Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-26T12:24:51.574Z Has data issue: false hasContentIssue false
  • English
  • Français

A novel PID control parameters tuning approach for robot manipulators mounted on oscillatory bases

Published online by Cambridge University Press:  18 January 2007

J. Lin  and
Z.-Z. Huang
J. Lin*
Affiliation:
Department of Mechanical Engineering, Ching Yun University, 229, Chien-Hsin Road, Jung-Li City 320, Taiwan, R.O.C.
Z.-Z. Huang
Affiliation:
Department of Mechanical Engineering, Ching Yun University, 229, Chien-Hsin Road, Jung-Li City 320, Taiwan, R.O.C.
*
*Corresponding author. E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Summary

This research focuses on the issue of dynamic modeling and controlling a robotic manipulator attached to a compliant base. Such a system is known under the name macro–micro system, characterized by the number of control actuators being less than the number of state variables. The equations of motion for a two-link planar elbow arm mounted on an oscillatory base has been presented in this investigation. In order to study the sensitivity of tuning the PID parameters to achieve the desired performance, the Grey relational analysis has first been proposed. Therefore, the aim of this work is to apply Grey theory to optimize parameters for partial states feedback of a PID controller for such a structure. The experimental results of the proposed methodology also show that it is technically and economically feasible to develop a low-cost, reliable, automatic, less time-consuming controller for robotics mounted on oscillatory bases.

