays wear at the centre of the interior. The source of such wear could be similar to that described immediately above.

A closed shape in Grey Ware KP No. 45 (Fig. 22f) features use-wear on the resting surface, which is readily visible due to abrasion of the burnished surface. This is probably a result of moving of the vessel around.Footnote 47

Fabrics

During the recording of the material, basic macroscopic fabric analysis was conducted. Its results are summarised below. It should be noted that it was not possible to assign every fragment to a particular fabric group.

In terms of fine pottery, the most common fabric type appears to be orange-brown (sometimes yellowish-orange) in colour, with calcareous and dark red/brown rounded inclusions present in varying density, occasionally with pieces of shell. There is no or very little mica visible. Pottery of this fabric is usually pale-slipped. Among examples made in this fabric are deep bowls KP Nos 2, 3, 5, 6, 7, 8, and 12,Footnote 48 and basins KP Nos 26 and 27. Krater KP No. 23, with a pinkish-brown fabric colour, could be considered as a finer variant of this fabric. Closed shapes, like KP Nos 35–37, feature a similar fabric but with the addition of quartz. The unpainted cup KP No. 38 seems to be manufactured in this fabric, even though it is of darker colour (dark red-brown).

This fabric is very common also at Pefkakia, throughout the LH III deposits, and with considerable likelihood it can be considered local to the area.

Perhaps a variant of the same fabric is characterised by yellowish-brown colour, a similar set of inclusions, but more consistent presence of mica on the surface. This fabric is characteristic for deep bowls KP Nos 1, 9, 10, 13, cups KP Nos 17–18, kylix/bowl KP No. 20, and krater KP No. 24. All of them are decorated with red paint. Among unpainted open shapes, this seems to be the prevalent fabric, represented by KP Nos 39–43.

Another characteristic but rare fabric is pale yellowish in colour (sometimes with a greenish hue), with very few visible inclusions, except for a few dark rounded ones. Deep bowl KP No. 15 and stirrup jar KP No. 30 were classified as its members.

Clearly distinct fabrics were noticed in the case of shallow bowl KP No. 21, with a highly micaceous fabric, stirrup jar KP No. 31 and alabastron KP No. 32b, characterised by a very fine yellowish fabric with pinkish hue. The latter two are considered imports from the Argolid.

Grey Ware pottery seems to have been made in a fabric featuring mostly calcareous inclusions, with a few dark rounded ones. The main difference between the fragments is the varying frequency of mica on the surface, ranging from none to quite frequent. Perhaps this reflects the basic distinction between the two main fabric groups described above. In that case, the fabric of Grey Ware could be considered as likely local.

In terms of coarser pottery, fabrics of cooking pottery were described elsewhere (Lis et al. Reference Lis, Kiriatzi, Rückl and Batziou2020), while the fabrics of Handmade Burnished Ware will be discussed together with the results of petrographic analysis in a forthcoming publication. The only inventoried pithos is made from a medium-coarse fabric with poorly sorted quartz, some dark rounded inclusions, at least a single schist fragment and mica (mostly gold) on the surface.

SMALL FINDS

A variety of small finds came from the discussed level (see Table A2 for a catalogue). There was a single female figurine of Psi type, preserving a lower body and stem with splaying hollowed base (BE 6713, Fig. 23). It is decorated with lines on front and back upper body, a waistband, and four vertical lines along the stem. BE 6717 (Fig. 23) is an intact black steatite conulus with a conical body and thickened upper end. There were two bone pins, BE 6715 and BE 6712, both of round section (Fig. 23). The first one preserves the upper part with a small hole at the end, the other one includes only the lower part ending in a sharp edge. There is one rectangular piece (strip) of ivory (BE 6734, Fig. 23), with partially preserved rectangular projection at one end. The other short end is broken. It is slightly curved. Its front surface is smooth, originally polished, with only occasionally traces of short saw cuts along the edges. The underside is flat, smooth, with oblique tool marks. On the left edge (as shown on Fig. 23), the smooth surface ends with a sloping ridge. One peg-hole is preserved, with possible traces of a second one at the broken end of the rectangular projection. The thickness of the piece decreases towards the bottom edge.Footnote 49 In terms of glass objects, there was a single fragment of a glass bead BE 6719. A number of small bronze objects in the form of a pin, a ring, and a spindle-shaped object, mostly highly corroded, were also recovered (BE 6710, 6711, 6714, 6714).

Fig. 23. Small finds. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Finally, a rounded disk made from a krater body sherd should be discussed under small finds (Fig. 23). It has only a roughly circular shape, and on one of the sides it preserves two partially drilled holes. It seems that for some reason the reworking of this sherd has not been accomplished. The original vessel was a krater with monochrome interior, decorated with an elaborate panelled pattern on the exterior.

DATE OF THE DEPOSIT

The LH IIIC Early date of the assemblage from the depth of 6.05–6.15 appears to be confirmed by a number of features. The most significant fragment in this respect is the monochrome carinated cup KP No. 19. Jeremy Rutter (Reference Rutter and Davies1977) saw its appearance as a diagnostic of his phase 2. None of the types that would suggest a later date, such as linear conical kylikes (Rutter's phase 3) or reserved bands on deep bowls (LH IIIC Middle, Rutter's phase 4), are present in this level. On the other hand, there is a significant number of links with LH IIIB2 and LH IIIC Early deposits at Dimini, and also LH IIIB2–IIIC Early levels at Pefkakia, as demonstrated by provided parallels, whereas none of the above features monochrome carinated cups. Also, the fabrics of Aeginetan-tradition cooking pottery from the Kokotsika plot exhibit no connection with fabrics of such pottery from Pefkakia (Lis et al. Reference Lis, Kiriatzi, Rückl and Batziou2020, 306), perhaps another indication of a chronological difference. An almost complete absence of unpainted carinated kylikes in the discussed deposit could be another such difference, as they seem to be popular both at Dimini (Adrymi-Sismani Reference Adrymi-Sismani2014, 546–8) and Pefkakia (Batziou-Efstathiou Reference Batziou-Efstathiou, Weilhartner and Ruppenstein2015, 67, fig. 43). Therefore, we would like to suggest that the Kokotsika deposit post-dates the abandonment of Dimini, while it may not represent the latest phase of LH IIIC Early in Thessaly.

It is important to note that the distinct regionalism of Thessalian pottery manifests itself also in this particular deposit. Notable are the absence of monochrome and extreme rarity of linear deep bowls, both types being common during early stages of LH IIIC in other areas of Central Greece. There is definitely more to learn about the LH IIIC period in Thessaly from a ceramic perspective, and additional deposits should be studied and published from the area.

Finally, we would like to note that some of the fragments found in the deposit presented here could pre-date the bulk of the pottery belonging to LH IIIC Early. Among such possible earlier pieces we could highlight both stirrup jars KP Nos 30 and 31, the patterned kylix KP No. 22, or the deep bowl with vertical whorl-shell KP No. 9. With the exception of the imported stirrup jars, these fragments could also be considered as examples of conservatism in the local pottery tradition.

