Northern highbush blueberry is an important fresh market product in New Jersey where the plant was first domesticated in the early 20th century. Because of the short period for safely and timely applying postemergence (POST) herbicides, reliance on residual herbicides that provide season-long control of weeds is essential for blueberry growers to minimize the detrimental effect of weed competition on berry yield and quality and bush growth. Field studies were conducted from 2018 to 2020 in Chatsworth, New Jersey, on ‘Bluecrop’, ‘Duke’, and ‘Elliott’ blueberry cultivars growing on sandy acidic soil to evaluate weed control and crop tolerance in response to repeated annual applications of indaziflam at 73 or 146 g ai ha−1 applied in fall or spring. The efficacy of indaziflam treatments were compared to those of fall-applied dichlobenil at 3,300 g ai ha−1 or a spring-applied mix of diuron at 1,800 g ai ha−1, oryzalin at 3,360 g ai ha−1, and mesotrione at 210 g ai ha−1. Indaziflam at the currently labeled rate of 73 g ai ha−1 provided ≥85% and season-long control of horseweed, Canadian toadflax, and large crabgrass with fall applications on dormant blueberry, whereas spring applications were less effective. Whereas minor (≤8%) and transient leaf crinkling was noted in response to spring-applied indaziflam at 146 g ai ha−1, a fall application never caused leaf crinkling greater than that observed in the nontreated weedy and weed-free controls, regardless of rate. No negative effects on plant growth or fruit production were observed from indaziflam applied at 73 or 146 g ai ha−1 in fall or spring. Findings of this study suggest that indaziflam applied at 73 (1× commercial use rate) and 146 g ai ha−1 is safe to use on blueberry grown on New Jersey sandy acidic soils despite restrictions for using this herbicide on such soils.

Potato producers in Canada’s Atlantic provinces of Prince Edward Island (PE) and New Brunswick rely on photosystem II (PSII)-inhibiting herbicides to provide season-long weed control. Despite this fact, a high proportion of common lambsquarters populations in the region have been identified as resistant to this class of herbicides. Crop-topping is a late-season weed management practice that exploits the height differential between weeds and a developing crop canopy. Two field experiments were conducted in Harrington, PE, in 2020 and 2021, one each to evaluate the efficacy of a different crop-topping strategy, above-canopy mowing or wick-applied glyphosate, at two potato phenological stages, on common lambsquarters viable seed production and potato yield and quality. Mowing common lambsquarters postflowering decreased viable seed production (72% to 91%) in 2020 but increased seed production (78% to 278%) in 2021. Mowing had minimal impact on potato marketable yield across cultivars in both years. In contrast, treating common lambsquarters with wick-applied glyphosate had variable impacts on seed output in 2020 but dramatically reduced seed production (up to 95%) in 2021 when treatments were applied preflowering. Glyphosate damage to potato tubers was not influenced by timing and resulted in a 14% to 15% increase in culled tubers due to black spotting and rot. Our results highlight the importance of potato and common lambsquarters phenology when selecting a crop-topping strategy and demonstrate that above-canopy mowing and wick-applied glyphosate can be utilized for seedbank management of herbicide-resistant common lambsquarters in potato production systems.

