Published online by Cambridge University Press: 21 March 2007
We studied and compared the reported characteristics of 22 different bulk heterojunction organic solar cells fabricated and characterized by different research institutes. We only considered bulk heterojunction solar cells where both the acceptor (the n-type) and the donor (the p-type) are organic. All cells were characterized under illumination with the standard A.M. 1.5 spectrum and an intensity of 100 mW/cm2. The material properties (the highest occupied (HOMO) and lowest unoccupied molecular orbital (LUMO) of donor and acceptor) and the device characteristics (the open circuit voltage V oc , the short circuit current density J sc , the fill factor FF and the efficiency) are compared and related to each other. One finding is that not the V oc , but the J sc is the limiting factor for obtaining a high efficiency with the current state of technology. Also an empirical threshold of 0.2 eV is found between the LUMO's of the donor and acceptor, necessary for exciton dissociation. There has long been a debate about the origin of the V oc . In recent literature, it is proposed that the V oc is not related with the work function difference of the contacts, but with the energy difference between the LUMO of the acceptor, and the HOMO of the donor (called `the interface bandgap'). A relation between the V oc and the energy levels of donor and acceptor is searched from our empirical study.
This paper has been presented at “ECHOS06”, Paris, 28–30 juin 2006.