POTTERY FROM LAYERS ABOVE AND BELOW THE DEPOSIT, AND THE PIT

Layers above the deposit

A layer immediately above the deposit (from above 6.05 m) contains pottery that is best termed as LH IIIC Middle. Closed shapes are decorated with tassels or, in one case, an antithetic streamer. Such decorated closed shapes with linear painted rims are not attested in the main deposit. There are several examples of thick-walled and large kraters, some of which bear pictorial decoration. In contrast to the lower level, monochrome deep bowls are attested, and some of the rims exhibit a reserved band on the interior, normally a hallmark of LH IIIC Middle (and later) pottery (Rutter Reference Rutter and Davies1977, 3–4; Mountjoy Reference Mountjoy1986, 155, 178). There are also occasional reserved bands on some of the lower bodies of deep bowls, usually associated with a reserved interior band just below the rim. Levels higher up (from c. 5.50 m) contain pottery of a more advanced LH IIIC Middle, if not perhaps even LH IIIC Late, character. These include decorated trays, kraters with slashed plastic bands just below their rims, and more frequent reserved interior bands on monochrome deep bowls.

Refuse pit

The latest pottery in the pit clearly post-dates the pottery from the main deposit. It includes several pieces of a hydria decorated with an unusual tassel on the shoulder, comprising a double vertical element in the centre and sharply curving lateral bands, a very fine stirrup jar with hatched triangles, possibly of Achaian origin, a linear rim from a shallow angular bowl, two semiglobular cups with linear as opposed to monochrome interiors, and monochrome deep bowls. The date that can be suggested for this latest pottery is consistent with the date for the levels immediately above the deposit (LH IIIC Middle).

As the pit went through earlier strata, it also contains a lot of material that pre-dates its construction and use. It is perhaps interesting to note that earlier pottery found within the pit contains material attributable to the LH IIIA2–IIIB periods, absent from the layers below the deposit. These include typical LH IIIA2/B rims to open shapes, secure examples of unpainted shallow angular bowls, and a thickened rim to a monochrome kylix/stemmed bowl that fits well into the LH IIIA2/B1 period.

Layers below the deposit

As observed in the Introduction, it is quite striking that layers directly below the deposit contain pottery for which the latest date is LH IIIA2. There is nothing that could be assigned to the LH IIIB period, for instance Group A deep bowls. Very common are unpainted conical cups with string-cut bases. Such a form is quite typical for LH IIIA2 pottery found at Pefkakia,Footnote 50 but is most likely also present earlier. Some of the other unpainted open shapes have profiles that are most likely LH IIIA2, but there are numerous earlier ones, too. There are a few small fragments of decorated kylikes, but not very diagnostic as to their exact date. Worth mentioning is a cup with a flaring rim, monochrome interior and band at the rim on the exterior, similar to semiglobular cups of LH IIIB2 and IIIC Early deposits in Thessaly, but most likely belonging to a rare LH IIIA2 variety (Vitale Reference Vitale, Gauss, Lindblom, Smith and Wright2011, 333–4, figs 2:1, 3:10). There are also two rim fragments from imported Aeginetan cooking pots with short everted rims, entirely missing in the deposit above (as opposed to the Aeginetan-tradition cooking pots; see above). Such cooking pots start during the LH IIIA2 period (Lis Reference Lis and Mazarakis Ainian2012a, 1206).

At lower levels, from c. 6.50 m downward, material appears to be of LH II date.

THE SIGNIFICANCE OF HBW AND GREY WARE IN THE KOKOTSIKA PLOT DEPOSIT

Generally, the significance of the finds of Handmade Burnished Ware in numerous contexts on the Greek mainland, on Crete, and in the Near East lies in its association, accepted by the majority of scholars, with the presence of people originating from the Italian peninsula (see most recently Jung Reference Jung and Driessen2018; Lis Reference Lis, Caloi and Langohr2018a; Rutter Reference Rutter and Middleton2020). This is borne out not only by the typological links with impasto assemblages in Italy, as elaborated above also for the fragments from the Kokotsika plot, but most importantly by observations related to its production. In the majority of cases where HBW has been studied by way of petrographic analysis, it turns out both to be locally produced and to involve the addition of grog (Whitbread Reference Whitbread and Motyka Sanders1992; Boileau et al. Reference Boileau, Badre, Capet, Jung and Mommsen2010; D'Agata, Boileau and De Angelis Reference D'Agata, Boileau and De Angelis2012), a technological choice that is unattested among the local Late Bronze Age pottery in the studied areas. This points to the presence of people familiar with the technology of pottery production developed on the Italian peninsula. Nevertheless, it is important to point out the possible presence of a vessel (KP No. 86) that does not find exact parallels on the Italian peninsula, while typologically it feels at home in the areas north of Thessaly. This may be one of the few links with the north that is detectable in the advanced Late Bronze Age in coastal Thessaly. This is important in relation to a number of vessels without distinct typological features, for which no precise parallels could be offered. However, given that the vast majority of identified parallels derive from Italy, it can be assumed that such less distinct pottery is also most likely related to that area.

Turning our attention to the particular assemblage presented here, definitely the most striking aspect in terms of its HBW component is its sheer quantity and resulting frequency, which upon comparison with published data from the Greek mainland appears extraordinarily high. So far, there are only two published contexts with quantified data regarding handmade and burnished pottery that contained more than 1 per cent of such pottery, both excavated in the North-eastern Lower Town at Tiryns (Maran and Papadimitriou Reference Maran and Papadimitriou2006; Stockhammer Reference Stockhammer2008). The quantities of HBW in that area of the settlement display significant chronological and spatial fluctuations, and are highest in phases 1 and 3. In phase 1, HBW makes up 2.05 per cent of the entire assemblage, to reach as high as 9.85 per cent in phase 3, while being almost absent in the intermediate phase 2. Nevertheless, the extraordinary frequency in phase 3 is due to the use of HBW in the construction of sherd hearth 153/00 in Room 7/00. In fact, all HBW sherds came from this feature alone. Also, an unspecified number of HBW fragments (including catalogued no. 69) from phase 1 came from another sherd hearth 175/00 (Stockhammer Reference Stockhammer2008, 150–1, 203, 283–94). Interestingly, although the situation in the Kokotsika plot excavation is far from clear, it is possible that a sherd hearth with at least some HBW fragments was also present here. Two flat-lying fragments of HBW vessels are visible on top of a hearth's surface in Fig. 3 and can be recognised as KP Nos 70 and 86. The only difference is that no clay layer is reported to have existed above these sherds, and such a layer is typical of sherd hearths at Tiryns (Maran and Papadimitriou Reference Maran and Papadimitriou2016, 28, fig. 13), while a burnt clay layer is reported in the substructure of the Kokotsika plot hearth.

In comparison with the typical quantities of HBW pottery on the Greek mainland, we are dealing with more than a tenfold difference in the Kokotsika plot deposit. Even if other counting methods were employed, the results would not be significantly different, as the number of handmade and burnished body sherds was also high in the studied assemblage. In this respect it is regrettable that no quantified data exists for LH IIIC Early re-occupation contexts at Dimini, as the number of published, well-preserved HBW vessels is significant.Footnote 51 It is possible that the deposit from the Kokotsika plot is not entirely unique for the area of the Bay of Volos.

The quantity of HBW found in any given context is a result of several variables, the most important being the type of context and both the status and the number of people producing and using this type of pottery. Philipp Stockhammer (Reference Stockhammer2008, 283–94) was able to demonstrate for Tiryns how the amount of HBW fluctuates with a changing use and status of a particular space. He considered the use of HBW in the constructions of two sherd hearths highly significant, as this is a rare feature among such hearths at Tiryns, plausibly indicating that they were constructed and used by people closely associated with this type of pottery. Another feature of the material record that shows high correlation with such hearths and the general quantity of HBW is the high incidence of Mycenaean monochrome carinated cups in phase 1 at Tiryns. This might have been a preferred type of drinking vessel among the immigrant population, replacing their traditional carinated cups in impasto (see also Rutter Reference Rutter and Middleton2020). Finally, the frequency of HBW tends to be negatively correlated with the amounts of Mycenaean cooking pottery, suggesting not only that the former could fulfil a similar function, but also that it might actually have been preferred for cooking.