The herbicides that inhibit 4-hydroxyphenylpyruvate dioxygenase (HPPD) are primarily used for weed control in corn, barley, oat, rice, sorghum, sugarcane, and wheat production fields in the United States. The objectives of this review were to summarize 1) the history of HPPD-inhibitor herbicides and their use in the United States; 2) HPPD-inhibitor resistant weeds, their mechanism of resistance, and management; 3) interaction of HPPD-inhibitor herbicides with other herbicides; and 4) the future of HPPD-inhibitor-resistant crops. As of 2022, three broadleaf weeds (Palmer amaranth, waterhemp, and wild radish) have evolved resistance to the HPPD inhibitor. The predominance of metabolic resistance to HPPD inhibitor was found in aforementioned three weed species. Management of HPPD-inhibitor-resistant weeds can be accomplished using alternate herbicides such as glyphosate, glufosinate, 2,4-D, or dicamba; however, metabolic resistance poses a serious challenge, because the weeds may be cross-resistant to other herbicide sites of action, leading to limited herbicide options. An HPPD-inhibitor herbicide is commonly applied with a photosystem II (PS II) inhibitor to increase efficacy and weed control spectrum. The synergism with an HPPD inhibitor arises from depletion of plastoquinones, which allows increased binding of a PS II inhibitor to the D1 protein. New HPPD inhibitors from the azole carboxamides class are in development and expected to be available in the near future. HPPD-inhibitor-resistant crops have been developed through overexpression of a resistant bacterial HPPD enzyme in plants and the overexpression of transgenes for HPPD and a microbial gene that enhances the production of the HPPD substrate. Isoxaflutole-resistant soybean is commercially available, and it is expected that soybean resistant to other HPPD inhibitor herbicides such as mesotrione, stacked with resistance to other herbicides, will be available in the near future.

Smooth scouringrush is a creeping perennial with a high silica content in stems that may impede herbicide uptake. Smooth scouringrush has become a troublesome weed in no-till cropping systems across eastern Washington. In previous field studies, glyphosate provided inconsistent control of smooth scouringrush. The objective of this study was to determine if the addition of an organosilicone surfactant to glyphosate would improve the efficacy and consistency of control through stomatal flooding. To test this hypothesis, glyphosate was applied at three field sites at 3.78 kg ae ha–1 alone, with an organosilicone surfactant (OS1 or OS2), an organosilicone plus nonionic surfactant blend, or an alcohol-based surfactant applied during the day or at night. Stem counts were recorded 1 yr after herbicide applications. Five of the six effective treatments observed across the three study sites included organosilicone surfactant or an organosilicone plus nonionic surfactant blend. At two sites, when there was a difference in efficacy between application times; daytime applications were more effective than nighttime applications. These results support the hypothesis of stomatal flooding as a likely mechanism for enhanced efficacy of glyphosate with the addition of an organosilicone surfactant. However, at one site, the treatments containing organosilicone surfactant were more efficacious when applied at night than during the day. At this site, high daytime temperatures and low relative humidity may have resulted in rapid evaporation of spray droplets. The addition of an organosilicone surfactant to glyphosate is recommended for smooth scouringrush control, and daytime treatments are preferred but should be applied when temperatures and humidity are not conducive to rapid droplet drying. Further research is necessary to confirm that stomatal flooding is responsible for improved glyphosate efficacy.

The distribution of herbicide-resistant weeds such as waterhemp has resulted in a greater need for a more integrated approach to weed management, especially in U.S. soybean production systems. Previous research has shown harvest weed seed control (HWSC) to be an effective method of reducing the amount of weed seed returning to the soil. One form of HWSC is the use of impact mills to destroy weed seed exiting the combine during harvest. In 2019 and 2020, we investigated the efficacy and operating costs of the Seed TerminatorTM impact mill in five Missouri soybean fields that contained significant waterhemp infestations. Results indicated that 22% to 40% of the available waterhemp seed in the field at harvest drops to the soil surface because of shatter whenever the combine reel contacts waterhemp plants. Across all locations, an average of 94% of waterhemp seed exiting the Seed Terminator™ was substantially damaged and considered nonviable. Consecutive seasons of use of the Seed TerminatorTM on the same field in two of the locations resulted in a 96% to 97% reduction of waterhemp in the soil seed bank the spring following the second harvest. The estimated increased operating cost of using a Seed Terminator™ was $14.18 ha–1 compared to harvesting with a conventional combine alone. Engine load increased by 12.5%, fuel consumption was 11.3 L h–1 and 1 L ha–1 greater with the Seed Terminator™, but there was no reduction in productivity when harvesting with a combine equipped with a Seed TerminatorTM compared to a conventional combine. The use of impact mills could play a significant role in reducing soil weed seed banks in soybean production systems in at least the Midwest region of the United States in the future.

