Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-19T07:24:40.166Z Has data issue: false hasContentIssue false
  • English
  • Français

A planar anode-supported Solid Oxide Fuel Cell model with internal reforming of natural gas

Published online by Cambridge University Press:  19 May 2011

P. Chinda ,
S. Chanchaona ,
P. Brault  and
W. Wechsatol
P. Chinda
Affiliation:
Department of Mechanical Engineering, King Mongkut's University of Technology Thonburi, 126 Pracha-utid Road, Bangmod, Thungkru, 10140 Bangkok, Thailand
S. Chanchaona
Affiliation:
Department of Mechanical Engineering, King Mongkut's University of Technology Thonburi, 126 Pracha-utid Road, Bangmod, Thungkru, 10140 Bangkok, Thailand
P. Brault*
Affiliation:
Groupe de Recherche sur l'Énergétique des Milieux Ionisés (GREMI), UMR 6606 CNRS-Université d'Orléans, BP 6744, 45067 Orléans Cedex 2, France
W. Wechsatol
Affiliation:
Department of Mechanical Engineering, King Mongkut's University of Technology Thonburi, 126 Pracha-utid Road, Bangmod, Thungkru, 10140 Bangkok, Thailand
*
aemail: [email protected]
Get access

Abstract

Solid Oxide Fuel Cells (SOFCs) are of great interest due to their high energy efficiency, low emission level, and multiple fuel utilization. SOFC can operate with various kinds of fuels such as natural gas, carbon monoxide, methanol, ethanol, and hydrocarbon compounds, and they are becoming one of the main competitors among environmentally friendly energy sources for the future. In this study, a mathematical model of a co-flow planar anode-supported solid oxide fuel cell with internal reforming of natural gas has been developed. The model simultaneously solves mass, energy transport equations, and chemical as well as electrochemical reactions. The model can effectively predict the compound species distributions as well as the cell performance under specific operating conditions. The main result is a rather small temperature gradient obtained at 800 °C with S/C = 1 in classical operating conditions. The cell performance is reported for several operating temperatures and pressures. The cell performance is specified in terms of cell voltage and power density at any specific current density. The influence of electrode microstructure on cell performance was investigated. The simulation results show that the steady state performance is almost insensitive to microstructure of cells such as porosity and tortuosity unlike the operating pressure and temperature. However, for SOFC power output enhancement, the power output could be maximized by adjusting the pore size to an optimal value, similarly to porosity and tortuosity. At standard operating pressure (1 atm) and 800 °C with 48% fuel utilization, when an output cell voltage was 0.73 V, a current density of 0.38 A cm-2 with a power density of 0.28 W cm-2 was predicted. The accuracy of the model was validated by comparing with existing experimental results from the available literature.

Type
Research Article
Information
The European Physical Journal - Applied Physics , Volume 54 , Issue 2: Focus on Fuel Cells 2009 , May 2011 , 23405
Copyright
© EDP Sciences, 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

S.C. Singhal, K. Kendall, High Temperature Solid Oxide Fuel Cells: Fundamentals Design and Applications (Elsevier, Oxford, 2003)
J. Larminie, A. Dicks, Fuel Cell Systems Explained (John Wiley & Sons, Chichester, 2003)
Aguiar, P., Adjiman, C.S., Brandon, N.P., J. Power Sources 138, 120 (2004) CrossRef
Yakabe, H., Hishinuma, M., Uratani, M., Matsuzaki, Y., Yasuda, I., J. Power Sources 86, 423 (2000) CrossRef
Lehnert, W., Meusinger, J., Thom, F., J. Power Sources 87, 57 (2000) CrossRef
Suwanwarangkul, R., Croiset, E., Fowler, M.W., Douglas, P.L., Entchev, E., Douglas, M.A., J. Power Sources 122, 9 (2003) CrossRef
Ackmann, T., De Haart, L.G.J., Lehnert, W., Stolten, D., J. Electrochem. Soc. 150, A783 (2003) CrossRef
Morel, B., Laurencin, J., Bultel, Y., Lefebvre-Joud, F., J. Electrochem. Soc. 152, A1382 (2005) CrossRef
Nikooyeh, K., Jeje, A.A., Hill, J.A., J. Power Sources 171, 601 (2007) CrossRef
Pramuanjaroenkij, A., Kakac, S., Zhou, X.Y., Int. J. Hydrogen Energy 33, 2547 (2008) CrossRef
Ho, T.X., Kosinski, P., Hoffmann, A.C., Vik, A., Int. J. Hydrogen Energy 34, 3488 (2009) CrossRef
Ho, T.X., Kosinski, P., Hoffmann, A.C., Vik, A., Chem. Eng. Sci. 64, 3000 (2009) CrossRef
Ho, T.X., Kosinski, P., Hoffmann, A.C., Vik, A., Int. J. Hydrogen Energy 35, 4276 (2010) CrossRef
Ho, T.X., Kosinski, P., Hoffmann, A.C., Vik, A., J. Power Sources 195, 6764 (2010) CrossRef
Meusinger, J., Riensche, E., Stimming, U., J. Power Sources 71, 315 (1998) CrossRef
Tod, B., Young, J.B., J. Power Sources 110, 186 (2002) CrossRef
R.B. Bird, W.E. Stewart, E.N. Lightfoot, Transport Phenomena, 2nd edn. (John Wiley & Sons, New York, 2001)
Haberman, B.A., Young, J.B., Int. J. Heat Mass Transfer 47, 3617 (2004) CrossRef
N.P. Cheremisinoff, Handbook of Heat and Mass Transfer (Editor, GPC, 1986), p. 895
Liu, J., Barnett, S.A., J. Solid State Ion. 158, 11 (2003) CrossRef
Janardhanan, V.M., Deutschmann, O., J. Power Sources 162, 1192 (2006) CrossRef
Hussain, M.M., Li, X., Dincer, I., J. Power Sources 161, 1012 (2006) CrossRef
R. O'Hayre, S.W. Cha, W. Colella, F.B. Prinz, Fuel Cell Fundamentals (John Wiley & Sons, New York, 2006)
Costamagna, P., Costa, P., Antonucci, V., Electrochim. Acta 43, 375 (1998) CrossRef
Khaleel, M.A., Lin, Z., Singh, P., Surdoval, W., Collin, D., J. Power Sources 130, 136 (2004) CrossRef