All these aspects that typify Tirynthian contexts likely used by immigrants are traceable also in the Kokotsika plot deposit. As discussed above, the amount of HBW is extraordinarily high and it was possibly used in the construction of a hearth. The percentage of Mycenaean cooking pottery is lower than average for typical Late Bronze Age contexts, and a single carinated cup is also attested. Perhaps the last point is the weakest correlation with Tiryns, but it has to be borne in mind that the Mycenaean carinated cup did not replace impasto cups immediately,Footnote 52 and that it may be the very first such cup known from the area of Thessaly. Furthermore, in contrast to Tiryns, it seems that wheelmade Grey Ware carinated cups were quite popular in the Kokotsika plot deposit. Therefore, even a single example of a Mycenaean FS 240 could be considered significant.

It thus appears legitimate to suggest that, similarly to contexts of phases 1 and 3 in the North-eastern Lower Town at Tiryns, immigrants with their roots in Italy inhabited this part of the Kastro/Palaia site. Due to the limited exposure and lack of comparable contexts at the site, it is difficult to comment on the status of these people. However, very high frequency of HBW allows us to suggest that they may have been not only more numerous than at other sites, but also that they, perhaps, might have enjoyed a different, higher status. Some of the finds, like the worked piece of ivory, may point in this direction too, while pieces of slag around the hearth may indicate performance of craft activities by these people.

The demographic make-up of such a population is impossible to reconstruct, but some thoughts may be offered. The formal restriction of the assemblage, with prevalence of closed shapes,Footnote 53 may suggest a limited scope of tasks performed with HBW vessels, focused mainly on food preparation and perhaps storage, and could potentially point to the limited role and presence of its users. However, at least two points should be considered here. First, the use of predominantly Mycenaean vessels does not exclude the foreign origin of their consumers. Quite the contrary, they might have chosen to use such vessels both due to simple convenience, as these might have been easily available, and also due to the desire to integrate into the new community and adopt some of the local practices and associated utensils. Furthermore, if one adds the Grey Ware vessels to the HBW component, then also vessels that may be related to more socially visible acts of consumption of food and drink are of non-Mycenaean type, and this could suggest that we are dealing here not with single individuals providing some household services (more likely in the cases of the usually low quantities of HBW found at most of the sites), but rather with groups, such as families, that enjoy a certain status and employ a mix of Mycenaean and Italian-derived pottery for their various needs. The same could be claimed for Dimini, especially if quantities of HBW or Grey Ware found at this site were similar to those registered at the Kokotsika plot.Footnote 54

In terms of the origins of HBW pottery, much of the earlier research on HBW assemblages was focused on discussing which of the broad neighbouring areas (such as the Balkans and Italian peninsula) provided a better match for the repertoire of shapes found on the Greek mainland. With a growing consensus that the typological links of much HBW is to be sought in Italy, and the steadily growing body of HBW pottery on the Greek mainland and further east, we may now be in a position to appreciate the internal diversity of HBW assemblages with reference to possible origins of particular pottery types defined more precisely than simply ‘Italy’. This is a fascinating perspective, as this may allow us to say something more about the arriving populations. However, one thing to bear in mind is the possibility that mixing of population groups from various regions within Italy, and their respective potting traditions, might have taken place prior to their arrival in the Gulf of Volos, and as a result we might be dealing with assemblages for which we will not be able to find a single origin area. This seems to be the case for the first attempt at tracing the origin of particular forms found at a single site, conducted by R. Jung (Reference Jung and Driessen2018, 286–8) for Tell Kazel. The parallels point to various areas, from the Lipari islands and Calabria on the south-western side of Italy, to Apulia on the other side of the peninsula.

Based on the parallels for HBW from the Kokotsika plot discussed above, it seems that the situation is quite similar to that of Tell Kazel. Cited parallels point to Lipari, Calabria, Apulia, but also to areas further north, in the basin of the River Po. In this respect, a very interesting aspect of the assemblage from the Kokotsika plot is the decoration attested on some of the fragments, taking the form of simple impressed designs: diagonals, curved and crescent lines. Such decoration, and accompanying vessel forms, are typical for the late phase of the Terramare culture that developed in the region of the Po Valley in northern Italy (Cardarelli Reference Cardarelli2009). Nevertheless, in a more advanced Recent Bronze Age (or Recent Bronze Age 2), the beginning of which in Aegean relative chronology overlaps with LH IIIC Early (Jung Reference Jung2006, 216, fig. 24), such decorative features and associated vessel forms are widespread and attested in almost every area south of the Terramare culture, though in varying quantities (Cardarelli Reference Cardarelli2009; Bettelli Reference Bettelli2009; Bettelli, Cardarelli and Damiani Reference Bettelli, Cardarelli, Damiani and Bernabò Brea2018).

The presence of Grey Ware adds to this complex picture. This pottery group combines elements of Aegean potting traditions as regards firing and shaping techniques, with local southern Italian form repertoire. Its initial appearance in southern Italy represents a clear case of technological transfer from the Aegean, the mechanisms of which are a debated topic (Jones et al. Reference Jones, Levi, Bettelli and Vagnetti2014; Lis Reference Lis and Driessen2018b). The important point here is that Grey Ware in Italy has a geographically confined distribution, as it is found predominantly in the southernmost areas of the peninsula, with good parallels for Grey Ware carinated cups from Thessaly found at Torre Mordillo and Broglio di Trebisacce (Calabria). However, these areas happen to display the least influences of the Terramare repertoire. Probably the only sites which have produced both of these elements are Roca and Coppa Nevigata in Apulia (Guglielmino Reference Guglielmino, Graziadio, Guglielmino, Lenuzza and Vitale2013, 183–6, figs 4–5), and it is perhaps not surprising that Roca demonstrates the strongest connection to the Aegean among the settlements on the Adriatic coast. Beyond Italy, Grey Ware of Italian type has been reported from Chania (Hallager and Hallager Reference Hallager and Hallager2000, 166–7), Tiryns (Belardelli and Bettelli Reference Belardelli, Bettelli, Galanaki, Thomas, Galanakis and Laffineur2007), Dimini (Adrymi-Sismani Reference Adrymi-Sismani and Mazarakis Ainian2006; Reference Adrymi-Sismani2014, 559–61) and Tell Kazel (Boileau et al. Reference Boileau, Badre, Capet, Jung and Mommsen2010; Jung Reference Jung, Maran and Stockhammer2012).

FINAL REMARKS

With this article, the LH IIIC Early deposit from the Kokotsika plot at Kastro/Palaia in Volos is the first systematically published deposit from that site. Its importance lies therefore not only in documenting an interesting slice of time in the history of Kastro/Palaia, but also in the fact that it provides a valuable reference – in terms of pottery characteristics and frequencies – for any future studies of materials from that site, such as those from the recent investigations there. This is all the more important as the extensive excavations at Kastro/Palaia by Theocharis were not accomplished with a detailed publication of pottery and other finds.

With reference to the findings made during this work, excavations at the Kokotsika plot might have revealed remains related to the structures exposed in nearby plots by Theocharis, and considered by him to be remains of a palace. The likely dating of the plaster floor in the LH IIIA period overlaps roughly with the date of Theocharis’ first palace, whereas any remains chronologically associated with the second palace are elusive.