Corn that is resistant to aryloxyphenoxypropionate, known commercially as Enlist™ corn, enables the use of quizalofop-p-ethyl (QPE) as a selective postemergence (POST) herbicide for control of glufosinate/glyphosate-resistant corn volunteers. Growers usually mix QPE with 2,4-D choline or glufosinate or both to achieve broad-spectrum weed control in Enlist corn. The objectives of this study were 1) to evaluate the efficacy of QPE applied alone or mixed with 2,4-D choline and/or glufosinate to control glufosinate/glyphosate-resistant corn volunteers in Enlist corn and 2) to determine the effect of application time (V3 or V6 growth stage of volunteer corn) of QPE-based treatments on volunteer corn control and Enlist corn injury and yield. Field experiments were conducted in Clay Center, NE, in 2021 and 2022. Quizalofop-p-ethyl (46 or 93 g ai ha−1) applied at the V3 or V6 growth stage controlled volunteer corn by ≥88% and ≥95% at 14 and 28 d after treatment (DAT), respectively. QPE (46 g ai ha−1) mixed with 2,4-D choline (800 g ae ha−1) produced 33% less than expected control of V3 volunteer corn in 2021, and 8% less than expected control of V6 volunteer corn in 2022 at 14 DAT. Volunteer corn control was improved by 7% to 9% using the higher rate of QPE (93 g ai ha−1) in a mixture with 2,4-D choline (1,060 g ae ha−1). QPE mixed with glufosinate had an additive effect and interactions in any combinations were additive beyond 28 DAT. Mixing 2,4-D choline can reduce QPE efficacy on glufosinate/glyphosate-resistant corn volunteers up to 14 DAT when applied at the V3 or V6 growth stage; however, the antagonistic interaction did not translate into corn yield loss. Increasing the rate of QPE (93 g ai ha−1) while mixing with 2,4-D choline can reduce antagonism.

The recent decline in pollinator abundance is a cause of concern for sustaining global food production. Several common weeds of managed turfgrass systems attract honeybees and other wild pollinators. As turfgrass often requires treatment with insecticides that harm bees, best practices are needed to prevent bees from visiting weed-infested turf areas that will be treated for insect pests. Weed control tactics can protect pollinator exposure to insecticides by reducing the floral resources afforded to bees from turfgrass weeds. Three field studies were conducted in 2021 and 2022 to evaluate the effect of various herbicides and herbicide formulation constituents on pollinator foraging and white clover floral morphology in managed tall fescue turfgrass. Treatments included a nontreated control; MCPP; 2,4-D; dicamba; Trimec Classic™ (2,4-D, MCPP, dicamba); Speedzone™ (carfentrazone, 2,4-D, MCPP, dicamba); and an herbicide-formulation constituent (inert ingredients of Speedzone™). All response variables were evaluated for 8 d, starting from one day before treatment and ending 6 d after treatment (DAT). The herbicide formulation constituent did not alter white clover flower density, floral discoloration, floral quality, or insect visitation compared to nontreated plots. Herbicides reduced flower density and floral quality to the same extent, but MCPP discolored white clover floral tissue 16% per day and less than all other herbicides except dicamba. Floral quality completely declined in approximately 5 d following any herbicide treatment. Bee visitation to white clover–infested turf increased by 3 bees min–1 for every 100 white clover blooms m–2. Honeybees and other insects vacated herbicide-treated areas in less than 2 d, despite minimal effects on floral quality and density at that time. The data suggest that practitioners could apply insecticides 2 d after auxin herbicide treatment and avoid harm to pollinators, but additional work is needed to directly measure pollinator exposure following such treatments.