Keywords

Compliant basePIDGrey theory
Type
Article
Information
Robotica , Volume 25 , Issue 4 , July 2007 , pp. 467 - 477
Copyright
Copyright © Cambridge University Press 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Lew, J. Y. and Moon, S.-M., “A simple active damping control for compliant base manipulators,” IEEE/ASME Trans. Mechatronics 6 (3), 305–310 (2001).CrossRefGoogle Scholar
2. Toda, M., “Robust Control for Mechanical Systems With Oscillatory Bases,” Proceedings of the IEEE Conference on Systems, Man, and Cybernetics, Tokyo, Japan (1999) vol. 2, pp. 878–893.Google Scholar
3. Toda, M., “An H ∞ control-based approach to robust control of mechanical systems with oscillatory bases,” IEEE Trans. Robot. Autom. 20 (2), 283–296 (2004).CrossRefGoogle Scholar
4. Nenchev, D. N., Yoshida, K. and Uchiyama, M., “Reaction Null-Space Based Control of Flexible Structure Mounted Manipulator Systems,” Proceedings of the 35th Conference on Decision and Control, Kobe, Japan (1996) pp. 4118–4123.CrossRefGoogle Scholar
5. Nenchev, D. N., Yoshida, K., Vichitkulsawat, P., Konno, A. and Uchiyama, M., “Experiments on Reaction Null-Space Based Decouple Control of a Flexible Structure Mounted Manipulator System,” Proceedings of the IEEE Conference on Robotics and Automation, Albuqerque, New Mexico (1997) pp. 2528–2534.CrossRefGoogle Scholar
6. Magee, D. P. and Book, W. J., “Filtering Micro-Manipulator Wrist Commands to Prevent Flexible Base Motion,” Proceedings of the American Control Conference, Seattle, Washington, USA (1995) pp. 924–928.Google Scholar
7. Lew, J. Y. and Moon, S.-M., “Acceleration Feedback Control of Compliant Base Manipulators,” Proceedings of the 1999 American Control Conference, San Diego, CA (1999) pp. 1955–1959.Google Scholar
8. George, L. E. and Book, W. J., “Inertial vibration damping control of a flexible base manipulator,” IEEE/ASME Trans. Mechatronics 8 (2), 268–271 (2003).CrossRefGoogle Scholar
9. Sharon, and Hardt, D., “Enhancement of Robot Accuracy Using End-Point Feedback and a Macro–Micro Manipulator System,” Proceedings of the 1984 American Control Conference, San Diego, CA (1984) pp. 1836–1842.CrossRefGoogle Scholar
10. Cannon, D. W., Magee, D. P. and Book, W. J., “Experimental Study on Micro/Macro Manipulator Vibration Control,” Proceedings of the IEEE International Conference on Robotics and Automation, Minneapolis, MN (1996) pp. 2549–2554.CrossRefGoogle Scholar
11. Yoshida, K., Nenchev, D. and Uchiyama, M., “Vibration suppression and zero reaction maneuvers of flexible space structure mounted manipulators,” Smart Mater. Struct. 8 (6), 847–856 (1999).CrossRefGoogle Scholar
12. Book, W. and Loper, J., “Inverse Dynamics for Commanding Micromanipulator Inertial Forces to Damp Micromanipulator Vibration,” Proceedings of the IEEE Robot Society of Japan International Conference on Intelligent Robots and Systems (1999) vol. 2, pp. 707–714.Google Scholar
13. Spong, M. W., “Modeling and control of elastic joints,” ASME J. Dyn. Syst. Meas. Control 109, 310–319 (1987).CrossRefGoogle Scholar
14. Osuka, K. and Matsuno, F., “On Robustness of Passivity of Manipulators,” Proceedings of the IEEE Conference on Decision and Control, Phoenix, Arizona, USA (1999) pp. 3406–3409.Google Scholar
15. Toda, M., “An H ∞ control-based approach to robust control of mechanical systems with oscillatory bases,” IEEE Trans. Robot. Autom. 20 (2), 283–296 (2004).CrossRefGoogle Scholar
16. Lin, J. and Lewis, F. L., “Fuzzy Controller for Flexible Link Robot Arm by Reduced-Order Techniques,” IEE Proceedings—Control Theory and Applications (2002) vol. 149, no. (3), pp. 177–187.Google Scholar
17. Ueda, J. and Yoshikawa, T., “Mode-shape compensator for improving robustness of manipulator mounted on flexible base,” IEEE Trans. Robot. Autom. 20 (2), 256–268 (2004).CrossRefGoogle Scholar
18. Ueda, J. and Yoshikawa, T., “Robust arm configuration of manipulator mounted on flexible base,” IEEE Trans. Robot. 20 (4), 781–789 (2004).CrossRefGoogle Scholar
19. Mann, G. K., Hu, B.-G. and Gosine, R. G., “Analysis of direct action fuzzy PID controller structures,” IEEE Trans. Syst. Man Cybern.—Part B: Cybern. 29 (3), 371–388 Jun. (1999).CrossRefGoogle ScholarPubMed
20. Visioli, A., “Fuzzy logic based set-point weight tuning of PID controllers,” IEEE Trans. Syst. Man Cybern.—Part A: Syst. Hum. 29 (6), 587–592 Nov. (1999).CrossRefGoogle Scholar
21. Hang, C. C., Åström, K. J. and Ho, W. K., “Refinements of the Ziegler–Nichols tuning formula,” IEE Proceedings-D (1991) vol. 138, no. 2, pp. 111–118.CrossRefGoogle Scholar
22. Deng, J., “Introduction to Grey system theory,” J. Grey Syst. 1, 1–24 (1989).Google Scholar
23. Lewis, F. L., Abdallah, C. T. and Dawson, D. M., Control of Robot Manipulators (Macmillan, London 1993).Google Scholar
24. Lin, J., “A Hierarchical Supervisory Fuzzy Controller for Robot Manipulators With Oscillatory Bases,” Proceedings of the FUZZ-IEEE, Vancouver, BC, Canada Jul. 16–21, (2006) pp. 10861–10868.Google Scholar
25. Lin, J., Tsai, K. K. and Chien, W.-S., “Optimization of PID parameters for linear motion positioning control using Grey prediction,” J. Ching Yun Univ. 24 (2), 1–24 (2004). (in Chinese)Google Scholar
26. Ji, C. C., Chang, H. C. and Lin, J., “A genetic algorithm and Grey predictor based fuzzy logic controller,” J. Grey Sits. 16 (4), 347–356 (2004).Google Scholar