In terms of regional significance, this deposit most likely documents a slightly later stage of LH IIIC Early than what is present at the abandonment deposits at Dimini (as well as Pefkakia). This might be of considerable significance for the reconstruction of regional history. It has been stressed in a number of publications that Kastro/Palaia outlived other settlements in the area, and that this was the site that attracted people that left other habitation places (Adrymi-Sismani Reference Adrymi-Sismani and Middleton2020, 30; Karouzou Reference Karouzou, Lemos and Kotsonas2020, 889). With a deposit that matches Dimini in its re-occupation phase pottery so closely, not only in terms of stylistic parallels but also particular components, yet with some elements pointing to a slightly later date, we may have the first more direct evidence to base such a hypothesis on a more secure basis.

SUPPLEMENTARY MATERIAL

Online Supplementary Material is available for this article here: https://doi.org/10.1017/S0068245422000077.

ACKNOWLEDGEMENTS

We would like to thank Dr Z. Malakasioti for her permission to study and publish the LH IIIC Early deposit that she excavated at the Kokotsika plot. We are grateful to J. Rutter for his comments on an earlier draft of this paper, and to the two anonymous reviewers for their suggestions that helped improve this paper. Our thanks are also due to M. Bettelli for his initial identification of some of the pottery fragments, and to A. Cardarelli for the sharing of several publications related to the Terramare culture. B. Lis acknowledges financial support from the National Science Centre (Poland), grant No. 2016/21/D/HS3/02696, and from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 753569 that funded his post-doctoral research at the British School at Athens during which his work on this material begun. All pottery drawings and the plan on Fig. 1 were done by Tina Ross, while all pottery photographs, unless otherwise noted, were taken by B. Lis. Sofia Papamargariti and Thanos Efthymiopoulos were responsible for drawings and photographs of the small finds.

Footnotes

1 The depths refer to the level of the ground prior to the start of excavation, which corresponds to c. 12 m above sea level.

2 BE numbers refer to the catalogue numbers of the Archaeological Museum of Volos.

3 No floor that would go with the hearth was noted by the excavator, yet the existence of a hearth and the fact that there are no pottery joins for fragments found at the depths of 6.05–6.15 with lower-lying strata strongly suggest that some sort of surface, perhaps not well trodden and hence indistinguishable in excavation, must have existed.

4 A single vessel from the deposit, stirrup jar KP No. 30, has a joining fragment that derives from this pit.

5 Abbreviated catalogue for KP Nos can be found in the online Supplementary Material.

6 For some examples of its use, see Hale Reference Hale2016; Kaza-Papageorgiou and Kardamaki Reference Kaza-Papageorgiou and Kardamaki2018.

7 Late Bronze Age deposits from Mitrou consistently show frequency of cooking pottery at the level of 15% or above (by sherd count); see Lis Reference Lis2012b, table 1.

8 An abbreviated catalogue is provided in the online Supplementary Material (Table A1). All pottery presented here derives exclusively from the deposit at the depth of 6.05 to 6.15, unless otherwise noted.

9 For profile, see Adrymi-Sismani Reference Adrymi-Sismani2014, 386, 468 (LH IIIB2); for elaborate antithetic spiral, see Adrymi-Sismani Reference Adrymi-Sismani2014, 508, 514 (LH IIIC Early).

10 BE 51114, unpublished; for a similar deep bowl with monochrome interior from the same context, see Batziou-Efstathiou Reference Batziou-Efstathiou, Weilhartner and Ruppenstein2015, 63, fig. 29.

11 For a vertical version of such a triglyph, see Adrymi-Sismani Reference Adrymi-Sismani2014, 508 (LH IIIC Early); for a diagonal triglyph, see Stockhammer Reference Stockhammer2008, pl. 19:379.

12 For a parallel from Dimini, see Adrymi-Sismani Reference Adrymi-Sismani2014, 430 (LH IIIB2).

13 Adrymi-Sismani Reference Adrymi-Sismani2014, 518 (LH IIIC Early); a very similar deep bowl comes from a level predating phase 1a at Lefkandi; Popham and Milburn Reference Popham and Milburn1971, pl. 50:1 (bottom right).

14 Examples cited as monochrome deep bowls from LH IIIC contexts at Dimini appear to derive from earlier monochrome shapes, such as kylikes or stemmed bowls (Adrymi-Sismani Reference Adrymi-Sismani2013, 249, pl. 78δ,γ).

15 Batziou-Efstathiou Reference Batziou-Efstathiou, Weilhartner and Ruppenstein2015, 63, figs 31–2; Adrymi-Sismani Reference Adrymi-Sismani2014, 388, LH IIIB2. Deep bowls from Pefkakia and Dimini are similar to a type described by P. Mountjoy (Reference Mountjoy1999, 541, fig. 196:202,203) as truncated stemmed bowls (FS 283) with identical decoration, dated to LH IIIA2.

16 Carinated cups at Dimini are only attested among Grey Ware and Handmade Burnished Ware. Painted sherds with carinated profiles appear to derive from angular kylikes FS 267 (Adrymi-Sismani Reference Adrymi-Sismani2014, 534).

17 Stemmed bowls are basically non-existent in levels assigned to LH IIIB2 or LH IIIC Early at Dimini. A rim fragment from House K could belong to a stemmed bowl (Adrymi-Sismani Reference Adrymi-Sismani2013, 221, fig. 68α, LH IIIB2); others are foot fragments that may be residual.

18 A roughly similar bowl, although with linear interior and slightly larger in size, comes from Dimini (Adrymi-Sismani Reference Adrymi-Sismani2014, 527, LH IIIC Early).

19 For a basin with a band at the base from Dimini, see Adrymi-Sismani Reference Adrymi-Sismani2014, 528 (LH IIIC Early).

20 For the presence of such kylikes at Kastanas and other sites in Macedonia, see Jung Reference Jung2002, 142–6.

21 For a parallel from Dimini with an identical motif, see Adrymi-Sismani Reference Adrymi-Sismani2014, 484 (LH IIIB2).

22 Somewhat similar is cup BE 35639 from an LH IIIC Early context in Megaron A at Dimini, yet with a very different base; see Adrymi-Sismani Reference Adrymi-Sismani2014, 529.

23 A roughly similar and unusual (undecorated) form of a bowl/dipper with a pointed base can be found in LH IIIC Early context at Dimini (BE 24688: Adrymi-Sismani Reference Adrymi-Sismani2014, 546). The use-wear pattern observed on the vessel from the Kokotsika plot is in line with the dipper function. We would like to thank J. Rutter for this suggestion.

24 Similar decoration is attested on a krater from Lefkandi, phase 1b (Evely Reference Evely2006, pl. 25:15).

25 Stemmed spirals are sometimes used to decorate kraters at Dimini (Adrymi-Sismani Reference Adrymi-Sismani2014, 460, 477, LH IIIB2), but there is no good parallel for this particular design. A more similar design can be found on a krater from North-eastern Lower Town in Tiryns, phase 2 (Stockhammer Reference Stockhammer2008, pl. 60:1261).

26 This type of banding is commonly used for various motifs at Lefkandi, especially streamers, in phase 2a dated to LH IIIC Middle (Evely Reference Evely2006, 60, pl. 39:8, fig. 2.22:5, 202). However, the type of thickened down-sloping rim seems to be characteristic of kraters from Phases 1a and 1b (personal examination by B. Lis), and is common among LH IIIB2 kraters from Dimini (Adrymi-Sismani Reference Adrymi-Sismani2013, pl. 64δ,γ). A mug found in an LH IIIB2/IIIC Early context at Pefkakia features decoration executed with similar banding (Batziou-Efstathiou Reference Batziou-Efstathiou, Weilhartner and Ruppenstein2015, 61, fig. 24).