In Iran, monochoria is a noxious weed in fields of transplanted rice. Two field experiments were conducted to assess the efficacy of soil-applied and foliar-applied herbicides to control monochoria in transplanted rice. Prepackaged herbicides (triafamone plus ethoxysulfuron applied at 40 g ai ha−1, pyrazosulfuron-ethyl plus pretilachlor applied at 382.5 g ai ha−1, and pendimethalin plus clomazone applied at 1,200 g ai ha−1) reduced monochoria biomass by 100%, 100%, and 14%, respectively; and a single application of flucetosulfuron at 30 g ai ha−1, pendimethalin at 990 g ai ha−1, thiobencarb at 2,750 g ai ha−1, and pretilachlor at 1,000 g ai ha−1 reduced monochoria biomass by 100%, 99%, 75%, and 56%, respectively, compared with a nontreated control. Tank-mixed bensulfuron-methyl at 45 g ai ha−1 applied with pretilachlor, thiobencarb, or pendimethalin provided 100% control of monochoria. Rice height, and straw and grain yield were greater after herbicide treatments than those of the nontreated and hand-weeded controls, indicating the advantages of chemical control of monochoria over manual weeding. Full-season monochoria interference reduced rice grain yield by 32%. In the second study, the herbicides triafamone plus ethoxysulfuron, flucetosulfuron, 2,4-D at 1,080 g ai ha−1, dicamba plus 2,4-D at 928 g ai ha−1, bispyribac-sodium at 31.25 g ai ha−1, bentazon plus MCPA at 1,150 g ai ha−1, pyribenzoxim at 30 g ai ha−1, and propanil at 5,400 g ai ha−1 applied to foliage at 4- to 5-leaf seedlings of monochoria provided ≥97% control and prevented 100% of its regrowth, with the exception of propanil. This study shows that monochoria control can be achieved by using a variety of residual and foliar-applied herbicides with different mechanisms of action.

Six field experiments were established in southwestern Ontario in 2021 and 2022 to evaluate whether the addition of a grass herbicide (acetochlor, dimethenamid-p, flufenacet, pendimethalin, pyroxasulfone, or S-metolachlor) to tolpyralate + atrazine improves late-season weed control in corn. Tolpyralate + atrazine caused 12% and 5% corn injury at 1 and 4 wk after herbicide application (WAA); corn injury was not increased with the addition of a grass herbicide. Weed interference reduced corn yield 60%. The addition of a grass herbicide to tolpyralate + atrazine did not enhance velvetleaf control. The addition of acetochlor or dimethenamid-p to tolpyralate + atrazine enhanced pigweed species control 4% 4 WAA; the addition of other grass herbicides tested did not increase pigweed species control. The addition of acetochlor enhanced common ragweed control 5% at 4 WAA, and the addition of acetochlor or dimethenamid-p enhanced common ragweed control 8% at 8 WAA; the addition of other grass herbicides did not improve common ragweed control. The addition of acetochlor to tolpyralate + atrazine enhanced common lambsquarters control up to 4%; there was no enhancement in common lambsquarters control with the addition of the other grass herbicides. Tolpyralate + atrazine controlled barnyardgrass 90% and 78% at 4 and 8 WAA, respectively; the addition of a grass herbicide enhanced barnyardgrass control 9% to 10% and 21% at 4 and 8 WAA, respectively. Tolpyralate + atrazine controlled green or giant foxtail 80% and 69% at 4 and 8 WAA, respectively; the addition of a grass herbicide enhanced foxtail species control 15% to 19% and 24% to 29% at 4 and 8 WAA, respectively. This research shows that adding a grass herbicide to tolpyralate + atrazine mixture can improve weed control efficacy, especially increased annual grass control in corn production.

