Article contents
Techniques for Gamma Rays
Published online by Cambridge University Press: 14 August 2015
Abstract
The detecting systems used in high energy astrophysics are generally more similar to particle detectors than to optical devices. The basic design of the gamma ray instrument depends on whether the energy range is below about 10 MeV and therefore in the region where the Compton effect predominates in the absorption of the gamma-rays, or above that energy where electron-positron pair production is most important. The most usual approach to the detector system in the lower of the two energy intervals is to use a scintillation counter in the center of the detector system to absorb the photons and permit a measure of their energy, and to surround it by another detector which is employed as an active anticoincidence shield to discriminate against charged particles. In the gamma-ray interval above about 10 MeV, the very low flux of gamma rays and the high particle background has directed the development of high energy gamma-ray telescopes towards complicated techniques and large detector arrays. As a result, several investigators have now turned to the spark chamber as the heart of a detector system. Generally, it is surrounded by an anticoincidence system and is triggered by a counter telescope.
- Type
- Part I: Gamma-Ray Astronomy
- Information
- Symposium - International Astronomical Union , Volume 41: New Technique in Space Astronomy , 1971 , pp. 14 - 36
- Copyright
- Copyright © Reidel 1971
References
- 2
- Cited by