27 The presence of concentric circles on the underside of a hollowed base as well as the possible enclosed zigzag on the upper body have parallels among LH IIIB2 examples from the Argolid (Wardle Reference Wardle1973, 309, fig. 7).

28 The relatively wide opening at the base of the false neck suggests it was most likely hollowed, and that the preserved solidly painted part is a ridge around the false neck, as for example on a stirrup jar from Athens (Mountjoy Reference Mountjoy1999, 548, fig. 198, no. 227) that also provides a good parallel for shoulder decoration. One body sherd belonging to KP No. 30 derives from a later pit, and was found at the depth of 6.27–6.35.

29 Similar version of a flower motif is found on two stirrup jars dated to LH IIIB1 from Athens and Aegina (Mountjoy Reference Mountjoy1999, 548, figs 198–9, nos 227, 232), as well as Tanagra (Mountjoy Reference Mountjoy1999, 675, fig. 257, no. 131) and Rhodes dated to LH IIIB (Mountjoy Reference Mountjoy1999, 1019, fig. 415, no. 93).

30 According to J. Rutter (pers. comm.), this fragment is very similar to a group of pottery from LH IIIC levels at Aigeira, which is predominantly handmade, and in its repertoire includes transport stirrup jars. For an illustration of this group, see Gauss et al. Reference Gauss, Smetana, Rutter, Regner, Rusch, Stümpel, Rabbel, Ruppenstein, Heiden, Leibetseder, Tanner and Hinker2015, figs 6:3, 14:8; see also Rutter Reference Rutter, Smith, Cavanagh, Bennet and Papadopoulosforthcoming.

31 Unpainted mugs appear to be a consistent feature of LH IIIB2/IIIC Early deposits in the Bay of Volos. For Pefkakia, see Batziou-Efstathiou Reference Batziou-Efstathiou, Weilhartner and Ruppenstein2015, 66, fig. 40; for Dimini, see Adrymi-Sismani Reference Adrymi-Sismani2014, 370, 554.

32 Grey Ware, as well as Handmade Burnished Ware, is attested at Dimini only in LH IIIC Early levels.

33 For a thorough discussion of this pottery group, including finds from this deposit, see Lis et al. Reference Lis, Kiriatzi, Rückl and Batziou2020.

34 One of the rims comes from a higher level (depth 5.70), dating to LH IIIC Middle.

35 Petrographic analysis of pottery from this deposit is being undertaken jointly by B. Lis and E. Kiriatzi, and will be published elsewhere.

36 Such marks, and their interpretation, matches closely impasto pottery from Punta di Zambrone (Fragnoli Reference Fragnoli and Jung2021, 307), as well as burnishing/wiping observed by Rutter (Reference Rutter1995, 58) on Early Helladic III coarse pottery from Lerna. We thank J. Rutter for pointing out the latter publication to us.

37 For good parallels from Broglio di Trebisacce (Calabria), see Bettelli Reference Bettelli2002, 79, fig. 28.

38 For parallels from Dosso di S. Benedetto Po (Lombardy), Bardellone-Sermide (Lombardy) and Casalbino (Emilia Romagna), see Cardarelli Reference Cardarelli2009, figs. 9:10.15, 13:1–3.

39 No exact parallels could be found in Italy, but impressed handles with horned protrusions are known from two sites in Emilia Romagna: Beneceto Forno del Gallo and Borgo Panigale, see Ferrari et al. Reference Ferrari, Bernabò Brea, Bronzoni, Basile, Bianchi, Guarisco and Bernabò Brea2018, fig. 7:2; Corazza et al. Reference Corazza, Di Renzoni, Finotelli, Poli and Bernabò Brea2018, fig. 3:5,12. In terms of shape, the best parallel comes from Villa Persolino (Emilia Romagna); see Damiani Reference Damiani2010, 321, pl. 114:10.

40 For a parallel from Coppa Nevigata (Puglia), see Lucci Reference Lucci and Gravina2018, fig. 3:2.

41 For parallels from Cortine (Marche) and Lipari, see Damiani Reference Damiani2010, 127, 134, pls 2:6, 7:1; from Punta di Zambrone, see Capriglione Reference Capriglione and Jung2021, 121, fig. 3:2.

42 See numerous examples from Tiryns (Kilian Reference Kilian2007, pls 3–10), or from the Menelaion (Catling and Catling Reference Catling and Catling1981, fig. 3).

43 These two rims are not included in the catalogue.

44 A very good parallel for the form and decoration on top of the rim derives from Roca (Apulia); see Pagliara et al. Reference Pagliara, Guglielmino, Coluccia, Malorgio, Merico, Palmisano, Rugge and Minnone2008, 254, fig. 11:9. Another fragment from Roca provides an even better parallel for decoration, but with different inclination of the neck; see Pagliara et al. Reference Pagliara, Maggiulli, Scarano, Pino, Guglielmino, De Grossi Mazzorin, Rugge, Fiorentino, Primavera, Calcagnile, D'Elia and Quarta2007, 338, fig. 13:IV.42.

45 Although closed shapes with vertical handles were in use on the Italian peninsula, none of the known examples has a handle with round section; they are invariably of a strap type. Another option for that vessel is that it is related to amphoras with such handles and conical necks, common in Macedonia and further north; see Hochstetter Reference Hochstetter1984, pl. 50:1–2. In that case, this would be a vessel of non-Italian origin/inspiration.

46 A study of a number of well deposits dating to the Early Iron Age at the Athenian Agora by B. Lis has revealed similar use-wear pattern on some of the vessels that were most likely used for the drawing of water.

47 See Lis and Van Damme Reference Lis and Van Damme2020, 200, fig. 11 for a similar type of use-wear.

48 KP No. 12 (Fig. 5) has greyish-brown fabric color, but is otherwise very similar to that group, also with a distinct pale slip.

49 The best parallels for this piece derive from Mycenae (Tournavitou Reference Tournavitou1995, 173, 180–7, pl. 27h), although they are thicker, and composed of two parts. However, the overall shape is similar, as is also a hole drilled through the ivory block.

50 Personal examination by the authors.

51 See for instance a number of features from megaron-type building no. 14 south of Megaron B complex (Adrymi-Sismani Reference Adrymi-Sismani2014, 564).

52 It is entirely missing from rich contexts at Dimini; see also Rutter Reference Rutter and Middleton2020, 215.

53 This is a common feature of most of the HBW assemblages in Greece and in Tell Kazel (Syria); see Jung Reference Jung, Maran and Stockhammer2012, 110–12.

54 In her interpretation of the appearance of HBW found at Dimini, Adrymi-Sismani (Reference Adrymi-Sismani and Mazarakis Ainian2006, 106) appears to favour changed economic circumstances after the destruction of the settlement in LH IIIB2, after which simpler ways of life were established and needs towards pottery consumption were reduced. However, this view does not take into account clearly foreign formal and technological associations of this pottery that are better interpreted as indicating the presence of immigrant population groups from Italy.