Postemergence herbicides used to control weeds in the space between raised, plastic-covered beds in plasticulture production systems are typically banded, and herbicides are applied to weeds and to where weeds do not occur. To reduce the incidence of off-targeted applications, the University of Florida developed a smart-spray technology for row middles in plasticulture systems. The technology detects weed according to categories and applies herbicides only where the weeds occur. Field experiments were conducted at the Gulf Coast Research and Education Center in Balm, FL, in fall 2021 and spring 2022. The objective was to evaluate the efficacy of postemergence applications of diquat and glyphosate in row middles in jalapeno pepper fields when banded or applied with smart-spray technology. The overall precision of the weed detection model was 0.92 and 0.89 for fall and spring, respectively. The actuation precision achieved was 0.86 and 1 for fall and spring, respectively. No significant differences were observed between banded and targeted applications either with glyphosate or diquat in terms of broadleaf, grass, and nutsedge weed density. No significant pepper damage was observed with either herbicide or application technique. The smart-spray technology reduced herbicide application volume by 26% and 42% in fall and spring, respectively, with no reduction in weed control or pepper yield compared to a banded application. Overall, the smart-spray technology reduced the herbicide volume applied with no reductions in weed control and no significant effects on crop yield.

“Weedy” red rice is a problematic weed with phenotypic similarities to cultivated rice. Limited herbicide availability has driven a need for nonchemical control options for managing this pest. One preplanting strategy that is being explored is the stale seedbed methodology, which aims to maximize soil seedbank withdrawals via germination. This technique is adapted in rice by flooding a field, waiting for germination and emergence of weed seedlings, and completing the method with a mechanical or chemical control application. Optimization of this process is dependent on maximizing weed seed germination, which is primarily influenced by both temperature and moisture availability. Germinability across a range of these factors is not well understood in California red rice. Thus, this study aimed to determine germinability of California red rice accessions under various temperature and water potential treatments. Previously described red rice accessions 1, 2, 3, and 5, along with ‘M206’, a common California rice cultivar, were exposed to temperatures from 10 to 40 C in 5 C increments in combination with water potentials of 0, −0.2, −0.4, or −0.8 MPa until either germination or weed seed decay occurred. Statistical analysis indicated a three-way interaction between accession, temperature, and water potential. Germination reached 95% or greater when seeds were exposed to temperatures from 20 to 35 C in combination with 0 or −0.2 MPa. Germination was lowest when seeds were water stressed (−0.8 MPa) and when temperatures were colder than 20 C or warmer than 35 C. The ‘M206’ cultivar was utilized for comparison and demonstrated cold tolerance by germinating at 10 C, whereas weedy accessions 1, 2, and 3 did not. When temperatures were at or above 15 C, however, ‘M206’ germinated less often compared with all weedy accessions. Historical preplant temperatures in this region align with those required for weedy rice germination. Thus, the stale seedbed methodology is a viable strategy in years when ample floodwater is available.

Controlling weeds is a critically important task in sugarcane production systems. Weeds compete for light, nutrients, and water, and if they are not managed properly can negatively impact sugarcane yields. Accurate detection of weeds versus desired plants was assessed using hyperspectral and pigment analyses. Leaf samples were collected from four commercial Louisiana sugarcane varieties, and nine weed species commonly found in sugarcane fields. Hyperspectral leaf reflectance data (350 to 850 nm) were collected from all samples. Plant pigment (chlorophylls and carotenoids) levels were also determined using high-performance liquid chromatography, and concentrations were determined using authentic standards and leaf area. In all cases, leaf reflectance data successfully differentiated sugarcane from weeds using canonical discrimination analysis. Linear discriminant analysis showed that the accuracy of the classification varied from 67% to 100% for individual sugarcane varieties and weed species. In all cases, sugarcane was not misclassified as a weed. Plant pigment levels exhibited marked differences between sugarcane varieties and weed species with differences in chlorophyll and carotenoid explaining much of the observed variation in reflectance. The ratio of chlorophyll a to chlorophyll b showed significant differences between sugarcane and all weed species. The successful implementation of this technology as either an airborne system to scout and map weeds or a tractor-based system to identify and spray weeds in real-time would offer sugarcane growers a valuable tool for managing their crops. By accurately targeting weeds in sugarcane fields that are emerged and growing, the total amount of herbicide applied could be decreased, resulting in cost savings for the grower and reduced environmental impacts.

