Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-27T07:05:38.539Z Has data issue: false hasContentIssue false
  • English
  • Français

Optimization of a finite element mesh for large air-gap deformations*

Published online by Cambridge University Press:  15 February 2001

V. Leconte ,
C. Herault ,
Y. Marechal ,
G. Meunier  and
V. Mazauric
V. Leconte*
Affiliation:
Laboratoire d'Électrotechnique de Grenoble (INPG-UJF, CNRS UMR 552), BP 46, 38402 Saint-Martin d'Hères Cedex, France Schneider Electric - Research center A2, 38050 Grenoble Cedex 9, France
C. Herault
Affiliation:
Laboratoire d'Électrotechnique de Grenoble (INPG-UJF, CNRS UMR 552), BP 46, 38402 Saint-Martin d'Hères Cedex, France
Y. Marechal
Affiliation:
Laboratoire d'Électrotechnique de Grenoble (INPG-UJF, CNRS UMR 552), BP 46, 38402 Saint-Martin d'Hères Cedex, France
G. Meunier
Affiliation:
Laboratoire d'Électrotechnique de Grenoble (INPG-UJF, CNRS UMR 552), BP 46, 38402 Saint-Martin d'Hères Cedex, France
V. Mazauric
Affiliation:
Schneider Electric - Research center A2, 38050 Grenoble Cedex 9, France
*
[email protected]
Get access

Abstract

When performing the analysis of electromechanical transient problems with movement, it is needed to take into account the air gap deformation with time. A new remeshing procedure is proposed. It is based on node displacements coupled to a Delaunay algorithm. The node movement is described using bubbles in association with a physical model. The procedure generates high-quality meshes.

Keywords

Type
Research Article
Information
The European Physical Journal - Applied Physics , Volume 13 , Issue 2 , February 2001 , pp. 137 - 142
Copyright
© EDP Sciences, 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

This paper has been presented at NUMELEC 2000.

References

Davat, B., Ren, Z., Lajoie-Mazenc, M., IEEE Trans. Magn. 21, 2296 (1985). CrossRef
Shimada, K., Gossard, D.C., Comput. Aided Geom. Des. 15, 199 (1998). CrossRef
J.Y. Talon, Génération et amélioration de maillages 2D et 3D pour éléments finis, Thèse de doctorat, INPG, 1989.
Hermeline, F., RAIRO Anal. Num. 13, 211 (1982). CrossRef
J.B. Albertini, Contribution à la réalisation d'un logiciel de modélisation de phénomènes électromagnétiques en 3D par la méthode des élements finis: FLUX3D, Thèse de doctorat, INPG, 1988.
L. Saludjian, Optimisations en electrotechnique par algorithmes génétiques, Thèse de doctorat, INPG, 1997.
R. Lohner, K. Morgan, O.C. Zienkiewicz, Adaptive grid refinement for compressible euler equations, in Accuracy estimates and adaptive refinements in finite element computations, edited by I. Babuska et al. (Wiley, 1986), pp. 281-297.
F. Bossen, Anisotropic mesh generation with particles, Tech. Rep. CMU-CS-96-134, School of Computer Science, Carnegie Mellon University, May 13, 1996.
Cingoski, V., Murakawa, R., Kaneda, K., Yamashita, H., J. Appl. Phys. 81, 4085 (1997).
Razek, A.A., Coulomb, J.L., Feliachi, M., Sabonadière, J.C., IEEE Trans. Magn. 18, 655 (1982). CrossRef
Golovanov, C., Coulomb, J.L., Maréchal, Y., Meunier, G., IEEE Trans. Magn. 34, 3359 (1998). CrossRef
A. Buffa, F. Rapetti, Y. Maday, Calculation of eddy currents in moving structures by a sliding mesh-finite elements method, in COMPUMAG (Sapporo, 1999), pp. 368-369.
Kurz, S., Fetzer, J., Lehner, G., Rucker, W.M., IEEE Trans. Magn. 34, 3068 (1998). CrossRef
C. Hérault, Vers une simulation sans maillage des phénomènes électromagnétiques, Thèse de doctorat, INPG, 2000.
Tani, K., Yamada, T., Kawase, Y., IEEE Trans. Magn. 34, 3371 (1998). CrossRef
T. Coupez, Grandes transformations et remaillage automatique, Thèse de doctorat, École Nationale Supérieure des Mines de Paris, 1991.
B. Duval, Optimisation de maillages non structurés dans des géométries déformables, Thèse de doctorat, Université de Rouen, 1996.
P.L. George, F. Hecht, E. Satel, Automatic mesh generator with specified boundary, in Computer Methods in Applied Mechanics Engineering (Elsevier Science, North-Holland, 1991), Vol. 92, pp. 269-288.
M. Desbrun, M.P. Gascuel, Smoothed particles: a new paradigm for animating highly deformable bodies, Tech. Rep., GRAVIR-IMAG.
J. Ruppert, A new and simple algorithm for quality-2d mesh generation, in 4th ACM-SIAM Symp. on Discrete Algorithms, 1993, pp. 83-92.