References

REFERENCES

Adrymi-Sismani, V. 2006. “Η γκρίζα ψευδομινύεια και η στιλβωμένη χειροποίητη κεραμική από τον μυκηναϊκό οικισμό Διμηνίου”, in Mazarakis Ainian, A. (ed.), Αρχαιολογικό Έργο Θεσσαλίας και Στερεάς Ελλάδας: Πρακτικά Επιστημονικής Συνάντησης Βόλος 27.2–2.3.2003 (Volos), 85110.Google Scholar
Adrymi-Sismani, V. 2013. Ο μυκηναϊκός οικισμός Διμηνίου: 1977–1997. 20 χρόνια ανασκαφών (Volos).Google Scholar
Adrymi-Sismani, V. 2014. Ιωλκός: η εϋκτιμένη πόλη του Ομήρου. Ένα αστικό κέντρο στον μύχο του Παγασητικού Κόλπου. Το διοικητικό κέντρο, οι οικίες και το νεκροταφείο (Volos).Google Scholar
Adrymi-Sismani, V. 2020. ‘The destruction of Mycenaean centres in Thessaly’, in Middleton, G.D. (ed.), Collapse and Transformation: The Late Bronze Age to Early Iron Age in the Aegean (Philadelphia, PA), 2333.CrossRefGoogle Scholar
Batziou, A. in print. ‘Three for one: the rise and fall of Iolkos’, in J. Maran, D. Panagiotopoulos and B.F. Steinman (eds), Ambivalent Times – The Mycenaean Palatial Period between Splendor and Demise. International Conference Held at the University of Heidelberg, Center for Ancient Studies, 1.–3. December 2018.Google Scholar
Batziou-Efstathiou, A. 1998. “Η Ύστερη Εποχή του Χαλκού στην Περιοχή της Μαγνησίας, το Κάστρο (Παλιά) και τα Πευκάκια” (unpublished PhD thesis, Aristotle University of Thessaloniki).Google Scholar
Batziou-Efstathiou, A. 2015. ‘The Mycenaean settlement at Pefkakia: the harbour of Iolkos?’, in Weilhartner, J. and Ruppenstein, F. (eds), Tradition and Innovation in the Mycenaean Palatial Polities (Vienna), 5185.Google Scholar
Belardelli, C. and Bettelli, M. 2007. ‘Different technological levels of pottery production: Barbarian and Grey Ware between the Aegean and Europe in the Late Bronze Age’, in Galanaki, I., Thomas, H., Galanakis, Y. and Laffineur, R. (eds), Between the Aegean and Baltic Seas: Prehistory across Borders. Proceedings of the International Conference Bronze and Early Iron Age Interconnections and Contemporary Developments between the Aegean and the Regions of the Balkan Peninsula, Central and Northern Europe, University of Zagreb, 11–14 April 2005 (Liège and Austin, TX), 481–5.Google Scholar
Bettelli, M. 2002. Italia meridionale e mondo miceneo. Ricerche su dinamiche di acculturazione e aspetti archeologici, con particolare riferimento ai versanti adriatico e ionico della penisola italiana (Florence).Google Scholar
Bettelli, M. 2009. ‘Handmade Burnished Ware e ceramica grigia tornita in Egeo nella tarda età del bronzo: una messa a punto’, SMEA 51, 95121.Google Scholar
Bettelli, M., Cardarelli, A. and Damiani, I. 2018. ‘Le ultime terramare e la Penisola: circolazione di modelli o diaspora?’, in Bernabò Brea, M. (ed.), Preistoria e protostoria dell'Emilia Romagna, vol. 2 (Florence), 187–98.Google Scholar
Boileau, M.-C., Badre, L., Capet, E., Jung, R. and Mommsen, H. 2010. ‘Foreign ceramic tradition, local clays: the Handmade Burnished Ware of Tell Kazel (Syria)’, JAS 37, 1678–89.Google Scholar
Cannavò, V. and Levi, S.T. 2018. Atlas of Ceramic Fabrics, vol. 1: Italy: North-East, Adriatic, Ionian, Bronze Age, Impasto (Oxford).CrossRefGoogle Scholar
Capriglione, C. 2021. ‘Punta di Zambrone (Calabri, Italy) and the recent Bronze Age in the Southern Tyrrhenian region’, in Jung, R. (ed.), Punta di Zambrone, vol. 1 (Vienna), 113–34.Google Scholar
Cardarelli, A. 2009. ‘The collapse of the Terramare culture and growth of new economic and social systems during the Late Bronze Age in Italy’, ScAnt 15, 449520.Google Scholar
Catling, H.W. and Catling, E.A. 1981. ‘“Barbarian” pottery from the Mycenaean settlement at the Menelaion, Sparta’, BSA 76, 7182.Google Scholar
Corazza, V., Di Renzoni, A., Finotelli, F. and Poli, V. 2018. ‘Il Bronzo recente in Emilia orientale e Romagna: scansioni cronologiche e caratteri della produzione ceramica’, in Bernabò Brea, M. (ed.), Preistoria e protostoria dell'Emilia Romagna, vol. 2 (Florence), 155–64.Google Scholar
D'Agata, A.L., Boileau, M.-C. and De Angelis, S. 2012. ‘Handmade Burnished Ware from the island of Crete: a view from the inside’, Rivista di Scienze Preistoriche 62, 295330.Google Scholar
Damiani, I. 2010. L'età del Bronzo recente nell'Italia centro-meridionale (Borgo San Lorenzo).Google Scholar
Döhl, H. 1973. ‘Iria: die Ergebnisse der Ausgrabungen 1939’, in Jantzen, U. (ed.), Tiryns: Forschungen und Berichte. Band VI (Mainz), 127–94.Google Scholar
Evely, D. (ed.) 2006. Lefkandi IV: The Bronze Age – The Late Helladic IIIC Settlement at Xeropolis (London).Google Scholar
Ferrari, P., Bernabò Brea, M., Bronzoni, L., Basile, C., Bianchi, P.A.E. and Guarisco, F. 2018. ‘L'area abitativa della prima fase nella terramara di Forno del Gallo a Beneceto (Parma)’, in Bernabò Brea, M. (ed.), Preistoria e Protostoria dell'Emilia Romagna, vol. 2 (Florence), 93100.Google Scholar
Fragnoli, P. 2021. ‘The impasto pottery of Punta di Zambrone (Vibo Valentia, Calabria): production, use, function and exchanges within the South-Italian recent Bronze Age scenario’, in Jung, R. (ed.), Punta di Zambrone, vol. 1 (Vienna), 303–20.Google Scholar
Gauss, W., Smetana, R., Rutter, J.B., Regner, Ch., Rusch, K., Stümpel, H., Rabbel, W., Ruppenstein, F., Heiden, J., Leibetseder, M., Tanner, A. and Hinker, Ch. 2015. ‘Aigeira 2013–2014: Bericht zu Aufarbeitung und Grabung’, ÖJh 84, 1150.Google Scholar
Guglielmino, R. 2013. ‘Minyan, Minyanizing, and Pseudominyan wares from Southern and Insular Italy’, in Graziadio, G., Guglielmino, R., Lenuzza, V. and Vitale, S. (eds), Φιλική Συναυλία. Studies in Mediterranean Archaeology for Mario Benzi (Oxford), 177–91.Google Scholar
Hale, C.M. 2016. ‘The Middle Helladic fine Gray Burnished (Gray Minyan) sequence at Mitrou, East Lokris’, Hesperia 85, 243–95.CrossRefGoogle Scholar
Hallager, E. and Hallager, B.P. 2000. The Greek-Swedish Excavations at the Agia Aikaterini Square, Kastelli, Khania 1970–1987. The Late Minoan IIIC Settlement (Stockholm).Google Scholar
Hochstetter, A. 1984. Kastanas: Ausgrabungen in Einem Siedlungshügel der Bronze- und Eisenzeit Makedoniens 1975–1979. Die Handgemachte Keramik. Schichten 19 bis 1 (Berlin).Google Scholar
Jones, R.E., Levi, S.T., Bettelli, M. and Vagnetti, L. 2014. Italo-Mycenaean Pottery: The Archaeological and Archaeometric Dimensions (Rome).Google Scholar
Jung, R. 2002. Ausgrabungen in Einem Siedlungshügel der Bronze- und Eisenzeit Makedoniens 1975–1979. Die Drehscheibenkeramik der Schichten 19 bis 11 (Kiel).Google Scholar
Jung, R. 2006. Chronologia Comparata: Vergleichende Chronologie von Südgriechenland und Süditalien von ca. 1700/1600 Bis 1000 v. u. Z. (Vienna).CrossRefGoogle Scholar
Jung, R. 2012. ‘Can we say, what's behind all those sherds? Ceramic innovations in the Eastern Mediterranean at the end of the second millennium’, in Maran, J. and Stockhammer, P.W. (eds), Materiality and Social Practice: Transformative Capacities of Intercultural Encounters (Oxford), 104–20.Google Scholar
Jung, R. 2018. ‘Push and pull factors of the Sea Peoples between Italy and the Levant’, in Driessen, J.M. (ed.), An Archaeology of Forced Migration: Crisis-Induced Mobility and the Collapse of the 13th c. bce Eastern Mediterranean (Louvain-la-Neuve), 273306.Google Scholar
Kardamaki, E. 2015. ‘Conclusions from the new deposit at the Western Staircase terrace at Tiryns’, in Schallin, A.-L. and Tournavitou, I. (eds), Mycenaeans up to Date. The Archaeology of the North-Eastern Peloponnese – Current Concepts and New Directions (Stockholm), 7997.Google Scholar
Karouzou, E. 2020. ‘Thessaly’, in Lemos, I. and Kotsonas, A. (eds), A Companion to the Archaeology of Early Greece and the Mediterranean (Chichester), 883912.Google Scholar
