Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-22T08:30:33.535Z Has data issue: false hasContentIssue false
  • English
  • Français

Orientation-singularity analysis and orientationability evaluation of a special class of the Stewart–Gough parallel manipulators

Published online by Cambridge University Press:  12 June 2013

Yi Cao ,
Clément Gosselin ,
Hui Zhou ,
Ping Ren  and
Weixi Ji
Yi Cao
Affiliation:
School of Mechanical Engineering, Jiangnan University, Wuxi, Jiangsu 214122, P. R. China. E-mail: [email protected]; [email protected] State Key Laboratory of Robotics and System, Harbin, Heilongjiang Province 150080, P. R. China State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, P. R. China Laboratoire de Robotique, Université Laval, Québec QC G1V 0A6, Canada. E-mails: [email protected], [email protected]
Clément Gosselin
Affiliation:
Laboratoire de Robotique, Université Laval, Québec QC G1V 0A6, Canada. E-mails: [email protected], [email protected]
Hui Zhou
Affiliation:
School of Mechanical Engineering, Jiangnan University, Wuxi, Jiangsu 214122, P. R. China. E-mail: [email protected]; [email protected]
Ping Ren
Affiliation:
Laboratoire de Robotique, Université Laval, Québec QC G1V 0A6, Canada. E-mails: [email protected], [email protected]
Weixi Ji*
Affiliation:
School of Mechanical Engineering, Jiangnan University, Wuxi, Jiangsu 214122, P. R. China. E-mail: [email protected]; [email protected]
*
*Corresponding author. E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Summary

This paper addresses the orientation-singularity analysis and the orientationability evaluation of a special class of the Stewart–Gough parallel manipulators in which the moving and base platforms are two similar semi-symmetrical hexagons. Based on the half-angle transformation, an analytical polynomial of degree 13 that represents the orientation-singularity locus of this special class of parallel manipulators at a given position is derived. Graphical representations of the orientation-singularity locus of this class of manipulators are illustrated with examples to demonstrate the results. Based on the description of the orientation-singularity and nonsingular orientation region of this class of parallel manipulators, a performance index, referred to as orientationability, which describes the orientation capability of this class of manipulators at a given position, is introduced. A discretization algorithm is proposed for computing the orientationability of the special class of parallel manipulators at a given position in the workspace. Moreover, the effects of the design parameters and position parameters on the orientationability are also investigated in detail. Based on the orientationability performance index, another performance index, referred to as practical orientationability, representing the practical orientation capability of the manipulators at a given position, is introduced. In this performance index, singularities, the limitations of active and passive joints and link interferences are all taken into consideration. Furthermore, the practical orientationability of the special class of parallel manipulators studied here is also analyzed over several plane sections of the position-workspace in detail.

