Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-25T05:14:52.425Z Has data issue: false hasContentIssue false

Surface and electrical properties of plasma processed RF sputtered GaN thin films

Published online by Cambridge University Press:  05 December 2014

Subramani Shanmugan*
Affiliation:
Nano Optoelectronics Research Laboratory, School of Physics, Universiti Sains Malaysia (USM), 11800 Minden, Pulau Pinang, Malaysia
Devarajan Mutharasu
Affiliation:
Nano Optoelectronics Research Laboratory, School of Physics, Universiti Sains Malaysia (USM), 11800 Minden, Pulau Pinang, Malaysia
Zhi Yin Lee
Affiliation:
Nano Optoelectronics Research Laboratory, School of Physics, Universiti Sains Malaysia (USM), 11800 Minden, Pulau Pinang, Malaysia
*
Get access

Abstract

Plasma processing is an approach to modify the surface structure for improved performance of nitride semiconductor using in light emitting diodes. In this work, RF sputtered GaN thin films were synthesized on Si (1 0 0) substrates and processed at two different plasmas (N2 and O2) at various flow rates. The surface nature of plasma processed thin films was characterized using atomic force microscope (AFM) and scanning electron microscope (SEM). Energy dispersive spectrum (EDS) of all samples was recorded to do elemental analysis. Noticeable changes on surface morphology were recorded for the plasma processed GaN thin films at high flow rate (>20 sccm). The roughness and particle size of thin film got decreased as the flow rate of gases increased. Low value in surface roughness (0.26 nm) and particles size (14 nm) was observed at 30 sccm flow rate of O2. SEM images also revealed the surface modification at high gas flow rates during plasma process. Nitrogen deficient GaN thin film was confirmed by EDS spectra and improved N2 concentration was achieved for N2 and O2 plasma processing upto 20 sccm flow rates. I-V characteristics showed the Schottky-contact behavior for all thin films and revealed the improved surface quality to make good ohmic contact for the film processed at high gas flow rate (>30 sccm).

Type
Research Article
Copyright
© EDP Sciences, 2014

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Pankove, J.I., Material Research Society Proceedings 97, 409 (1987)CrossRef
Nguyen, X.L., Nguyen, T.N.N., Chau, V.T., Dang, M.C., Adv. Nat. Sci. Nanosci. Nanotechnol. 1, 025015 (2010)CrossRef
Doppalapudi, D., Iliopoulos, E., Basu, S.N., Moustakas, T.D., J. Appl. Phys. 85, 3582 (1999)CrossRef
Wang, C.-W., Soong, B.S., Chen, J.Y., Chen, C.L., Su, Y.K., J. Appl. Phys. 88, 6355 (2000)CrossRef
Shen, K.-C., Jiang, M.-C., Liu, H.-R., Hsueh, H.-H., Kao, Y.-C., Horng, R.-H., Wuu, D.-S., Opt. Express 21, 26468 (2013)CrossRef
Song, Y.K., Zhou, H., Diagne, M., Nurmikko, A.V., Schneider, R.P. Jr, Kuo, C.P., Krames, M.R., Kern, R.S., Carter-Coman, C., Kish, F.A., Appl. Phys. Lett. 76, 1662 (2000)CrossRef
Wong, W.S., Sands, T., Appl. Phys. Lett. 77, 2822 (2000)CrossRef
Song, Y.K., Diagne, M., Zhou, H., Nurmikko, A.V., Schneider, R.P., Takeuchi, T., Appl. Phys. Lett. 77, 1744 (2000)CrossRef
Verdonck, P., Plasma Etching, Centro de Componentes Semiconductores (2006), pp. 111Google Scholar
Smith, S.A., Wolden, C.A., Bremser, M.D., Hanser, A.D., Davis, R.F., Lampert, W.V., Appl. Phys. Lett. 71 (25), 3631 (1997)CrossRef
Lee, J.-M., Chang, K.-M., Kim, K.-K., Choi, W.-K., Park, S.-J., J. Electrochem. Soc. 148, G1 (2001)CrossRef
Lee, J.S., Lee, J., Kim, S., Jeon, H., IEEE Photonics Technol. Lett. 18, 1588 (2006)
Li, L.K., Tan, L.S., Chor, E.F., J. Cryst. Growth 268, 499 (2004)CrossRef
Pal, S., Mahapatra, R., Ray, S.K., Chakraborty, B.R., Shivaprasad, S.M., Lahiri, S.K., Bose, D.N., Thin Solid Films 425, 20 (2003)CrossRef
Lee, S.H., Yu, Y.M., J. Korean Phys. Soc. 51, S79 (2007)CrossRef