Article contents
Measuring liquid penetration in the thickness direction of paper
Published online by Cambridge University Press: 25 October 2005
Abstract
We introduce a method to measure liquid absorption into paper based on measuring white light reflected from it. The method was used with 49.8–51.7 g/m2 pilot papers, whose hydrophobicity was tuned by their fiber content and furnish. In addition, one of the samples was internally sized. Impact wetting was used where a droplet of mineral oil, isopropanol or deionized water was applied to the paper surface opposite to the one facing the monitor. The volume of liquid per droplet was (0.9±0.2) μl to (1.3±0.1) μl. The sample was illuminated with an ordinary 20 W light bulb from above. The light intensity reflected off the sample was recorded with a fast charge-coupled camera during the liquid penetration. Optical changes in the paper sample were studied by calculating the average intensity of the reflected light from a selected area. The results showed that the speed of pore wetting, mainly in the z-direction, could be measured with each liquid-sample combination. Hence a digital camera based light reflection measurement can provide information about thickness direction liquid transport in paper.
- Type
- Research Article
- Information
- Copyright
- © EDP Sciences, 2005
References
- 7
- Cited by