Keywords

Stewart–Gough parallel manipulatorNonsingular orientation regionOrientation-singularityOrientationabilityPractical orientationability
Type
Articles
Information
Robotica , Volume 31 , Issue 8 , December 2013 , pp. 1361 - 1372
Copyright
Copyright © Cambridge University Press 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Gough, V. E., “Contribution to Discussion of Papers on Research in Automobile Stability and Control and in Type Performance,” In: Proceedings of the Automobile Division Institution of Mechanical Engineers, 1956–1957, Montreal, Canada, pp. 392.Google Scholar
2.Stewart, D., “A platform with six degrees of freedom,” Proc. Inst. Mech. Eng. 180 (5), 371–378 (1965).CrossRefGoogle Scholar
3.Hunt, K. H., “Structural kinematics of in-parallel-actuated-robot-arms,” J. Mech. Transm. Autom. Des. 105 (7), 705–712 (1983).CrossRefGoogle Scholar
4.Fichter, E. F., “A Stewart platform-based manipulator: General theory and practical construction,” Int. J. Robot. Res. 5 (2), 157–182 (1986).CrossRefGoogle Scholar
5.Merlet, J.-P., “Parallel manipulator part 2: Singular configurations and Grassmann geometry,” Technical report, INRIA, Sophia Antipolis, France (1988) pp. 66–70.Google Scholar
6.Merlet, J.-P., “Singular configurations of parallel manipulators and Grassmann geometry,” Int. J. Robot. Res. 8 (5), 45–56 (1989).CrossRefGoogle Scholar
7.Merlet, J.-P., “Singular Configuration and Direct Kinematics of a New Parallel Manipulator,” In: Proceedings of the IEEE International Conference on Robotics and Automation, Nice, France (1992) pp. 338–343.Google Scholar
8.Gosselin, C. M. and Angeles, J., “Singularity analysis of closed-loop kinematic chains,” IEEE Trans. Robot. Autom. 6 (3), 281–290 (1990).CrossRefGoogle Scholar
9.Mayer-St-Onge, B. and Gosselin, C. M., “Singularity analysis and representation of the general Gough–Stewart platform,” Int. J. Robot. Res. 19 (3), 271–288 (2000).CrossRefGoogle Scholar
10.Di Gregorio, R., “Singularity-locus expression of a class of parallel mechanisms,” Robotica 20 (3), 323–328 (2002).CrossRefGoogle Scholar
11.Huang, Z., Kong, L. F. and Fang, Y. F., Theory and Control of Parallel Robotic Mechanisms Manipulator (Publisher of Mechanical Industry, Beijing, China, 1997).Google Scholar
12.Huang, Z., Zhao, Y. S., Wang, J. and Yu, J. J., “Kinematic principle and geometrical condition of general-linear-complex-special-configuration of parallel manipulators,” Mech. Mach. Theory 34 (8), 1171–1186 (1999).CrossRefGoogle Scholar
13.Huang, Z., Chen, L. H. and Li, Y. W., “The singularity principle and property of Stewart manipulator,” J. Robot. Syst. 20 (4), 163–176 (2003).CrossRefGoogle Scholar
14.Huang, Z., Chen, L. H. and Li, Y. W., “Singular Loci Analysis of 3/6-Stewart Manipulator by Singularity-Equivalent Mechanism,” In: Proceedings of the IEEE International Conference on Robotics and Automation, Taipei, Taiwan (2003) pp. 1881–1886.Google Scholar
15.Cao, Y. and Huang, Z., “Property Identification of the Singularity Loci of the Stewart Manipulator,” In: Proceedings of the The Tenth IASTED on Robotics and Application 2004/RA 447-017, Honolulu, Hawaii, USA (2004) pp. 5–9.Google Scholar
16.Cao, Y. and Huang, Z., “Property identification of the singularity loci of a class of Gough–Stewart manipulators,” Int. J. Robot. Res. 24 (8), 675–685 (2005).Google Scholar
17.Li, H. D., Gosselin, C. M. and Richard, M. J., “Determination of the maximal singularity-free zones in the six-dimensional workspace of the general Gough–Stewart platform,” Mech. Mach. Theory 42 (4), 497–511 (2007).CrossRefGoogle Scholar
18.Gallardo-Alvarado, J., Orozco-Mendoza, H. and Maeda-Sánchez, A., “Acceleration and singularity analyses of a parallel manipulator with a particular topology,” Meccanica 42 (2), 223–238 (2007).CrossRefGoogle Scholar
19.Jiang, Q. M. and Gosselin, C. M., “Determination of the maximal singularity-free orientation workspace for the Gough–Stewart platform,” Mech. Mach. Theory 44 (6), 1281–1293 (2009).CrossRefGoogle Scholar
20.Pernkopf, F. and Husty, M. L., “Singularity-Analysis of Spatial Stewart–Gough Platforms with Planar Base and Platform,” In: Proceedings of the ASME DETC 2002/MECH-34267, Montreal, Canada (2002) pp. 593–600.Google Scholar
21.Li, H. D., Gosselin, C. M. and Richard, M. J., “Analytic Form of the Six-Dimensional Singularity Locus of the General Gough–Stewart Platform,” In: Proceedings of the ASME DETC 2004/MECH-57135, Salt Lake City, Utah, USA (2004) pp. 367–376.Google Scholar
22.Cao, Y., Huang, Z. and Ge, Q. J., “Orientation-Singularity and Orientation Capability Analyses of the Stewart–Gough Manipulator,” In: Proceedings of the ASME DETC 2005/MECH-84556, California, USA (2005) pp. 1009–1015.Google Scholar
23.Cao, Y., Ji, W. X., Liu, Z. H., Zhou, H. and Liu, M. S., “Orientationability and Practical Orientationability Analysis of a Special Class of the Stewart–Gough Parallel Manipulators,” In: Proceedings of the 2010 CCDC, Xuzhou, China (2010) pp. 1808–1813.Google Scholar
24.Li, B. K., Cao, Y., Zhang, W. X. and Huang, Z., “Orientation Singularity and Orientation Capability Analysis of Stewart Platform Based on Unit Quaternion,” In: Proceedings of the 2009 CCDC, Guilin, China (2009) pp. 5735–5739.Google Scholar
25.Cao, Y., Ji, W. X., Li, Z., Zhou, H. and Liu, M. S., “Orientation-Singularity and Nonsingular Orientation-Workspace Analyses of the Stewart–Gough Platform Using Unit Quaternion Representation,” In: Proceedings of the 2010 CCDC, Xuzhou, China (2010) pp. 2282–2287.Google Scholar
26.Bonev, I. A. and Ryu, J., “A new approach to orientation workspace analysis of 6-DOF parallel manipulators,” Mech. Mach. Theory 36 (1), 15–28 (2001).CrossRefGoogle Scholar
27.Yang, G. L. and Chen, I. M., “Equivolumetric partition of solid spheres with applications to orientation workspace analysis of robot manipulators,” IEEE Trans. Robot. Autom. 22 (5), 869–879 (2006).CrossRefGoogle Scholar
28.Bandyopadhyay, S. and Ghosal, A., “Geometric characterization and parametric representation of the singularity manifold of a 6–6 Stewart platform manipulator,” Mech. Mach. Theory 41 (11), 1377–1400 (2006).CrossRefGoogle Scholar
29.Karger, A., “Singularities and self-motions of equiform platforms,” Mech. Mach. Theory 36 (7), 801–815 (2001).CrossRefGoogle Scholar
30.Karger, A., “Architecture singular planar parallel manipulators,” Mech. Mach. Theory 38 (11), 727–736 (2003).CrossRefGoogle Scholar
31.Cao, Y., Huang, Z., Zhou, H. and Ji, W. X., “Orientation-workspace analysis of a special class of the Stewart–Gough parallel manipulators,” Robotica 28 (7), 989–1000 (2010).CrossRefGoogle Scholar
32.Cao, Y., Huang, Z., Zhang, Q. J. and Zhou, H., “Orientation-singularity and nonsingular orientation-workspace analysis of the semi- regular Stewart–Gough platform manipulator,” Adv. Robot. 24 (15), 2119–2135 (2010).CrossRefGoogle Scholar