Kaza-Papageorgiou, K. and Kardamaki, E. 2018. ‘A Late Helladic III A1 deposit from Kontopigado, Alimos and processes of Mycenaeanization at Athens’, ΑΜ 133, 158.Google Scholar
Kilian, K. 2007. Tiryns: Die Handgemachte Geglättete Keramik Mykenischer Zeitstellung. Forschungen und Berichte. Band XV (Wiesbaden).Google Scholar
Levi, S.T. 1999. Produzione e Circolazione Della Ceramica Nella Sibaritide Protostorica. I. Impasto e Dolii (Florence).Google Scholar
Levi, S.T., Cannavò, V. and Brunelli, D. 2019. Atlas of Ceramic Fabrics, vol. 2: Italy: Southern Tyrrhenian: Neolithic–Bronze Age (Oxford).CrossRefGoogle Scholar
Lis, B. 2012a. ‘Aeginetan cooking pottery in Central Greece and its wider perspective’, in Mazarakis Ainian, A. (ed.), Αρχαιολογικό έργο Θεσσαλίας και Στερεάς Ελλάδας, 3. Proceedings of the 3rd Archaeological Meeting of Thessaly and Central Greece 2006–2008. From Prehistory to the Contemporary Period (Volos), 1203–11.Google Scholar
Lis, B. 2012b. ‘Late Bronze Age cooking pots from Mitrou and their change in the light of socio-economic transformations’ (unpublished PhD thesis, Polish Academy of Sciences).Google Scholar
Lis, B. 2013. ‘Let's start from (a) scratch: new ways of looking at vessels’ function’, ArcheologiaWar 61, 714.Google Scholar
Lis, B. 2018a. ‘Hand-made pottery groups in Mainland Greece during the 13th and 12th c. bc as a sign of economic crisis?’, in Caloi, I. and Langohr, C. (eds), Technology in Crisis. Technological Changes in Ceramic Production during Periods of Trouble (Louvain-La-Neuve), 139–49.Google Scholar
Lis, B. 2018b. ‘Potters in captivity? An alternative explanation for the Italo-Mycenaean pottery of the 13th century bce’, in Driessen, J.M. (ed.), An Archaeology of Forced Migration: Crisis-Induced Mobility and the Collapse of the 13th c. bce Eastern Mediterranean (Louvain-la-Neuve), 261–71.Google Scholar
Lis, B., Kiriatzi, E., Rückl, Š. and Batziou, A. 2020. ‘Dealing with the crisis: mobility of Aeginetan-tradition potters around 1200 bc’, BSA 115, 269327.Google Scholar
Lis, B. and Van Damme, T. 2020. ‘From texts and iconography to use-wear analysis of ceramic vessels: investigating a Mycenaean handwashing custom and its changing social significance’, JMA 33, 185210.CrossRefGoogle Scholar
Lucci, E. 2018. ‘La ceramica dai livelli subappenninici dei settori G2O, G3A, F3D di Coppa Nevigata (Manfredonia, FG)’, in Gravina, A. (ed.), Atti – Il 38° Convegno Nazionale sulla Preistoria, Protostoria, Storia della Daunia (San Severo), 237–56.Google Scholar
Malakasioti, Z. 1988. “Οδός Βελισαρίου 38 (οικόπεδο Αγγ. Κοκότσικα)”, ArchDelt 43, 239–41.Google Scholar
Malakasioti, Z. 1989. “Οδός Βελισαρίου 38 (οικόπεδο Αγγ. Κοκότσικα)”, ArchDelt 44, 218–19.Google Scholar
Maran, J. and Papadimitriou, A. 2006. ‘Forschungen im Stadtgebiet von Tiryns 1999–2002’, AA, 97133.Google Scholar
Maran, J. and Papadimitriou, A. 2016. ‘Gegen den Strom der Geschichte. Die nördliche Unterstadt von Tiryns: Ein gescheitertes Urbanisierungsprojekt der mykenischen Nachpalastzeit’, AA, 19118.Google Scholar
Mountjoy, P.A. 1986. Mycenaean Decorated Pottery: A Guide to Identification (Gothenburg).Google Scholar
Mountjoy, P.A. 1997. ‘The destruction of the Palace at Pylos reconsidered’, BSA 92, 109–37.Google Scholar
Mountjoy, P.A. 1999. Regional Mycenaean Decorated Pottery (Rahden).Google Scholar
Orton, C., Tyers, P. and Vince, A.G. 1993. Pottery in Archaeology (Cambridge).Google Scholar
Pagliara, C., Guglielmino, R., Coluccia, L., Malorgio, I., Merico, M., Palmisano, D., Rugge, M. and Minnone, F. 2008. ‘Roca Vecchia (Melendugno, Lecce), SAS IX: relazione stratigrafica preliminare sui livelli di occupazione protostorici (campagne di scavo 2005–2006)’, Rivista di Scienze Preistoriche 58, 239–79.Google Scholar
Pagliara, C., Maggiulli, G., Scarano, T., Pino, C., Guglielmino, R., De Grossi Mazzorin, J., Rugge, M., Fiorentino, G., Primavera, M., Calcagnile, L., D'Elia, M. and Quarta, G. 2007. ‘La sequenza cronostratigrafica delle fasi di occupazione dell'insediamento protostorico di Roca (Melendugno, Lecce). Relazione preliminare della campagna di scavo 2005 – Saggio X’, Rivista di Scienze Preistoriche 57, 311–62.Google Scholar
Pilides, D. and Boileau, M.-C. 2011. ‘Revisiting the Handmade Burnished Ware of Cyprus: new analytical techniques’, in Karageorghis, V. and Kouka, O. (eds), On Cooking Pots, Drinking Cups, Loomweights and Ethnicity in Bronze Age Cyprus and Neighbouring Regions (Nicosia), 113–28.Google Scholar
Popham, M. and Milburn, E. 1971. ‘The Late Helladic IIIC pottery of Xeropolis (Lefkandi): a summary’, BSA 66, 333–52.Google Scholar
Rutter, J.B. 1977. ‘Late Helladic IIIC pottery and some historical implications’, in Davies, E.N. (ed.), Symposium on the Dark Ages in Greece (New York), 120.Google Scholar
Rutter, J.B. 1995. Lerna: A Preclassical Site in the Argolid, vol. 3: The Pottery of Lerna IV (Princeton, NJ).Google Scholar
Rutter, J.B. 2020. ‘Late Palatial vs. Early Post-Palatial Mycenaean pottery (c. 1250–1150 bce): ceramic change during an episode of cultural collapse and regeneration’, in Middleton, G.D. (ed.), Collapse and Transformation: The Late Bronze Age to Early Iron Age in the Aegean (Philadelphia, PA), 209–19.CrossRefGoogle Scholar
Rutter, J.B. forthcoming. ‘Ceramic surprises at Late Helladic IIIC Aigeira’, in Smith, D., Cavanagh, W., Bennet, J. and Papadopoulos, A. (eds), The Wider Island of Pelops: Studies in Aegean Prehistoric Pottery in Memory of Prof. Chris Mee.Google Scholar
Skafida, E., Karnava, A., Agnousiotis, D. and Georgiou, I. 2018a. “Μυκηναϊκό κτιριακό συγκρότημα. Τάφροι ΙΙ και ΙΙΙ (του Δ. Ρ. Θεοχάρη)”, ArchDelt 68, 472–8.Google Scholar
Skafida, E., Karnava, A., Georgiou, I. and Agnousiotis, D. 2018b. “Ο οικισμός στο Κάστρο-Παλαιά Βόλου. Από τις έρευνες του Δημήτρη και της Μαρίας Θεοχάρη μέχρι σήμερα”, ArchDelt 69–70, 6582.Google Scholar
Skafida, E., Karnava, A., Georgiou, I., Agnousiotis, D., Karouzou, E., Kalogianni, A., Asderaki, E., Vaxevanopoulos, M., Georgiou, R., Topa, Ch., Dionisiou, M., Tsoumousli, E. and Margaritof, M. 2020. “Ο οικισμός της Ύστερης Εποχής Χαλκού στο «Κάστρο-Παλαιά» του Βόλου: Αποτελέσματα του ερευνητικού διεπιστημονικού προγραμμάτος και των πρόσφατων ερευνών, 2012–2014”, in Mazarakis Ainian, A. (ed.), Αρχαιολογικό έργο Θεσσαλίας και Στερεάς Ελλάδας, 5. 2015. Πρακτικά επιστημονικής συνάντησης Βόλος 26.2–1.3.2015 (Volos), 5768.Google Scholar
Stockhammer, P.W. 2008. ‘Kontinuität und Wandel. Die Keramik der Nachpalastzeit aus der Unterstadt von Tiryns’ (unpublished PhD thesis, University of Heidelberg).Google Scholar
Theocharis, D. 1956a. “Ιωλκός (Βόλος)”, Έργον, 4350.Google Scholar
Theocharis, D. 1956b. “Ἀνασκαφαί ἐν Ιωλκῷ”, Prakt, 119–30.Google Scholar
Thomas, P.M. 2005. ‘A deposit of Late Helladic IIIB1 pottery from Tsoungiza’, Hesperia 74, 451573.CrossRefGoogle Scholar
Tournavitou, I. 1995. The ‘Ivory Houses’ at Mycenae (London).Google Scholar
Vitale, S. 2006. ‘The LH IIIB–LH IIIC transition on the Mycenaean mainland: ceramic phases and terminology’, Hesperia 75, 177204.CrossRefGoogle Scholar
Vitale, S. 2011. ‘The Late Helladic IIIA2 pottery from Mitrou and its implications for the chronology of the Mycenaean mainland’, in Gauss, W., Lindblom, M., Smith, R.A.K. and Wright, J.C. (eds), Our Cups Are Full: Pottery and Society in the Aegean Bronze Age. Papers Presented to Jeremy B. Rutter on the Occasion of His 65th Birthday (Oxford), 331–44.CrossRefGoogle Scholar
Wardle, K.A. 1973. ‘A group of Late Helladic IIIB 2 pottery from within the Citadel at Mycenae: “The Causeway Deposit”’, BSA 68, 297348.Google Scholar
Whitbread, I.K. 1992. ‘Petrographic analysis of Barbarian Ware from the Menelaion, Sparta’, in Motyka Sanders, J. (ed.), Philolakōn: Lakonian Studies in Honour of Hector Catling (London), 297306.Google Scholar
Figure 0

