Hostname: page-component-cd9895bd7-gvvz8 Total loading time: 0 Render date: 2024-12-25T17:48:10.362Z Has data issue: false hasContentIssue false

Determination of current density distribution in proton exchange membrane fuel cells

Published online by Cambridge University Press:  28 October 2003

D. Candusso
Affiliation:
Laboratoire d'Électrotechnique de Grenoble, UMR 5529 INPG/UJF, CNRS, ENSIEG, BP 46, 38402 Saint-Martin-d'Hères Cedex, France
J. P. Poirot-Crouvezier
Affiliation:
LHPAC, CEA Grenoble, 17 rue des Martyrs, 38054 Grenoble Cedex 9, France
B. Bador*
Affiliation:
SETEX, CEA Grenoble, 17 rue des Martyrs, 38054 Grenoble Cedex 9, France
E. Rullière
Affiliation:
Laboratoire d'Électrotechnique de Grenoble, UMR 5529 INPG/UJF, CNRS, ENSIEG, BP 46, 38402 Saint-Martin-d'Hères Cedex, France
R. Soulier
Affiliation:
Laboratoire d'Électrotechnique de Grenoble, UMR 5529 INPG/UJF, CNRS, ENSIEG, BP 46, 38402 Saint-Martin-d'Hères Cedex, France
J. Y. Voyant
Affiliation:
Laboratoire d'Électrotechnique de Grenoble, UMR 5529 INPG/UJF, CNRS, ENSIEG, BP 46, 38402 Saint-Martin-d'Hères Cedex, France
Get access

Abstract

This study is to look at the distribution of current densities in proton exchange membrane fuel cells (PEMFC) to enable optimisation of fuel cell performance. The feasibility of using a new measurement technique of the local magnetic field, in the conductive plates of the cell was studied. The magnetic field is measured throughout the cell using the Maxwell equations and the current densities calculated. The measurement system and its validation are outlined in the first section. The next section outlines the experimental current density distribution within the cell, operating under standard conditions and special configurations, such as the partially active membrane electrodes assembly (MEA). Using a Matlab or Femlab model of the cell, (which is briefly outlined) our experiments are compared and an attempt made to explain the distribution of the current densities. Finally recent developments of the device are described, which will be used in several tests of PEMFC small stacks.

Keywords

Type
Research Article
Copyright
© EDP Sciences, 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

L. Gerbaux, Modélisation d'une pile à combustible de type hydrogène/air et validation expérimentale, Ph.D. thesis, Institut National Polytechnique de Grenoble, 1996
L.J.M.J. Blomen, M.N. Mugerwa, Fuel Cell Systems (Plenum Press, 1993)
J.P. Poirot-Crouvezier, D. Levrard, P. Baurens, Modélisation dynamique d'une pile De Nora destinée au véhicule électrique, in Proceedings of the Millénaire de l'hydrogène – 10  e conférence canadienne sur l'hydrogène, Québec, 2000
Maggio, G., Recupero, V., Montegazza, C., Modelling of temperature distribution in a solid polymer fuel cell stack, J. Power Sources 62, 167 (1996) CrossRef
Nopponen, M., Mennola, T., Mikkola, M., Hottinen, T., Lund, P., Measurement of Current Distribution in a Free Breathing PEMFC, J. Power Sources, Proceedings of the 7th Grove Fuel Cell Symposium 106, 313 (2002)
Stumper, J., Campbell, S.A., Wilkinson, D.P., Johnson, M.C., Davis, M., In-situ methods for the determination of current distributions in PEM fuel cells, Electrochim. Acta 43, 3773 (1998) CrossRef
Measurement of current density and temperature distribution in polymer electrolyte fuel cells (PEFC) (Institut für technische Thermodynamik, DLR, 2000)
R. Soulier, Cartographie des densités de courant dans une pile à combustible par mesure du champ magnétique induit, Rapport de DEA de l'Institut National Polytechnique de Grenoble, 2001
Flux 2D version 7.50, User's guide (Cedrat 2000) www.cedrat.com/software/software.htm