Cereal rye cover crop (cereal rye) and preemergence (PRE) herbicides are becoming common practices for managing herbicide-resistant weeds in soybean production. Adopting these two practices in combination raises concerns regarding herbicide fate in soil, given that the cereal rye biomass can intercept the herbicide spray solution, preventing it from reaching the soil. Delaying cereal rye termination until soybean planting (planting green) optimizes biomass accumulation but might also increase PRE interception. To better understand the dynamics between cereal rye and PRE herbicides, a field experiment was conducted to evaluate two soil management practices (tillage and no-till) and two cereal rye termination practices in the planting-green system (glyphosate [1,260 g ae ha−1] and roller-crimper) on the spray deposition and fate of PRE herbicides and soybean yield. The spray deposition was assessed by placing water-sensitive paper cards on the soil surface before spraying the PRE herbicides (sulfentrazone [153 g ai ha−1] + S-metolachlor [1,379 g ai ha−1]). Herbicide concentration in soil (0 to 7.6 cm) was quantified 25 d after treatment (DAT). The presence of no-till stubble and cereal rye biomass reduced the spray coverage compared to tillage at PRE application, which reflected in a reduction in the concentration of both herbicides in soil 25 DAT. Soybean yield was reduced in all three years when the cereal rye was terminated with a roller-crimper but only reduced in one year when terminated with glyphosate. Our findings indicate that mainly cereal rye biomass reduced the concentration of PRE herbicides in the soil due to the interception of the spray solution during application. Although higher cereal rye biomass accumulation can provide better weed suppression according to the literature, farmers should be aware that the biomass can lower the concentration of PRE herbicides reaching the soil, thus intensifying field scouting to ensure that weed control is not being negatively affected.

Herbicides are often used to terminate cover crops. Producers would like to use herbicides that work quickly, are effective, and do not increase the risk of selecting herbicide-resistant weeds. Eight experiments were conducted to determine whether mixing glyphosate (900 g a.e. ha−1) with rimsulfuron (15 g a.i. ha−1), mesotrione (100 g a.i. ha−1), or rimsulfuron + mesotrione enhances winter rye control and to ascertain whether using urea ammonium nitrate (UAN) as the herbicide carrier improves and accelerates herbicide efficacy. Winter rye control was assessed 1, 2, 3, and 4 wk after application (WAA) and biomass was measured 4 WAA. The addition of rimsulfuron, mesotrione, or rimsulfuron + mesotrione to glyphosate did not enhance winter rye control. Similarly, using UAN as the herbicide carrier did not improve or accelerate herbicide efficacy. Glyphosate alone provided the greatest level of winter rye control. The addition of rimsulfuron, mesotrione, or rimsulfuron + mesotrione to glyphosate did not increase the level or speed of control. However, mixing glyphosate with rimsulfuron, mesotrione, or rimsulfuron + mesotrione adds other modes of action without compromising winter rye control.

Potato is the third most important staple food crop globally following rice and wheat. In the United States, potato is grown on approximately 410,000 ha with a farm-gate value of US$1,032 million. In Canada, potato is grown on approximately 134,000 ha with a farm-gate value of US$235 million. The objective of this manuscript, compiled by the Weed Science Society of America Weed Loss Committee, was to estimate potato yield loss caused by weed interference. Potato yield data from weedy and weed-free plots (or plots with >95% weed control) was obtained from researchers working on weed management in potato in the United States and Canada or from published manuscripts from 2000 to 2018. Potato yield loss from weed interference was 12% to 61% when no weed management tactics were implemented. The average yield loss for all states/provinces (where data was obtained) due to weed interference was 44%. Weed interference would cause a farm-gate loss of approximately US$465 million and US$61 in the United States and Canada, respectively, if weeds are not controlled. These results indicate that weed management is critical for successful potato production, and that an ongoing need for research exists on weed management in this crop.