Fig. 1. General plan of Kastro/Palaia in Volos with locations of Theocharis’ Trench III and Kokotsika plot excavations. Based on Theocharis 1956a, fig. 44 and Skafida et al. 2018a, fig. 55.

Figure 1

Fig. 2. Photograph showing level 5 during excavation. Arrow pointing to approximate N. Author: Z. Malakasioti. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 2

Fig. 3. Photograph showing detail of the hearth with sherds on top and a post hole, seen from SW. Author: Z. Malakasioti. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 3

Fig. 4. Decorated deep bowls. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 4

Fig. 5. Decorated deep bowls. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 5

Fig. 6. Photographs of non-inventoried open shapes mentioned in the text. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 6

Table 1. General percentages of various pottery groups based on rim EVE.

Figure 7

Table 2. Percentages of various groups within fine and fine painted pottery.

Figure 8

Table 3. Percentages of various decoration schemes among fine open and closed pottery.

Figure 9

Fig. 7. Decorated deep bowls. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 10

Fig. 8. Decorated cups, stemmed bowls and shallow bowl. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 11

Fig. 9. Decorated basins, kylix and kylix/bowl/dipper. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 12

Fig. 10. Decorated kraters. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 13

Fig. 11. Decorated jars and stirrup jars. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 14

Fig. 12. Photographs of non-inventoried monochrome painted/washed closed shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 15

Fig. 13. Various decorated closed shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 16

Fig. 14. Photographs of non-inventoried decorated closed shapes and unpainted open shapes mentioned in the text. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 17

Fig. 15. Unpainted open shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 18

Fig. 16. Grey Ware. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 19

Fig. 17. Cooking pottery and pithos. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 20

Fig. 18. Handmade Burnished Ware – various open shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 21

Fig. 19. Handmade Burnished Ware – large bowl and closed shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 22

Fig. 20. Handmade Burnished Ware – various closed shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 23

Fig. 21. Handmade Burnished Ware – various closed shapes. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 24

Fig. 22. Examples of use-wear on pottery from the Kokotsika plot. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Figure 25

Fig. 23. Small finds. © Ephorate of Antiquities of Magnesia, Hellenic Ministry of Culture and Sports.

Supplementary material: File

Lis and Batziou supplementary material

Lis and Batziou supplementary material 1

Download Lis and Batziou supplementary material(File)
File 15.4 KB
Supplementary material: File

Lis and Batziou supplementary material

Lis and Batziou supplementary material 2

Download Lis and Batziou supplementary material(File)
File 10.1 KB