Hostname: page-component-745bb68f8f-kw2vx Total loading time: 0 Render date: 2025-01-13T18:41:29.486Z Has data issue: false hasContentIssue false
  • English
  • Français

Prediction of losses in induction machines: a challenge for the modelling approaches

Published online by Cambridge University Press:  28 January 2005

O. Bottauscio ,
M. Chiampi ,
A. Manzin  and
M. Zucca
O. Bottauscio*
Affiliation:
Istituto Elettrotecnico Nazionale Galileo Ferraris, strada delle Cacce 91, 10135 Torino, Italy
M. Chiampi
Affiliation:
Dipartimento Ingegneria Elettrica Industriale, Politecnico di Torino, corso Duca degli Abruzzi 24, 10129 Torino, Italy
A. Manzin
Affiliation:
Istituto Elettrotecnico Nazionale Galileo Ferraris, strada delle Cacce 91, 10135 Torino, Italy
M. Zucca
Affiliation:
Istituto Elettrotecnico Nazionale Galileo Ferraris, strada delle Cacce 91, 10135 Torino, Italy
*
[email protected]
Get access

Abstract

This paper presents and discusses some numerical approaches for the simulation of induction machine behaviour under no-load conditions. All the approaches are based on the finite element solution of the electromagnetic field problem, including physical models of magnetic material and interaction with external circuits. The computed flux distributions enable the prediction of magnetic and additional losses, whose accuracy is discussed also in the light of the complexity of the used numerical technique.

Keywords

Type
Research Article
Information
The European Physical Journal - Applied Physics , Volume 30 , Issue 1 , April 2005 , pp. 7 - 16
Copyright
© EDP Sciences, 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Saitz, J., IEEE Trans. Magn. 36, 769 (2000) CrossRef
Gyselinck, J.J.C. et al., IEEE Trans. Magn. 36, 856 (2000) CrossRef
Bertotti, G., Boglietti, A., Chiampi, M., Chiarabaglio, D., Fiorillo, F., Lazzari, M., IEEE Trans. Magn. 27, 5007 (1991) CrossRef
Chevalier, T., Kedous-Lebouc, A., Cornut, B., Cester, C., IEEE Trans. Magn. 35, 3400 (2002) CrossRef
Zhu, J.G., Ramsden, V.S., IEEE Trans. Magn. 34, 2234 (1998) CrossRef
Sadowski, N., Lajoie-Mazenc, M., Bastos, J.P.A., Ferreira da, M.V. Luz, P. Kuo-Peng, IEEE Trans. Magn. 36, 1923 (2000) CrossRef
Lorimer, W.L., Lieu, D.K., IEEE Trans. Magn. 35, 2146 (1999) CrossRef
Bottauscio, O., Canova, A., Chiampi, M., Repetto, M., IEEE Trans. Magn. 38, 805 (2002) CrossRef
Appino, C. et al., J. Appl. Phys. 79, 4575 (1996) CrossRef
Bottauscio, O., Chiampi, M., Chiarabaglio, D., IEEE Trans. Magn. 36, 561 (2000) CrossRef
Bottauscio, O., Chiampi, M., IEEE Trans. Magn. 38, 2358 (2002) CrossRef
Chiampi, M., Negro, A., Tartaglia, M., IEEE Trans. Magn. 16, 1413 (1980) CrossRef
Boglietti, A., Bottauscio, O., Chiampi, M., Lazzari, M., J. Magn. Magn. Mater. 254-255, 244 (2003) CrossRef
Tsukerman, I.A., IEEE Trans. Magn. 28, 2247 (1992) CrossRef
Proekt, L., Tsukerman, I.A., IEEE Trans. Magn. 38, 741 (2002) CrossRef
Lai, H.C., Coles, P.C., Rodger, D., Leonard, P.J., IEEE Trans. Magn. 36, 1462 (2000)
Bottauscio, O., Chiampi, M., Manzin, A., IEEE Trans. Magn. 40, 541 (2004) CrossRef
I.D. Mayergoyz, Mathematical Models of Hysteresis (Springer-Verlag, New York, 1991)
Ragusa, C., Repetto, M., Physica B 275, 92 (2000) CrossRef
Hantila, I.F., Rev. Roum. Sci. Tech. – Electrotech. Energy 20, 397 (1975)
Fiorillo, F., Novikov, A., IEEE Trans. Magn. 26, 2904 (1990) CrossRef
Technical Report of EU Brite Euram project No. BRPR950019, “Characterisation of losses in electrical steels” (CHARLES), 1996-1998
Bottauscio, O., Chiampi, M., Zucca, M., IEEE Trans. Magn. 38, 3294 (2002) CrossRef