Ethofumesate is a broad-spectrum, soil-applied herbicide used to control broadleaf and grass weeds in sugarbeet crops. Ethofumesate is commonly applied preemergence at rates ranging from 1.25 to 4.2 kg ai ha−1, or applied postemergence (POST), up to 0.38 kg ai ha−1. The Generic Crop Science company has developed a new Ethofumesate 4SC label that has increased ethofumesate POST rates up to 4.48 kg ha−1 in sugarbeet with more than two true leaves per plant. Field and greenhouse experiments were conducted in 2018 and 2019 to evaluate sugarbeet tolerance and herbicide efficacy. Field tolerance experiments indicated sugarbeet stature from ethofumesate applied POST at 0.28, 0.56, and 1.12 kg ha−1 was the same as that of the nontreated control, but ethofumesate at 2.24 kg ha−1 reduced sugarbeet stature, although that rate did not affect yield components. Ethofumesate applied POST at 4.48 kg ha−1 reduced sugarbeet stature and affected sugarbeet yield components. Ethofumesate applied alone POST provided weed control of up to 85%, 76%, and 84% on common lambsquarters, redroot pigweed, and waterhemp, respectively, in field efficacy experiments. Mixing ethofumesate at 1.12 kg ha−1 with glyphosate does not provide a second effective herbicide for POST control of common lambsquarters or redroot pigweed, but it does provide residual control of these weeds when at least one-half inch of penetrating rainfall occurs, following application. In greenhouse experiments, ethofumesate alone or ethofumesate plus glyphosate applied to common lambsquarters, redroot pigweed, or waterhemp at heights of less than 2.5 cm provided the best combination of burndown and soil residual control compared with weeds that were 2.5 to 5 cm tall. Ethofumesate applied POST at 1.12 kg ha−1 plus glyphosate provided the best combination of tolerance and efficacy, especially on waterhemp.

Region- and system-specific research is needed to understand the viability of delayed cover-crop termination (i.e., planting green) as an integrated weed management (IWM) tactic in no-till soybean. In a 3-yr field experiment, we evaluated the potential for planting green to facilitate elimination of soil-applied, preemergence residual herbicides within a soybean phase of a 6-yr grain–forage cropping systems experiment in Pennsylvania. This IWM tactic was contrasted with a Standard treatment, which included 14 to 21 d pre-plant termination of cereal rye and a two-pass herbicide program with preemergence herbicides. A 63% increase in cereal rye biomass production was observed within the IWM treatment in 2019, but only a 22% and 33% increase in 2020 and 2021, respectively. In 2020, significantly lower volumetric water content (%VWC) was observed within the IWM treatment in dates closest to planting and greater %VWC at multiple dates in June and July compared to the Standard treatment. No differences occurred in soybean populations, but soybean biomass at the V4 growth stage was reduced in the Standard treatment compared to the IWM treatment, which we attribute to injury from preemergence applications. The Standard treatment resulted in greater soybean yield (2,590 kg ha–1) than the IWM treatment (1,870 kg ha–1) in 2020, but yields were similar in other years. The IWM treatment resulted in 58% fewer herbicide inputs, as measured by the number of active ingredients applied, compared to the Standard over the 3-yr study. Yet, peak weed biomass did not differ between treatments. However, the IWM treatment resulted in greater total horseweed density and the number of horseweed plants that exceeded recommended size-based height thresholds (10 cm) compared to the Standard treatment just prior to postemergence applications (35–42 d after planting) in 2020 and 2021, underscoring the importance of integrating surface mulch residues with effective herbicide sites of action.

