Hostname: page-component-6bf8c574d5-5ws7s Total loading time: 0 Render date: 2025-03-07T16:14:08.314Z Has data issue: false hasContentIssue false
  • English
  • Français

Modeling and experimental characterization of saturation effect of an induction machine

Published online by Cambridge University Press:  15 May 2000

T. Kasmieh ,
Y. Lefevre  and
J. C. Hapiot
T. Kasmieh*
Affiliation:
LAE, HIAST (Higher Institute of Applied Sciences and Technology), BP 60318 Damascus, Syria
Y. Lefevre
Affiliation:
LEEI, INPT (Institut National Polytechnique de Toulouse), BP 7122, 31071 Toulouse Cedex 7, France
J. C. Hapiot
Affiliation:
LEEI, INPT (Institut National Polytechnique de Toulouse), BP 7122, 31071 Toulouse Cedex 7, France
*
[email protected]
Get access

Abstract

This paper presents a new experimental measurement method of the electrical parameters, shown from the stator, of a squirrel cage induction machine in accordance with its magnetic saturation level. It develops a new two-phase saturated model of the induction machine which uses these measured electrical parameters. This new measurement method has a very big advantage in the industrial domain. It avoids the use of a finite elements calculation program which takes much more time to calculate the electrical parameters. The experimental measurement method is applied on a 4 KW squirrel cage induction machine. A comparison between the real dynamic response of this machine, and the dynamic response of the new two-phase saturated model shows that the obtained results are very encouraging.

Keywords

Type
Research Article
Information
The European Physical Journal - Applied Physics , Volume 10 , Issue 2 , May 2000 , pp. 123 - 130
Copyright
© EDP Sciences, 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Chalmers, J.C., Dodgson, R., IEEE Trans. Power Appar. and Syst. 90, 564 (1971). CrossRef
Ojo, O., Vipin, M., Bhat, I., IEEE Trans. Ind. Appl. 30, 1638 (1994). CrossRef
Vas, P., Alakula, M., IEEE Trans. Energy Conversion 5, 218 (1990). CrossRef
Lorenz, R.D., Novotny, D.W., IEEE Trans. Ind. Appl. 26, 283 (1990). CrossRef
Kasmieh, T., Lefevre, Y., Roboam, X., Faucher, J., Eur. Phys. J. AP 1, 57 (1998). CrossRef
T. Kasmieh, Modélisation et caractérisation de la saturation magnétique des machines asynchrones en vue de la commande, thèse de doctorat, LEEI-INPT, Toulouse, France, 1998.
B. Semail, Modélisation et réalisation d'un actionneur asynchrone et de sa commande vectorielle, thèse de doctorat, LGEP, Paris IV, France, 1990.
D. Bajodeck, Modèle multi-enroulement de la machine asynchrone, stage de DEA, LEEI-INPT, Toulouse, France, 1994.
N. Sadowski, Modélisation des machines électriques à partir de la résolution des équations du champs en tenant compte du mouvement et du circuit d'alimentation (logiciel EFCAD), thèse de doctorat, LEEI-INPT, Toulouse, France, Octobre 1997.
Lemaire-Semail, B., Louis, J.P., Bouillaut, F., Eur. Phys. J. AP 5, 257 (1998). CrossRef