Herbicide resistance in Palmer amaranth and waterhemp is on the rise and poses a great concern to growers in the United States. A multistate screening was conducted for these two weed species in the United States to assess their sensitivity to glufosinate, dicamba, and 2,4-D. The screening was designed to understand the weed sensitivity landscape and emerging trends in resistance evolution by testing each herbicide at its respective label rate and at half the label rate. A total of 303 weed seed accessions from 21 states representing 162 Palmer amaranth and 141 waterhemp seeds were collected from grower fields in 2019 and screened in greenhouse conditions. Statistical power of different sample sizes and probability of survivors in each accession were estimated for each species and herbicide treatment. Overall, the efficacy of glufosinate, dicamba, and 2,4-D against all these accessions was excellent, with greater than 90% average injury. The variability in herbicide injury, if any, was greater with half the label rate of 2,4-D in some Palmer amaranth accessions, while waterhemp accessions had exhibited variable sensitivity with half the label rate of dicamba and glufosinate. The study highlights the value of monitoring weeds for herbicide sensitivity across broader landscape and the importance of glufosinate, dicamba, and 2,4-D herbicides in managing troublesome weeds as part of a diversified weed control program integrated with other chemical, mechanical and cultural practices.

Successful cover crop (CC) establishment in the fall is important to maximize CC production, which is critical for achieving many objectives of CCs. Competition from winter weeds may reduce CC establishment and biomass production. A preplant herbicide, such as paraquat, at the time of CC planting in the fall will reduce winter weed pressure resulting in better establishment and growth. An experiment was conducted between 2019 and 2021 to test this hypothesis by evaluating a no-CC check, cereal rye, hairy vetch, crimson clover, and cereal rye + hairy vetch drilled with and without paraquat applied at planting (mid-October to mid-November) following either a corn or soybean crop. Visible weed suppression ratings were collected in mid-April, and total CC and weed biomass was collected in late April. More CC biomass was accumulated following corn than soybean, regardless of preplant herbicide application, because corn is typically harvested before soybeans. Therefore, CCs should be planted early to accumulate more biomass. Weed suppression varied by weed species from all factors, but in general weed suppression was best from a CC mixture containing cereal rye and paraquat applied at planting. If weed suppression is the main goal of the CC, then a preplant herbicide at CC planting is recommended. However, if CC weed suppression goals can be achieved through biomass accumulation, no preplant herbicide is needed. This information is useful for producers to achieve various CC objectives while managing costs.

Investigations of the relevance of low-tunnel methodology and air sampling concerning the off-target movement of dicamba were conducted from 2018 to 2022, focused primarily on volatility. This research, divided into three experiments, evaluated the impact of herbicides and adjuvants added to dicamba and the type of surface treated on dicamba volatility. Treatment combinations included glyphosate and glufosinate, the presence of a simulated contamination rate of ammonium sulfate (AMS), the benefit of a volatility reduction agent (VRA), and a vegetated (dicamba-resistant cotton) or soil surface treated with dicamba. Volatility assessments included air sampling collected over 48 h. Dicamba treatments were applied four times to each of two bare soil or cotton trays and placed inside the tunnels. Dicamba from air samples was extracted and quantified. Field assessments included the maximum and average visible injury in bioindicator soybean and the lateral movement of dicamba damage expressed by the farthest distance from the center of the plots to the position in which plants exhibited 5% injury. Adding glufosinate and glyphosate to dicamba increased the dicamba amount in air samples. A simulated tank contamination rate of AMS (0.005% v/v) did not affect dicamba emissions compared to a treatment lacking AMS. Adding a VRA reduced dicamba in air samples by 70% compared to treatment without the adjuvant. Dicamba treatments applied on vegetation generally produced greater detectable amounts of dicamba than treatments applied to bare soil. Field assessment results usually followed differences in dicamba concentration by treatments tested. Results showed that low-tunnel methodology allowed simultaneous comparisons of several treatment combinations concerning dicamba volatility.